{"title":"Philmac UTC x PE Joiners","description":"","products":[{"product_id":"philmac-universal-transition-coupler-15-21mm-x-20mm-1-2","title":"Philmac Universal Transition Coupler UTC x POL - 15-21mm x 20mm - 88103200","description":"\n\u003ch4\u003eUniversal Transition Coupling - UTC\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eThe problem solver\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProviding complete pipe connection flexibility, the UTC is the first choice for connecting dissimilar pipe materials including PE, PVC, ABS, copper, stainless steel, galvanised iron and lead.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFast and easy installation – Slide and Tighten technology\u003c\/li\u003e\n\u003cli\u003eComplete security – pre-assembled and no risk of damage to pipes when fitting\u003c\/li\u003e\n\u003cli\u003eHigh performance materials – manufactured from advanced thermoplastic engineered materials\u003c\/li\u003e\n\u003cli\u003eComplete coverage – connecting a wide variety of pipes together including PE, PVC, ABS, copper, stainless steel, galvanised iron and lead.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe UTC is a unique range of mechanical compression fittings that provide the ultimate in pipe connection flexibility.\u003c\/p\u003e\n\u003cp\u003eOur Slide and Tighten technology means no pipe preparation is needed, no force is required to push the pipe past the seal. This means faster installation because the fitting seals on the outside of the pipe.\u003c\/p\u003e\n\u003ch4\u003eFast and easy installation\u003c\/h4\u003e\n\u003cp\u003eSlide and Tighten the Philmac UTC incorporates all the benefits of Philmac’s Slide and Tighten technology. Simply witness mark the pipe against the flange on the fitting, and then insert the pipe to the correct depth. The nut can then be tightened using a wrench. The UTC is fully installed when the nut can no longer be tightened with reasonable force. No special tools are required and the Philmac UTC is supplied ready to use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy disassembly:\u003c\/strong\u003e The design of the UTC means that once the nut is backed off, the pipe can easily be removed from the fitting.\u003c\/p\u003e\n\u003ch4\u003eComplete security\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eVisual stop:\u003c\/strong\u003e The mechanical advantage of the nut thread compresses the seal into position, eliminating resistance when inserting the pipe into the fitting, so there is no risk of seal distortion or displacement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo loose components:\u003c\/strong\u003e The Philmac UTC is pre-assembled and ready to use, there are no loose components. There is no need for individual assembly of a grip ring, sealing ring or nut. All that is required is the insertion of the pipe and tightening of the nut.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDielectric (insulating) fitting:\u003c\/strong\u003e UTC fittings are insulating and are a dielectric fitting for use between dissimilar metals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnd load resistant:\u003c\/strong\u003e UTC fittings are fully end load resistant and do not require the use of thrust blocks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApprovals:\u003c\/strong\u003e Philmac UTC fittings are WRAS approved for potable water use.\u003c\/p\u003e\n\u003ch4\u003eHigh performance materials\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eManufactured from advanced thermoplastic engineered materials:\u003c\/strong\u003e The Philmac UTC is manufactured from lightweight high performance thermoplastic materials with outstanding impact, UV, chemical and corrosion resistance. The UTC end contains hard stainless steel grippers which provide superior end load resistance. The Philmac UTC is pressure rated to 12.5 Bar at 20°C to meet the needs of high pressure systems.\u003c\/p\u003e\n\u003ch4\u003eComplete coverage\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eWide range: The Philmac UTC range is comprehensive:\u003c\/strong\u003e Straight and reducing couplers, elbows and male adaptors, in both transition (PE to UTC) and double ended versions (UTC to UTC) ranging from 15mm to 61mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnects PE to a wide variety of pipes: \u003c\/strong\u003e PVC, copper, galvanised iron, ABS, lead, stainless steel, steel, polypropylene and PEX\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnects to a wide variety of pipes: \u003c\/strong\u003e PVC, copper, galvanised iron, ABS, lead, stainless steel, steel, polypropylene and PEX\u003c\/p\u003e\n\u003cp\u003e*Stock dependant\u003c\/p\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"15-21mm x 20mm","offer_id":53171742015755,"sku":"PHI00000860","price":17.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/PHI00000860.png?v=1751762538"},{"product_id":"philmac-universal-transition-coupler-15-21mm-x-25mm-3-4","title":"Philmac Universal Transition Coupler UTC x POL - 15-21mm x 25mm - 88103300","description":"\n\u003ch4\u003eUniversal Transition Coupling - UTC\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eThe problem solver\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProviding complete pipe connection flexibility, the UTC is the first choice for connecting dissimilar pipe materials including PE, PVC, ABS, copper, stainless steel, galvanised iron and lead.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFast and easy installation – Slide and Tighten technology\u003c\/li\u003e\n\u003cli\u003eComplete security – pre-assembled and no risk of damage to pipes when fitting\u003c\/li\u003e\n\u003cli\u003eHigh performance materials – manufactured from advanced thermoplastic engineered materials\u003c\/li\u003e\n\u003cli\u003eComplete coverage – connecting a wide variety of pipes together including PE, PVC, ABS, copper, stainless steel, galvanised iron and lead.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe UTC is a unique range of mechanical compression fittings that provide the ultimate in pipe connection flexibility.\u003c\/p\u003e\n\u003cp\u003eOur Slide and Tighten technology means no pipe preparation is needed, no force is required to push the pipe past the seal. This means faster installation because the fitting seals on the outside of the pipe.\u003c\/p\u003e\n\u003ch4\u003eFast and easy installation\u003c\/h4\u003e\n\u003cp\u003eSlide and Tighten the Philmac UTC incorporates all the benefits of Philmac’s Slide and Tighten technology. Simply witness mark the pipe against the flange on the fitting, and then insert the pipe to the correct depth. The nut can then be tightened using a wrench. The UTC is fully installed when the nut can no longer be tightened with reasonable force. No special tools are required and the Philmac UTC is supplied ready to use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy disassembly:\u003c\/strong\u003e The design of the UTC means that once the nut is backed off, the pipe can easily be removed from the fitting.\u003c\/p\u003e\n\u003ch4\u003eComplete security\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eVisual stop:\u003c\/strong\u003e The mechanical advantage of the nut thread compresses the seal into position, eliminating resistance when inserting the pipe into the fitting, so there is no risk of seal distortion or displacement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo loose components:\u003c\/strong\u003e The Philmac UTC is pre-assembled and ready to use, there are no loose components. There is no need for individual assembly of a grip ring, sealing ring or nut. All that is required is the insertion of the pipe and tightening of the nut.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDielectric (insulating) fitting:\u003c\/strong\u003e UTC fittings are insulating and are a dielectric fitting for use between dissimilar metals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnd load resistant:\u003c\/strong\u003e UTC fittings are fully end load resistant and do not require the use of thrust blocks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApprovals:\u003c\/strong\u003e Philmac UTC fittings are WRAS approved for potable water use.\u003c\/p\u003e\n\u003ch4\u003eHigh performance materials\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eManufactured from advanced thermoplastic engineered materials:\u003c\/strong\u003e The Philmac UTC is manufactured from lightweight high performance thermoplastic materials with outstanding impact, UV, chemical and corrosion resistance. The UTC end contains hard stainless steel grippers which provide superior end load resistance. The Philmac UTC is pressure rated to 12.5 Bar at 20°C to meet the needs of high pressure systems.\u003c\/p\u003e\n\u003ch4\u003eComplete coverage\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eWide range: The Philmac UTC range is comprehensive:\u003c\/strong\u003e Straight and reducing couplers, elbows and male adaptors, in both transition (PE to UTC) and double ended versions (UTC to UTC) ranging from 15mm to 61mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnects PE to a wide variety of pipes: \u003c\/strong\u003e PVC, copper, galvanised iron, ABS, lead, stainless steel, steel, polypropylene and PEX\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnects to a wide variety of pipes: \u003c\/strong\u003e PVC, copper, galvanised iron, ABS, lead, stainless steel, steel, polypropylene and PEX\u003c\/p\u003e\n\u003cp\u003e*Stock dependant\u003c\/p\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"15-21mm x 25mm","offer_id":53171742081291,"sku":"PHI00000870","price":17.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/PHI00000860.png?v=1751762538"},{"product_id":"philmac-universal-transition-coupler-21-27mm-x-20mm-1-2","title":"Philmac Universal Transition Coupler UTC x POL - 21-27mm x 20mm - 88104200","description":"\n\u003ch4\u003eUniversal Transition Coupling - UTC\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eThe problem solver\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProviding complete pipe connection flexibility, the UTC is the first choice for connecting dissimilar pipe materials including PE, PVC, ABS, copper, stainless steel, galvanised iron and lead.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFast and easy installation – Slide and Tighten technology\u003c\/li\u003e\n\u003cli\u003eComplete security – pre-assembled and no risk of damage to pipes when fitting\u003c\/li\u003e\n\u003cli\u003eHigh performance materials – manufactured from advanced thermoplastic engineered materials\u003c\/li\u003e\n\u003cli\u003eComplete coverage – connecting a wide variety of pipes together including PE, PVC, ABS, copper, stainless steel, galvanised iron and lead.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe UTC is a unique range of mechanical compression fittings that provide the ultimate in pipe connection flexibility.\u003c\/p\u003e\n\u003cp\u003eOur Slide and Tighten technology means no pipe preparation is needed, no force is required to push the pipe past the seal. This means faster installation because the fitting seals on the outside of the pipe.\u003c\/p\u003e\n\u003ch4\u003eFast and easy installation\u003c\/h4\u003e\n\u003cp\u003eSlide and Tighten the Philmac UTC incorporates all the benefits of Philmac’s Slide and Tighten technology. Simply witness mark the pipe against the flange on the fitting, and then insert the pipe to the correct depth. The nut can then be tightened using a wrench. The UTC is fully installed when the nut can no longer be tightened with reasonable force. No special tools are required and the Philmac UTC is supplied ready to use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy disassembly:\u003c\/strong\u003e The design of the UTC means that once the nut is backed off, the pipe can easily be removed from the fitting.\u003c\/p\u003e\n\u003ch4\u003eComplete security\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eVisual stop:\u003c\/strong\u003e The mechanical advantage of the nut thread compresses the seal into position, eliminating resistance when inserting the pipe into the fitting, so there is no risk of seal distortion or displacement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo loose components:\u003c\/strong\u003e The Philmac UTC is pre-assembled and ready to use, there are no loose components. There is no need for individual assembly of a grip ring, sealing ring or nut. All that is required is the insertion of the pipe and tightening of the nut.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDielectric (insulating) fitting:\u003c\/strong\u003e UTC fittings are insulating and are a dielectric fitting for use between dissimilar metals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnd load resistant:\u003c\/strong\u003e UTC fittings are fully end load resistant and do not require the use of thrust blocks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApprovals:\u003c\/strong\u003e Philmac UTC fittings are WRAS approved for potable water use.\u003c\/p\u003e\n\u003ch4\u003eHigh performance materials\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eManufactured from advanced thermoplastic engineered materials:\u003c\/strong\u003e The Philmac UTC is manufactured from lightweight high performance thermoplastic materials with outstanding impact, UV, chemical and corrosion resistance. The UTC end contains hard stainless steel grippers which provide superior end load resistance. The Philmac UTC is pressure rated to 12.5 Bar at 20°C to meet the needs of high pressure systems.\u003c\/p\u003e\n\u003ch4\u003eComplete coverage\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eWide range: The Philmac UTC range is comprehensive:\u003c\/strong\u003e Straight and reducing couplers, elbows and male adaptors, in both transition (PE to UTC) and double ended versions (UTC to UTC) ranging from 15mm to 61mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnects PE to a wide variety of pipes: \u003c\/strong\u003e PVC, copper, galvanised iron, ABS, lead, stainless steel, steel, polypropylene and PEX\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnects to a wide variety of pipes: \u003c\/strong\u003e PVC, copper, galvanised iron, ABS, lead, stainless steel, steel, polypropylene and PEX\u003c\/p\u003e\n\u003cp\u003e*Stock dependant\u003c\/p\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"21-27mm x 20mm","offer_id":53171742114059,"sku":"PHI00000880","price":17.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/PHI00000860.png?v=1751762538"},{"product_id":"philmac-universal-transition-coupler-21-27mm-x-25mm-3-4","title":"Philmac Universal Transition Coupler UTC x POL - 21-27mm x 25mm - 88104300","description":"\n\u003ch4\u003eUniversal Transition Coupling - UTC\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eThe problem solver\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProviding complete pipe connection flexibility, the UTC is the first choice for connecting dissimilar pipe materials including PE, PVC, ABS, copper, stainless steel, galvanised iron and lead.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFast and easy installation – Slide and Tighten technology\u003c\/li\u003e\n\u003cli\u003eComplete security – pre-assembled and no risk of damage to pipes when fitting\u003c\/li\u003e\n\u003cli\u003eHigh performance materials – manufactured from advanced thermoplastic engineered materials\u003c\/li\u003e\n\u003cli\u003eComplete coverage – connecting a wide variety of pipes together including PE, PVC, ABS, copper, stainless steel, galvanised iron and lead.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe UTC is a unique range of mechanical compression fittings that provide the ultimate in pipe connection flexibility.\u003c\/p\u003e\n\u003cp\u003eOur Slide and Tighten technology means no pipe preparation is needed, no force is required to push the pipe past the seal. This means faster installation because the fitting seals on the outside of the pipe.\u003c\/p\u003e\n\u003ch4\u003eFast and easy installation\u003c\/h4\u003e\n\u003cp\u003eSlide and Tighten the Philmac UTC incorporates all the benefits of Philmac’s Slide and Tighten technology. Simply witness mark the pipe against the flange on the fitting, and then insert the pipe to the correct depth. The nut can then be tightened using a wrench. The UTC is fully installed when the nut can no longer be tightened with reasonable force. No special tools are required and the Philmac UTC is supplied ready to use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy disassembly:\u003c\/strong\u003e The design of the UTC means that once the nut is backed off, the pipe can easily be removed from the fitting.\u003c\/p\u003e\n\u003ch4\u003eComplete security\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eVisual stop:\u003c\/strong\u003e The mechanical advantage of the nut thread compresses the seal into position, eliminating resistance when inserting the pipe into the fitting, so there is no risk of seal distortion or displacement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo loose components:\u003c\/strong\u003e The Philmac UTC is pre-assembled and ready to use, there are no loose components. There is no need for individual assembly of a grip ring, sealing ring or nut. All that is required is the insertion of the pipe and tightening of the nut.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDielectric (insulating) fitting:\u003c\/strong\u003e UTC fittings are insulating and are a dielectric fitting for use between dissimilar metals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnd load resistant:\u003c\/strong\u003e UTC fittings are fully end load resistant and do not require the use of thrust blocks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApprovals:\u003c\/strong\u003e Philmac UTC fittings are WRAS approved for potable water use.\u003c\/p\u003e\n\u003ch4\u003eHigh performance materials\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eManufactured from advanced thermoplastic engineered materials:\u003c\/strong\u003e The Philmac UTC is manufactured from lightweight high performance thermoplastic materials with outstanding impact, UV, chemical and corrosion resistance. The UTC end contains hard stainless steel grippers which provide superior end load resistance. The Philmac UTC is pressure rated to 12.5 Bar at 20°C to meet the needs of high pressure systems.\u003c\/p\u003e\n\u003ch4\u003eComplete coverage\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eWide range: The Philmac UTC range is comprehensive:\u003c\/strong\u003e Straight and reducing couplers, elbows and male adaptors, in both transition (PE to UTC) and double ended versions (UTC to UTC) ranging from 15mm to 61mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnects PE to a wide variety of pipes: \u003c\/strong\u003e PVC, copper, galvanised iron, ABS, lead, stainless steel, steel, polypropylene and PEX\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnects to a wide variety of pipes: \u003c\/strong\u003e PVC, copper, galvanised iron, ABS, lead, stainless steel, steel, polypropylene and PEX\u003c\/p\u003e\n\u003cp\u003e*Stock dependant\u003c\/p\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"21-27mm x 25mm","offer_id":53171742310667,"sku":"PHI00000890","price":17.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/PHI00000860.png?v=1751762538"},{"product_id":"philmac-universal-transition-coupler-27-34mm-x-20mm-1-2","title":"Philmac Universal Transition Coupler UTC x POL - 27-34mm x 20mm - 88105200","description":"\n\u003ch4\u003eUniversal Transition Coupling - UTC\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eThe problem solver\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProviding complete pipe connection flexibility, the UTC is the first choice for connecting dissimilar pipe materials including PE, PVC, ABS, copper, stainless steel, galvanised iron and lead.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFast and easy installation – Slide and Tighten technology\u003c\/li\u003e\n\u003cli\u003eComplete security – pre-assembled and no risk of damage to pipes when fitting\u003c\/li\u003e\n\u003cli\u003eHigh performance materials – manufactured from advanced thermoplastic engineered materials\u003c\/li\u003e\n\u003cli\u003eComplete coverage – connecting a wide variety of pipes together including PE, PVC, ABS, copper, stainless steel, galvanised iron and lead.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe UTC is a unique range of mechanical compression fittings that provide the ultimate in pipe connection flexibility.\u003c\/p\u003e\n\u003cp\u003eOur Slide and Tighten technology means no pipe preparation is needed, no force is required to push the pipe past the seal. This means faster installation because the fitting seals on the outside of the pipe.\u003c\/p\u003e\n\u003ch4\u003eFast and easy installation\u003c\/h4\u003e\n\u003cp\u003eSlide and Tighten the Philmac UTC incorporates all the benefits of Philmac’s Slide and Tighten technology. Simply witness mark the pipe against the flange on the fitting, and then insert the pipe to the correct depth. The nut can then be tightened using a wrench. The UTC is fully installed when the nut can no longer be tightened with reasonable force. No special tools are required and the Philmac UTC is supplied ready to use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy disassembly:\u003c\/strong\u003e The design of the UTC means that once the nut is backed off, the pipe can easily be removed from the fitting.\u003c\/p\u003e\n\u003ch4\u003eComplete security\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eVisual stop:\u003c\/strong\u003e The mechanical advantage of the nut thread compresses the seal into position, eliminating resistance when inserting the pipe into the fitting, so there is no risk of seal distortion or displacement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo loose components:\u003c\/strong\u003e The Philmac UTC is pre-assembled and ready to use, there are no loose components. There is no need for individual assembly of a grip ring, sealing ring or nut. All that is required is the insertion of the pipe and tightening of the nut.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDielectric (insulating) fitting:\u003c\/strong\u003e UTC fittings are insulating and are a dielectric fitting for use between dissimilar metals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnd load resistant:\u003c\/strong\u003e UTC fittings are fully end load resistant and do not require the use of thrust blocks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApprovals:\u003c\/strong\u003e Philmac UTC fittings are WRAS approved for potable water use.\u003c\/p\u003e\n\u003ch4\u003eHigh performance materials\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eManufactured from advanced thermoplastic engineered materials:\u003c\/strong\u003e The Philmac UTC is manufactured from lightweight high performance thermoplastic materials with outstanding impact, UV, chemical and corrosion resistance. The UTC end contains hard stainless steel grippers which provide superior end load resistance. The Philmac UTC is pressure rated to 12.5 Bar at 20°C to meet the needs of high pressure systems.\u003c\/p\u003e\n\u003ch4\u003eComplete coverage\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eWide range: The Philmac UTC range is comprehensive:\u003c\/strong\u003e Straight and reducing couplers, elbows and male adaptors, in both transition (PE to UTC) and double ended versions (UTC to UTC) ranging from 15mm to 61mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnects PE to a wide variety of pipes: \u003c\/strong\u003e PVC, copper, galvanised iron, ABS, lead, stainless steel, steel, polypropylene and PEX\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnects to a wide variety of pipes: \u003c\/strong\u003e PVC, copper, galvanised iron, ABS, lead, stainless steel, steel, polypropylene and PEX\u003c\/p\u003e\n\u003cp\u003e*Stock dependant\u003c\/p\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"27-34mm x 20mm","offer_id":53171742376203,"sku":"PHI00000900","price":20.37,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/PHI00000860.png?v=1751762538"},{"product_id":"philmac-universal-transition-coupler-27-34mm-x-25mm-3-4","title":"Philmac Universal Transition Coupler UTC x POL - 27-34mm x 25mm - 88105300","description":"\n\u003ch4\u003eUniversal Transition Coupling - UTC\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eThe problem solver\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProviding complete pipe connection flexibility, the UTC is the first choice for connecting dissimilar pipe materials including PE, PVC, ABS, copper, stainless steel, galvanised iron and lead.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFast and easy installation – Slide and Tighten technology\u003c\/li\u003e\n\u003cli\u003eComplete security – pre-assembled and no risk of damage to pipes when fitting\u003c\/li\u003e\n\u003cli\u003eHigh performance materials – manufactured from advanced thermoplastic engineered materials\u003c\/li\u003e\n\u003cli\u003eComplete coverage – connecting a wide variety of pipes together including PE, PVC, ABS, copper, stainless steel, galvanised iron and lead.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe UTC is a unique range of mechanical compression fittings that provide the ultimate in pipe connection flexibility.\u003c\/p\u003e\n\u003cp\u003eOur Slide and Tighten technology means no pipe preparation is needed, no force is required to push the pipe past the seal. This means faster installation because the fitting seals on the outside of the pipe.\u003c\/p\u003e\n\u003ch4\u003eFast and easy installation\u003c\/h4\u003e\n\u003cp\u003eSlide and Tighten the Philmac UTC incorporates all the benefits of Philmac’s Slide and Tighten technology. Simply witness mark the pipe against the flange on the fitting, and then insert the pipe to the correct depth. The nut can then be tightened using a wrench. The UTC is fully installed when the nut can no longer be tightened with reasonable force. No special tools are required and the Philmac UTC is supplied ready to use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy disassembly:\u003c\/strong\u003e The design of the UTC means that once the nut is backed off, the pipe can easily be removed from the fitting.\u003c\/p\u003e\n\u003ch4\u003eComplete security\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eVisual stop:\u003c\/strong\u003e The mechanical advantage of the nut thread compresses the seal into position, eliminating resistance when inserting the pipe into the fitting, so there is no risk of seal distortion or displacement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo loose components:\u003c\/strong\u003e The Philmac UTC is pre-assembled and ready to use, there are no loose components. There is no need for individual assembly of a grip ring, sealing ring or nut. All that is required is the insertion of the pipe and tightening of the nut.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDielectric (insulating) fitting:\u003c\/strong\u003e UTC fittings are insulating and are a dielectric fitting for use between dissimilar metals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnd load resistant:\u003c\/strong\u003e UTC fittings are fully end load resistant and do not require the use of thrust blocks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApprovals:\u003c\/strong\u003e Philmac UTC fittings are WRAS approved for potable water use.\u003c\/p\u003e\n\u003ch4\u003eHigh performance materials\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eManufactured from advanced thermoplastic engineered materials:\u003c\/strong\u003e The Philmac UTC is manufactured from lightweight high performance thermoplastic materials with outstanding impact, UV, chemical and corrosion resistance. The UTC end contains hard stainless steel grippers which provide superior end load resistance. The Philmac UTC is pressure rated to 12.5 Bar at 20°C to meet the needs of high pressure systems.\u003c\/p\u003e\n\u003ch4\u003eComplete coverage\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eWide range: The Philmac UTC range is comprehensive:\u003c\/strong\u003e Straight and reducing couplers, elbows and male adaptors, in both transition (PE to UTC) and double ended versions (UTC to UTC) ranging from 15mm to 61mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnects PE to a wide variety of pipes: \u003c\/strong\u003e PVC, copper, galvanised iron, ABS, lead, stainless steel, steel, polypropylene and PEX\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnects to a wide variety of pipes: \u003c\/strong\u003e PVC, copper, galvanised iron, ABS, lead, stainless steel, steel, polypropylene and PEX\u003c\/p\u003e\n\u003cp\u003e*Stock dependant\u003c\/p\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"27-34mm x 25mm","offer_id":53171742441739,"sku":"PHI00000910","price":20.37,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/PHI00000860.png?v=1751762538"},{"product_id":"philmac-universal-transition-coupler-27-34mm-x-32mm-1","title":"Philmac Universal Transition Coupler UTC x POL - 27-34mm x 32mm - 88105400","description":"\n\u003ch4\u003eUniversal Transition Coupling - UTC\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eThe problem solver\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProviding complete pipe connection flexibility, the UTC is the first choice for connecting dissimilar pipe materials including PE, PVC, ABS, copper, stainless steel, galvanised iron and lead.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFast and easy installation – Slide and Tighten technology\u003c\/li\u003e\n\u003cli\u003eComplete security – pre-assembled and no risk of damage to pipes when fitting\u003c\/li\u003e\n\u003cli\u003eHigh performance materials – manufactured from advanced thermoplastic engineered materials\u003c\/li\u003e\n\u003cli\u003eComplete coverage – connecting a wide variety of pipes together including PE, PVC, ABS, copper, stainless steel, galvanised iron and lead.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe UTC is a unique range of mechanical compression fittings that provide the ultimate in pipe connection flexibility.\u003c\/p\u003e\n\u003cp\u003eOur Slide and Tighten technology means no pipe preparation is needed, no force is required to push the pipe past the seal. This means faster installation because the fitting seals on the outside of the pipe.\u003c\/p\u003e\n\u003ch4\u003eFast and easy installation\u003c\/h4\u003e\n\u003cp\u003eSlide and Tighten the Philmac UTC incorporates all the benefits of Philmac’s Slide and Tighten technology. Simply witness mark the pipe against the flange on the fitting, and then insert the pipe to the correct depth. The nut can then be tightened using a wrench. The UTC is fully installed when the nut can no longer be tightened with reasonable force. No special tools are required and the Philmac UTC is supplied ready to use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy disassembly:\u003c\/strong\u003e The design of the UTC means that once the nut is backed off, the pipe can easily be removed from the fitting.\u003c\/p\u003e\n\u003ch4\u003eComplete security\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eVisual stop:\u003c\/strong\u003e The mechanical advantage of the nut thread compresses the seal into position, eliminating resistance when inserting the pipe into the fitting, so there is no risk of seal distortion or displacement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo loose components:\u003c\/strong\u003e The Philmac UTC is pre-assembled and ready to use, there are no loose components. There is no need for individual assembly of a grip ring, sealing ring or nut. All that is required is the insertion of the pipe and tightening of the nut.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDielectric (insulating) fitting:\u003c\/strong\u003e UTC fittings are insulating and are a dielectric fitting for use between dissimilar metals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnd load resistant:\u003c\/strong\u003e UTC fittings are fully end load resistant and do not require the use of thrust blocks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApprovals:\u003c\/strong\u003e Philmac UTC fittings are WRAS approved for potable water use.\u003c\/p\u003e\n\u003ch4\u003eHigh performance materials\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eManufactured from advanced thermoplastic engineered materials:\u003c\/strong\u003e The Philmac UTC is manufactured from lightweight high performance thermoplastic materials with outstanding impact, UV, chemical and corrosion resistance. The UTC end contains hard stainless steel grippers which provide superior end load resistance. The Philmac UTC is pressure rated to 12.5 Bar at 20°C to meet the needs of high pressure systems.\u003c\/p\u003e\n\u003ch4\u003eComplete coverage\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eWide range: The Philmac UTC range is comprehensive:\u003c\/strong\u003e Straight and reducing couplers, elbows and male adaptors, in both transition (PE to UTC) and double ended versions (UTC to UTC) ranging from 15mm to 61mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnects PE to a wide variety of pipes: \u003c\/strong\u003e PVC, copper, galvanised iron, ABS, lead, stainless steel, steel, polypropylene and PEX\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnects to a wide variety of pipes: \u003c\/strong\u003e PVC, copper, galvanised iron, ABS, lead, stainless steel, steel, polypropylene and PEX\u003c\/p\u003e\n\u003cp\u003e*Stock dependant\u003c\/p\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"27-34mm x 32mm","offer_id":53171742474507,"sku":"PHI00000920","price":23.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/PHI00000860.png?v=1751762538"},{"product_id":"philmac-universal-transition-coupler-34-39mm-x-32mm-1","title":"Philmac Universal Transition Coupler UTC x POL - 34-39mm x 32mm  - 88107400","description":"\n\u003ch4\u003eUniversal Transition Coupling - UTC\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eThe problem solver\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProviding complete pipe connection flexibility, the UTC is the first choice for connecting dissimilar pipe materials including PE, PVC, ABS, copper, stainless steel, galvanised iron and lead.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFast and easy installation – Slide and Tighten technology\u003c\/li\u003e\n\u003cli\u003eComplete security – pre-assembled and no risk of damage to pipes when fitting\u003c\/li\u003e\n\u003cli\u003eHigh performance materials – manufactured from advanced thermoplastic engineered materials\u003c\/li\u003e\n\u003cli\u003eComplete coverage – connecting a wide variety of pipes together including PE, PVC, ABS, copper, stainless steel, galvanised iron and lead.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe UTC is a unique range of mechanical compression fittings that provide the ultimate in pipe connection flexibility.\u003c\/p\u003e\n\u003cp\u003eOur Slide and Tighten technology means no pipe preparation is needed, no force is required to push the pipe past the seal. This means faster installation because the fitting seals on the outside of the pipe.\u003c\/p\u003e\n\u003ch4\u003eFast and easy installation\u003c\/h4\u003e\n\u003cp\u003eSlide and Tighten the Philmac UTC incorporates all the benefits of Philmac’s Slide and Tighten technology. Simply witness mark the pipe against the flange on the fitting, and then insert the pipe to the correct depth. The nut can then be tightened using a wrench. The UTC is fully installed when the nut can no longer be tightened with reasonable force. No special tools are required and the Philmac UTC is supplied ready to use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy disassembly:\u003c\/strong\u003e The design of the UTC means that once the nut is backed off, the pipe can easily be removed from the fitting.\u003c\/p\u003e\n\u003ch4\u003eComplete security\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eVisual stop:\u003c\/strong\u003e The mechanical advantage of the nut thread compresses the seal into position, eliminating resistance when inserting the pipe into the fitting, so there is no risk of seal distortion or displacement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo loose components:\u003c\/strong\u003e The Philmac UTC is pre-assembled and ready to use, there are no loose components. There is no need for individual assembly of a grip ring, sealing ring or nut. All that is required is the insertion of the pipe and tightening of the nut.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDielectric (insulating) fitting:\u003c\/strong\u003e UTC fittings are insulating and are a dielectric fitting for use between dissimilar metals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnd load resistant:\u003c\/strong\u003e UTC fittings are fully end load resistant and do not require the use of thrust blocks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApprovals:\u003c\/strong\u003e Philmac UTC fittings are WRAS approved for potable water use.\u003c\/p\u003e\n\u003ch4\u003eHigh performance materials\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eManufactured from advanced thermoplastic engineered materials:\u003c\/strong\u003e The Philmac UTC is manufactured from lightweight high performance thermoplastic materials with outstanding impact, UV, chemical and corrosion resistance. The UTC end contains hard stainless steel grippers which provide superior end load resistance. The Philmac UTC is pressure rated to 12.5 Bar at 20°C to meet the needs of high pressure systems.\u003c\/p\u003e\n\u003ch4\u003eComplete coverage\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eWide range: The Philmac UTC range is comprehensive:\u003c\/strong\u003e Straight and reducing couplers, elbows and male adaptors, in both transition (PE to UTC) and double ended versions (UTC to UTC) ranging from 15mm to 61mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnects PE to a wide variety of pipes: \u003c\/strong\u003e PVC, copper, galvanised iron, ABS, lead, stainless steel, steel, polypropylene and PEX\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnects to a wide variety of pipes: \u003c\/strong\u003e PVC, copper, galvanised iron, ABS, lead, stainless steel, steel, polypropylene and PEX\u003c\/p\u003e\n\u003cp\u003e*Stock dependant\u003c\/p\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"34-39mm x 32mm","offer_id":53171742507275,"sku":"PHI00000930","price":24.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/PHI00000860.png?v=1751762538"},{"product_id":"philmac-universal-transition-coupler-39-43mm-x-32mm-1","title":"Philmac Universal Transition Coupler UTC x POL - 39-43mm x 32mm - 88106400","description":"\n\u003ch4\u003eUniversal Transition Coupling - UTC\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eThe problem solver\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProviding complete pipe connection flexibility, the UTC is the first choice for connecting dissimilar pipe materials including PE, PVC, ABS, copper, stainless steel, galvanised iron and lead.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFast and easy installation – Slide and Tighten technology\u003c\/li\u003e\n\u003cli\u003eComplete security – pre-assembled and no risk of damage to pipes when fitting\u003c\/li\u003e\n\u003cli\u003eHigh performance materials – manufactured from advanced thermoplastic engineered materials\u003c\/li\u003e\n\u003cli\u003eComplete coverage – connecting a wide variety of pipes together including PE, PVC, ABS, copper, stainless steel, galvanised iron and lead.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe UTC is a unique range of mechanical compression fittings that provide the ultimate in pipe connection flexibility.\u003c\/p\u003e\n\u003cp\u003eOur Slide and Tighten technology means no pipe preparation is needed, no force is required to push the pipe past the seal. This means faster installation because the fitting seals on the outside of the pipe.\u003c\/p\u003e\n\u003ch4\u003eFast and easy installation\u003c\/h4\u003e\n\u003cp\u003eSlide and Tighten the Philmac UTC incorporates all the benefits of Philmac’s Slide and Tighten technology. Simply witness mark the pipe against the flange on the fitting, and then insert the pipe to the correct depth. The nut can then be tightened using a wrench. The UTC is fully installed when the nut can no longer be tightened with reasonable force. No special tools are required and the Philmac UTC is supplied ready to use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy disassembly:\u003c\/strong\u003e The design of the UTC means that once the nut is backed off, the pipe can easily be removed from the fitting.\u003c\/p\u003e\n\u003ch4\u003eComplete security\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eVisual stop:\u003c\/strong\u003e The mechanical advantage of the nut thread compresses the seal into position, eliminating resistance when inserting the pipe into the fitting, so there is no risk of seal distortion or displacement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo loose components:\u003c\/strong\u003e The Philmac UTC is pre-assembled and ready to use, there are no loose components. There is no need for individual assembly of a grip ring, sealing ring or nut. All that is required is the insertion of the pipe and tightening of the nut.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDielectric (insulating) fitting:\u003c\/strong\u003e UTC fittings are insulating and are a dielectric fitting for use between dissimilar metals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnd load resistant:\u003c\/strong\u003e UTC fittings are fully end load resistant and do not require the use of thrust blocks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApprovals:\u003c\/strong\u003e Philmac UTC fittings are WRAS approved for potable water use.\u003c\/p\u003e\n\u003ch4\u003eHigh performance materials\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eManufactured from advanced thermoplastic engineered materials:\u003c\/strong\u003e The Philmac UTC is manufactured from lightweight high performance thermoplastic materials with outstanding impact, UV, chemical and corrosion resistance. The UTC end contains hard stainless steel grippers which provide superior end load resistance. The Philmac UTC is pressure rated to 12.5 Bar at 20°C to meet the needs of high pressure systems.\u003c\/p\u003e\n\u003ch4\u003eComplete coverage\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eWide range: The Philmac UTC range is comprehensive:\u003c\/strong\u003e Straight and reducing couplers, elbows and male adaptors, in both transition (PE to UTC) and double ended versions (UTC to UTC) ranging from 15mm to 61mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnects PE to a wide variety of pipes: \u003c\/strong\u003e PVC, copper, galvanised iron, ABS, lead, stainless steel, steel, polypropylene and PEX\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnects to a wide variety of pipes: \u003c\/strong\u003e PVC, copper, galvanised iron, ABS, lead, stainless steel, steel, polypropylene and PEX\u003c\/p\u003e\n\u003cp\u003e*Stock dependant\u003c\/p\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"39-43mm x 32mm","offer_id":53171742605579,"sku":"PHI00000940","price":27.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/PHI00000860.png?v=1751762538"},{"product_id":"philmac-universal-transition-coupler-47-49mm-x-50mm-1-2","title":"Philmac Universal Transition Coupler UTC x POL - 47-49mm x 50mm - 88108600","description":"\n\u003ch4\u003eUniversal Transition Coupling - UTC\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eThe problem solver\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProviding complete pipe connection flexibility, the UTC is the first choice for connecting dissimilar pipe materials including PE, PVC, ABS, copper, stainless steel, galvanised iron and lead.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFast and easy installation – Slide and Tighten technology\u003c\/li\u003e\n\u003cli\u003eComplete security – pre-assembled and no risk of damage to pipes when fitting\u003c\/li\u003e\n\u003cli\u003eHigh performance materials – manufactured from advanced thermoplastic engineered materials\u003c\/li\u003e\n\u003cli\u003eComplete coverage – connecting a wide variety of pipes together including PE, PVC, ABS, copper, stainless steel, galvanised iron and lead.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe UTC is a unique range of mechanical compression fittings that provide the ultimate in pipe connection flexibility.\u003c\/p\u003e\n\u003cp\u003eOur Slide and Tighten technology means no pipe preparation is needed, no force is required to push the pipe past the seal. This means faster installation because the fitting seals on the outside of the pipe.\u003c\/p\u003e\n\u003ch4\u003eFast and easy installation\u003c\/h4\u003e\n\u003cp\u003eSlide and Tighten the Philmac UTC incorporates all the benefits of Philmac’s Slide and Tighten technology. Simply witness mark the pipe against the flange on the fitting, and then insert the pipe to the correct depth. The nut can then be tightened using a wrench. The UTC is fully installed when the nut can no longer be tightened with reasonable force. No special tools are required and the Philmac UTC is supplied ready to use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy disassembly:\u003c\/strong\u003e The design of the UTC means that once the nut is backed off, the pipe can easily be removed from the fitting.\u003c\/p\u003e\n\u003ch4\u003eComplete security\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eVisual stop:\u003c\/strong\u003e The mechanical advantage of the nut thread compresses the seal into position, eliminating resistance when inserting the pipe into the fitting, so there is no risk of seal distortion or displacement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo loose components:\u003c\/strong\u003e The Philmac UTC is pre-assembled and ready to use, there are no loose components. There is no need for individual assembly of a grip ring, sealing ring or nut. All that is required is the insertion of the pipe and tightening of the nut.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDielectric (insulating) fitting:\u003c\/strong\u003e UTC fittings are insulating and are a dielectric fitting for use between dissimilar metals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnd load resistant:\u003c\/strong\u003e UTC fittings are fully end load resistant and do not require the use of thrust blocks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApprovals:\u003c\/strong\u003e Philmac UTC fittings are WRAS approved for potable water use.\u003c\/p\u003e\n\u003ch4\u003eHigh performance materials\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eManufactured from advanced thermoplastic engineered materials:\u003c\/strong\u003e The Philmac UTC is manufactured from lightweight high performance thermoplastic materials with outstanding impact, UV, chemical and corrosion resistance. The UTC end contains hard stainless steel grippers which provide superior end load resistance. The Philmac UTC is pressure rated to 12.5 Bar at 20°C to meet the needs of high pressure systems.\u003c\/p\u003e\n\u003ch4\u003eComplete coverage\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eWide range: The Philmac UTC range is comprehensive:\u003c\/strong\u003e Straight and reducing couplers, elbows and male adaptors, in both transition (PE to UTC) and double ended versions (UTC to UTC) ranging from 15mm to 61mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnects PE to a wide variety of pipes: \u003c\/strong\u003e PVC, copper, galvanised iron, ABS, lead, stainless steel, steel, polypropylene and PEX\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnects to a wide variety of pipes: \u003c\/strong\u003e PVC, copper, galvanised iron, ABS, lead, stainless steel, steel, polypropylene and PEX\u003c\/p\u003e\n\u003cp\u003e*Stock dependant\u003c\/p\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"47-49mm x 50mm","offer_id":53171742638347,"sku":"PHI00000950","price":31.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/PHI00000860.png?v=1751762538"},{"product_id":"philmac-utc-x-pol-joiner-47-49mm-x-63mm-2-88108700","title":"Philmac Universal Transition Coupler UTC x POL - 47-49mm x 63mm - 88108700","description":"\n\u003ch4\u003eUniversal Transition Coupling - UTC\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eThe problem solver\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProviding complete pipe connection flexibility, the UTC is the first choice for connecting dissimilar pipe materials including PE, PVC, ABS, copper, stainless steel, galvanised iron and lead.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFast and easy installation – Slide and Tighten technology\u003c\/li\u003e\n\u003cli\u003eComplete security – pre-assembled and no risk of damage to pipes when fitting\u003c\/li\u003e\n\u003cli\u003eHigh performance materials – manufactured from advanced thermoplastic engineered materials\u003c\/li\u003e\n\u003cli\u003eComplete coverage – connecting a wide variety of pipes together including PE, PVC, ABS, copper, stainless steel, galvanised iron and lead.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe UTC is a unique range of mechanical compression fittings that provide the ultimate in pipe connection flexibility.\u003c\/p\u003e\n\u003cp\u003eOur Slide and Tighten technology means no pipe preparation is needed, no force is required to push the pipe past the seal. This means faster installation because the fitting seals on the outside of the pipe.\u003c\/p\u003e\n\u003ch4\u003eFast and easy installation\u003c\/h4\u003e\n\u003cp\u003eSlide and Tighten the Philmac UTC incorporates all the benefits of Philmac’s Slide and Tighten technology. Simply witness mark the pipe against the flange on the fitting, and then insert the pipe to the correct depth. The nut can then be tightened using a wrench. The UTC is fully installed when the nut can no longer be tightened with reasonable force. No special tools are required and the Philmac UTC is supplied ready to use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy disassembly:\u003c\/strong\u003e The design of the UTC means that once the nut is backed off, the pipe can easily be removed from the fitting.\u003c\/p\u003e\n\u003ch4\u003eComplete security\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eVisual stop:\u003c\/strong\u003e The mechanical advantage of the nut thread compresses the seal into position, eliminating resistance when inserting the pipe into the fitting, so there is no risk of seal distortion or displacement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo loose components:\u003c\/strong\u003e The Philmac UTC is pre-assembled and ready to use, there are no loose components. There is no need for individual assembly of a grip ring, sealing ring or nut. All that is required is the insertion of the pipe and tightening of the nut.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDielectric (insulating) fitting:\u003c\/strong\u003e UTC fittings are insulating and are a dielectric fitting for use between dissimilar metals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnd load resistant:\u003c\/strong\u003e UTC fittings are fully end load resistant and do not require the use of thrust blocks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApprovals:\u003c\/strong\u003e Philmac UTC fittings are WRAS approved for potable water use.\u003c\/p\u003e\n\u003ch4\u003eHigh performance materials\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eManufactured from advanced thermoplastic engineered materials:\u003c\/strong\u003e The Philmac UTC is manufactured from lightweight high performance thermoplastic materials with outstanding impact, UV, chemical and corrosion resistance. The UTC end contains hard stainless steel grippers which provide superior end load resistance. The Philmac UTC is pressure rated to 12.5 Bar at 20°C to meet the needs of high pressure systems.\u003c\/p\u003e\n\u003ch4\u003eComplete coverage\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eWide range: The Philmac UTC range is comprehensive:\u003c\/strong\u003e Straight and reducing couplers, elbows and male adaptors, in both transition (PE to UTC) and double ended versions (UTC to UTC) ranging from 15mm to 61mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnects PE to a wide variety of pipes: \u003c\/strong\u003e PVC, copper, galvanised iron, ABS, lead, stainless steel, steel, polypropylene and PEX\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnects to a wide variety of pipes: \u003c\/strong\u003e PVC, copper, galvanised iron, ABS, lead, stainless steel, steel, polypropylene and PEX\u003c\/p\u003e\n\u003cp\u003e*Stock dependant\u003c\/p\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"47-49mm x 63mm","offer_id":53171744866571,"sku":"PHI00001400","price":35.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/PHI00000860.png?v=1751762538"}],"url":"https:\/\/plumblikeaking.co.uk\/collections\/philmac-utc-x-pe-joiners.oembed","provider":"Kings Plumbing Supplies Limited","version":"1.0","type":"link"}