{"title":"Grundfos Circulating Pumps","description":"","products":[{"product_id":"grundfos-ups4-go-25-65-130-93074168","title":"Grundfos UPS4 GO 25-65 130 - 93074168","description":"\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/93094223_0925_UPS4GO_ALPHA2GO_DB.pdf?v=1768845303\" target=\"_blank\" title=\"Grundfos UPS4 GO, ALPHA2 GO Databooklet\" rel=\"noopener\"\u003eGrundfos UPS4 GO, ALPHA2 GO Databooklet\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eUPS4 GO is a high-efficiency circulator pump fitted with an electronically commutated motor and designed for circulating liquids in heating and air conditioning systems.\u003c\/p\u003e\r\n\u003cp\u003eUPS4 GO is equipped with intelligent controls and offers three control modes: constant pressure, proportional pressure and constant curve. Each mode has three adjustable speed settings.\u003c\/p\u003e\r\n\u003cp\u003eReplacement of older integrated and stand-alone circulator pumps, including replicating curves, is made easy by using the Grundfos GO app and operating panel.\u003c\/p\u003e\r\n\u003cp\u003eThe toolless installer plug enables a fast and easy electrical connection.\r\n\u003c\/p\u003e\u003cp\u003eThe automatic self-venting ability and dry-running protection ensure quiet operation and reliability of the pump.\u003c\/p\u003e\r\n\u003cp\u003eThe product features robust startup which reduces the risk of blockages from dirt, magnetite and limescale build-up. In the unlikely case of a blocked pump, the motor continuously attempts to start at the highest possible torque, ensuring startup in tough conditions.\r\n\u003c\/p\u003e\u003cp\u003eThe ceramic shaft and bearings experience minimal wear, resulting in a longer lifespan and a reduced likelihood of noise in the system due to increased bearing clearance from wear.\u003c\/p\u003e\r\n\u003cp\u003eFault finding is fast and easy by using the error codes on the pump operating panel.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eControls:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eFrequency converter: Built-in\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\r\n\u003cli\u003eLiquid temperature range: -10 .. 110 °C\u003c\/li\u003e\r\n\u003cli\u003eSelected liquid temperature: 20 °C\u003c\/li\u003e\r\n\u003cli\u003eDensity: 998.2 kg\/m³\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eRated flow: 2.43 m³\/h\u003c\/li\u003e\r\n\u003cli\u003eRated head: 3.76 m\u003c\/li\u003e\r\n\u003cli\u003ePump head orientation: 9H\u003c\/li\u003e\r\n\u003cli\u003eApprovals: CE,VDE,UKCA\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePump housing: Cast iron\u003c\/li\u003e\r\n\u003cli\u003eEN 1561 EN-GJL-150\u003c\/li\u003e\r\n\u003cli\u003eASTM A48-150B\u003c\/li\u003e\r\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\r\n\u003cli\u003ePES+30% GF\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eRange of ambient temperature: 0 .. 55 °C\u003c\/li\u003e\r\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\r\n\u003cli\u003ePipe connection standard: ISO 228-1\u003c\/li\u003e\r\n\u003cli\u003eType of connection: G\u003c\/li\u003e\r\n\u003cli\u003eSize of connection: 1 1\/2 inch\u003c\/li\u003e\r\n\u003cli\u003ePressure rating for connection: PN 10\u003c\/li\u003e\r\n\u003cli\u003ePort-to-port length: 130 mm\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eP1 min: 4 W\u003c\/li\u003e\r\n\u003cli\u003eMax. P1: 60 W\u003c\/li\u003e\r\n\u003cli\u003eMains frequency: 50 \/ 60 Hz\u003c\/li\u003e\r\n\u003cli\u003eRated voltage: 1 x 220-240 V\u003c\/li\u003e\r\n\u003cli\u003eMinimum current consumption: 0.06 A\u003c\/li\u003e\r\n\u003cli\u003eMaximum current consumption: 0.6 A\u003c\/li\u003e\r\n\u003cli\u003eEnclosure class (IEC 34-5): IP44\u003c\/li\u003e\r\n\u003cli\u003eInsulation class (IEC 85): F\u003c\/li\u003e\r\n\u003cli\u003eThermal protection: Electronic\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eEnergy (EEI): 0.20\u003c\/li\u003e\r\n\u003cli\u003eNet weight: 1.86 kg\u003c\/li\u003e\r\n\u003cli\u003eGross weight: 2.04 kg\u003c\/li\u003e\r\n\u003cli\u003eShipping volume: 0.004 m³\u003c\/li\u003e\r\n\u003cli\u003eCountry of origin: RS\u003c\/li\u003e\r\n\u003cli\u003eCustom tariff no.: 84139100\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839326548235,"sku":"GRU00000170","price":101.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00000170.png?v=1769102673"},{"product_id":"grundfos-alpha2-go-25-75-130-93074268","title":"Grundfos ALPHA2 GO 25-75 130 - 93074268","description":"\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/93094223_0925_UPS4GO_ALPHA2GO_DB.pdf?v=1768845303\" target=\"_blank\" title=\"Grundfos UPS4 GO, ALPHA2 GO Databooklet\" rel=\"noopener\"\u003eGrundfos UPS4 GO, ALPHA2 GO Databooklet\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eALPHA2 GO is a high-efficiency circulator pump fitted with an electronically commutated motor and designed for circulating liquids in heating and air conditioning systems.\u003c\/p\u003e\r\n\u003cp\u003eThe Grundfos GO app offers a range of digital features that simplify the setup process for both new and replacement installations.\u003c\/p\u003e\r\n\u003cp\u003eBy using Grundfos GO, you can easily verify compatibility when replacing integrated and stand-alone circulator pumps, including replicating exact pump curves.\u003c\/p\u003e\r\n\u003cp\u003eALPHA2 GO is designed with intelligent controls modes: constant pressure, proportional pressure, constant flow and constant curve. Each mode has adjustable setpoints. The AUTOADAPT setting, available for constant and proportional pressure, removes the need to manually select the pump setpoint.\r\n\u003c\/p\u003e\u003cp\u003eThe PWM input allows for precise control of the speed, better enabling complete system optimization.\u003c\/p\u003e\r\n\u003cp\u003eThe toolless installer plug results in fast and easy electrical connection.\r\n\u003c\/p\u003e\u003cp\u003eThe automatic self-venting ability and dry-running protection ensure quiet operation and reliability of the pump.\u003c\/p\u003e\r\n\u003cp\u003eThe product features robust startup which reduces the risk of blockages from dirt, magnetite and limescale build-up. In the unlikely case of a blocked pump, the motor attempts to continuously start at the highest possible torque, ensuring startup in tough conditions.\u003c\/p\u003e\r\n\u003cp\u003eThe ceramic shaft and bearings experience minimal wear, resulting in a longer lifespan and a reduced likelihood of noise in the system due to increased bearing clearance from wear.\u003c\/p\u003e\r\n\u003cp\u003eWhen the system air detection and venting feature detects air in the system, the circulator pump pulsates to more effectively push air to the closest air removal device.\u003c\/p\u003e\r\n\u003cp\u003eGrundfos GO also provides the ability to conveniently fault-find the system through the event log and historical trend data for flow, head, estimated media temperature and on-cycle durations.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eControls:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eFrequency converter: Built-in\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\r\n\u003cli\u003eLiquid temperature range: -10 .. 110 °C\u003c\/li\u003e\r\n\u003cli\u003eSelected liquid temperature: 20 °C\u003c\/li\u003e\r\n\u003cli\u003eDensity: 998.2 kg\/m³\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eRated flow: 2.52 m³\/h\u003c\/li\u003e\r\n\u003cli\u003eRated head: 5.52 m\u003c\/li\u003e\r\n\u003cli\u003ePump head orientation: 9H\u003c\/li\u003e\r\n\u003cli\u003eApprovals: CE,VDE,UKCA\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePump housing: Cast iron\u003c\/li\u003e\r\n\u003cli\u003eEN 1561 EN-GJL-150\u003c\/li\u003e\r\n\u003cli\u003eASTM A48-150B\u003c\/li\u003e\r\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\r\n\u003cli\u003ePES 30% GF + PESU-GF20%\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eRange of ambient temperature: 0 .. 55 °C\u003c\/li\u003e\r\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\r\n\u003cli\u003ePipe connection standard: ISO 228-1\u003c\/li\u003e\r\n\u003cli\u003eType of connection: G\u003c\/li\u003e\r\n\u003cli\u003eSize of connection: 1 1\/2 inch\u003c\/li\u003e\r\n\u003cli\u003ePressure rating for connection: PN 10\u003c\/li\u003e\r\n\u003cli\u003ePort-to-port length: 130 mm\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eP1 min: 2 W\u003c\/li\u003e\r\n\u003cli\u003eMax. P1: 75 W\u003c\/li\u003e\r\n\u003cli\u003eMains frequency: 50 \/ 60 Hz\u003c\/li\u003e\r\n\u003cli\u003eRated voltage: 1 x 220-240 V\u003c\/li\u003e\r\n\u003cli\u003eMinimum current consumption: 0.04 A\u003c\/li\u003e\r\n\u003cli\u003eMaximum current consumption: 0.68 A\u003c\/li\u003e\r\n\u003cli\u003eEnclosure class (IEC 34-5): IP44\u003c\/li\u003e\r\n\u003cli\u003eInsulation class (IEC 85): F\u003c\/li\u003e\r\n\u003cli\u003eThermal protection: Electronic\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eEnergy (EEI): 0.19\u003c\/li\u003e\r\n\u003cli\u003eNet weight: 1.81 kg\u003c\/li\u003e\r\n\u003cli\u003eGross weight: 1.99 kg\u003c\/li\u003e\r\n\u003cli\u003eShipping volume: 0.004 m³\u003c\/li\u003e\r\n\u003cli\u003eCountry of origin: RS\u003c\/li\u003e\r\n\u003cli\u003eCustom tariff no.: 84139100\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839326581003,"sku":"GRU00000180","price":169.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00000180.png?v=1769102674"},{"product_id":"grundfos-alpha2-go-25-40-130-93074270","title":"Grundfos ALPHA2 GO 25-40 130 - 93074270","description":"\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/93094223_0925_UPS4GO_ALPHA2GO_DB.pdf?v=1768845303\" target=\"_blank\" title=\"Grundfos UPS4 GO, ALPHA2 GO Databooklet\" rel=\"noopener\"\u003eGrundfos UPS4 GO, ALPHA2 GO Databooklet\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eALPHA2 GO is a high-efficiency circulator pump fitted with an electronically commutated motor and designed for circulating liquids in heating and air conditioning systems.\u003c\/p\u003e\r\n\u003cp\u003eThe Grundfos GO app offers a range of digital features that simplify the setup process for both new and replacement installations.\u003c\/p\u003e\r\n\u003cp\u003eBy using Grundfos GO, you can easily verify compatibility when replacing integrated and stand-alone circulator pumps, including replicating exact pump curves.\u003c\/p\u003e\r\n\u003cp\u003eALPHA2 GO is designed with intelligent controls modes: constant pressure, proportional pressure, constant flow and constant curve. Each mode has adjustable setpoints. The AUTOADAPT setting, available for constant and proportional pressure, removes the need to manually select the pump setpoint.\r\n\u003c\/p\u003e\u003cp\u003eThe PWM input allows for precise control of the speed, better enabling complete system optimization.\u003c\/p\u003e\r\n\u003cp\u003eThe toolless installer plug results in fast and easy electrical connection.\r\n\u003c\/p\u003e\u003cp\u003eThe automatic self-venting ability and dry-running protection ensure quiet operation and reliability of the pump.\u003c\/p\u003e\r\n\u003cp\u003eThe product features robust startup which reduces the risk of blockages from dirt, magnetite and limescale build-up. In the unlikely case of a blocked pump, the motor attempts to continuously start at the highest possible torque, ensuring startup in tough conditions.\u003c\/p\u003e\r\n\u003cp\u003eThe ceramic shaft and bearings experience minimal wear, resulting in a longer lifespan and a reduced likelihood of noise in the system due to increased bearing clearance from wear.\u003c\/p\u003e\r\n\u003cp\u003eWhen the system air detection and venting feature detects air in the system, the circulator pump pulsates to more effectively push air to the closest air removal device.\u003c\/p\u003e\r\n\u003cp\u003eGrundfos GO also provides the ability to conveniently fault-find the system through the event log and historical trend data for flow, head, estimated media temperature and on-cycle durations.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eControls:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eFrequency converter: Built-in\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\r\n\u003cli\u003eLiquid temperature range: -10 .. 110 °C\u003c\/li\u003e\r\n\u003cli\u003eSelected liquid temperature: 20 °C\u003c\/li\u003e\r\n\u003cli\u003eDensity: 998.2 kg\/m³\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eRated flow: 1.53 m³\/h\u003c\/li\u003e\r\n\u003cli\u003eRated head: 2.06 m\u003c\/li\u003e\r\n\u003cli\u003ePump head orientation: 9H\u003c\/li\u003e\r\n\u003cli\u003eApprovals: CE,VDE,UKCA\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePump housing: Cast iron\u003c\/li\u003e\r\n\u003cli\u003eEN 1561 EN-GJL-150\u003c\/li\u003e\r\n\u003cli\u003eASTM A48-150B\u003c\/li\u003e\r\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\r\n\u003cli\u003ePES 30% GF + PESU-GF20%\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eRange of ambient temperature: 0 .. 55 °C\u003c\/li\u003e\r\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\r\n\u003cli\u003ePipe connection standard: ISO 228-1\u003c\/li\u003e\r\n\u003cli\u003eType of connection: G\u003c\/li\u003e\r\n\u003cli\u003eSize of connection: 1 1\/2 inch\u003c\/li\u003e\r\n\u003cli\u003ePressure rating for connection: PN 10\u003c\/li\u003e\r\n\u003cli\u003ePort-to-port length: 130 mm\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eP1 min: 3 W\u003c\/li\u003e\r\n\u003cli\u003eMax. P1: 21 W\u003c\/li\u003e\r\n\u003cli\u003eMains frequency: 50 \/ 60 Hz\u003c\/li\u003e\r\n\u003cli\u003eRated voltage: 1 x 220-240 V\u003c\/li\u003e\r\n\u003cli\u003eMinimum current consumption: 0.04 A\u003c\/li\u003e\r\n\u003cli\u003eMaximum current consumption: 0.26 A\u003c\/li\u003e\r\n\u003cli\u003eEnclosure class (IEC 34-5): IP44\u003c\/li\u003e\r\n\u003cli\u003eInsulation class (IEC 85): F\u003c\/li\u003e\r\n\u003cli\u003eThermal protection: Electronic\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eEnergy (EEI): 0.16\u003c\/li\u003e\r\n\u003cli\u003eNet weight: 1.74 kg\u003c\/li\u003e\r\n\u003cli\u003eGross weight: 1.92 kg\u003c\/li\u003e\r\n\u003cli\u003eShipping volume: 0.004 m³\u003c\/li\u003e\r\n\u003cli\u003eCountry of origin: RS\u003c\/li\u003e\r\n\u003cli\u003eCustom tariff no.: 84139100\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839326613771,"sku":"GRU00000190","price":303.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00000190.png?v=1769102673"},{"product_id":"grundfos-comfort-15-14-b-tdt-93093802","title":"Grundfos COMFORT 15-14 B TDT - 93093802","description":"\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/98553150_09.2024_COMFORT_DB.pdf?v=1768886260\" target=\"_blank\" title=\"Grundfos COMFORT Databooklet\" rel=\"noopener\"\u003eGrundfos COMFORT Databooklet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCOMFORT TDT is an efficient circulator designed for hot-water recirculation in residential buildings with a dedicated return line. It is compatible with all types of water heater tanks, tankless systems, solar or heat pumps whether or not the system has mixing or tampering valves installed.\u003c\/p\u003e\n\u003cp\u003eThe pump features a compact housing and a permanent magnet with an integrated control unit. The spherical rotor, equipped with an impeller, ensures optimal functionality supported by a robust single-bearing ball system. The drinking-water approved brass pump housing guarantees both safety and reliability. COMFORT TDT moreover features a built-in temperature sensor to maintain precise water temperature.\u003c\/p\u003e\n\u003cp\u003eThe user-friendly interface features LEDs and pushbuttons on the operating panel. This offers an intuitive way of displaying and setting operating times and control modes and ensures a comfortable and energy-efficient experience for residential use.\u003c\/p\u003e\n\u003cp\u003eThe timer control mode enables the pump to operate continuously based on set operating times with the smallest time increment being 30 minutes. In case of power failure, the timer pauses with no power reserve. However, the selected operating times and current time are retained. When power is restored, the pump resumes its last set operating state. If the power outage exceeds 15 minutes, the current time may need to be reset.\n\u003c\/p\u003e\u003cp\u003eThe timer and temperature control mode enables the pump to operate based on set operating times and the functionalities of temperature mode, with operating times taking priority. This means that the temperature mode is only active during the specified operating times. This control mode automatically activates the pump when the internal temperature sensor detects that the water temperature drops below a certain level. The control mode automatically adjusts the on and off temperatures based on the maximum temperature measured in the system. The maximum temperature of the system is measured every 12 hours for 15 minutes, enabling dynamic adjustment of the on and off temperatures.\u003c\/p\u003e\n\u003cp\u003eThe toolless installer plug results in fast and easy electrical connection.\n\u003c\/p\u003e\u003cp\u003eThe automatic self-venting ability and dry-running protection ensure quiet operation and reliability of the pump.\u003c\/p\u003e\n\u003cp\u003eThe product features robust startup which reduces the risk of blockages from dirt, magnetite and limescale build-up. In the unlikely case of a blocked pump, the motor attempts to continuously start at the highest possible torque, ensuring startup in tough conditions.\u003c\/p\u003e\n\u003cp\u003eThe ceramic shaft and bearings experience minimal wear, resulting in a longer lifespan and a reduced likelihood of noise in the system due to increased bearing clearance from wear.\u003c\/p\u003e\n\u003cp\u003eWhen the system air detection and venting feature detects air in the system, the circulator pump pulsates to more effectively push air to the closest air removal device.\u003c\/p\u003e\n\u003cp\u003eGrundfos GO also provides the ability to conveniently fault-find the system through the event log and historical trend data for flow, head, estimated media temperature and on-cycle durations.\u003c\/p\u003e\n\u003cp\u003eThe product features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eQ-H performance that is designed for single- and multi-family homes, depending on the required duty point to accommodate heat loss in a specific pipe layout.\u003c\/li\u003e\n\u003cli\u003eHeat loss reduced by 56 % compared to continuously running pump.\u003c\/li\u003e\n\u003cli\u003eLow power consumption and silent operation.\u003c\/li\u003e\n\u003cli\u003eCompliance with pipe manufacturers' flow velocity limits, including DN 15, DN 20 PEX, copper and others.\u003c\/li\u003e\n\u003cli\u003eDrinking-water approved thanks to the brass pump housing, stainless-steel rotor and composite impeller.\u003c\/li\u003e\n\u003cli\u003eA design that makes it easy to remove limescale and foreign deposits by removing the pump head, enabling the product to meet unlimited water hardness requirements.\u003c\/li\u003e\n\u003cli\u003eDry-running protection to prevent failure if the system runs out of water.\u003c\/li\u003e\n\u003cli\u003eMultiple installation positions, even with the pump head pointing downwards.\u003c\/li\u003e\n\u003cli\u003eA pump head designed to fit brass pump housings of old and new pumps of the same design, even from different pump manufacturers (such as Wilo, Vortex, Lowara, DAB and others).\u003c\/li\u003e\n\u003cli\u003eEasy electrical installation with a detachable COMFORT plug and a double insulation protection design, which eliminates the need for a ground wire.\u003c\/li\u003e\n\u003cli\u003eInsulating shell included for reduced heat loss.\u003c\/li\u003e\n\u003cli\u003eNon-return and shut-off valves included in X variant, reducing installation cost.\u003c\/li\u003e\n\u003cli\u003eAn optional venting flange, providing a simple way to vent or drain the system without the need for permanently installing an additional venting valve.\u003c\/li\u003e\n\u003cli\u003eOptional fittings for pipe connections of different sizes and types.\u003c\/li\u003e\n\u003cli\u003eOptional non return and shut-off valves are available.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eControls:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperation mode include: Timer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\n\u003cli\u003eLiquid temperature range: 2 .. 95 °C\u003c\/li\u003e\n\u003cli\u003eSelected liquid temperature: 60 °C\u003c\/li\u003e\n\u003cli\u003eDensity: 983.2 kg\/m³\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpeed no: 1\u003c\/li\u003e\n\u003cli\u003eRated flow: 0.45 m³\/h\u003c\/li\u003e\n\u003cli\u003eRated head: 0.9 m\u003c\/li\u003e\n\u003cli\u003eMaximum head: 14 dm\u003c\/li\u003e\n\u003cli\u003eTF class: 95\u003c\/li\u003e\n\u003cli\u003eApprovals: CE,WEEE,RCM,UKCA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump housing: Brass\u003c\/li\u003e\n\u003cli\u003eCuZn39Pb3, MS58\u003c\/li\u003e\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\n\u003cli\u003ePPO-GF20\/Stainless steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMinimum ambient temperature: 0 °C\u003c\/li\u003e\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\n\u003cli\u003ePipe connection standard: ISO 228-1\u003c\/li\u003e\n\u003cli\u003eType of connection: Rp\u003c\/li\u003e\n\u003cli\u003eSize of connection: 1\/2 inch\u003c\/li\u003e\n\u003cli\u003ePressure rating for connection: PN 10\u003c\/li\u003e\n\u003cli\u003ePort-to-port length: 80 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMax. power input: 7 W\u003c\/li\u003e\n\u003cli\u003eMains frequency: 50 \/ 60 Hz\u003c\/li\u003e\n\u003cli\u003eRated voltage: 1 x 230 V\u003c\/li\u003e\n\u003cli\u003eCurrent in speed 3: 0.07 A\u003c\/li\u003e\n\u003cli\u003eEnclosure class (IEC 34-5): IP44\u003c\/li\u003e\n\u003cli\u003eInsulation class (IEC 85): F\u003c\/li\u003e\n\u003cli\u003eEx-protection standard: ELECT.\u003c\/li\u003e\n\u003cli\u003eThermal protection: Impedance protected\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNet weight: .94 kg\u003c\/li\u003e\n\u003cli\u003eGross weight: 1.04 kg\u003c\/li\u003e\n\u003cli\u003eShipping volume: 0.003 m³\u003c\/li\u003e\n\u003cli\u003eCountry of origin: DE\u003c\/li\u003e\n\u003cli\u003eCustom tariff no.: 84137030\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839326646539,"sku":"GRU00000200","price":180.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00000200.png?v=1769102673"},{"product_id":"grundfos-comfort-15-14-b-t-93095535","title":"Grundfos COMFORT 15-14 B T - 93095535","description":"\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/98553150_09.2024_COMFORT_DB.pdf?v=1768886260\" target=\"_blank\" title=\"Grundfos COMFORT Databooklet\" rel=\"noopener\"\u003eGrundfos COMFORT Databooklet\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eCOMFORT T is an efficient circulator designed for hot-water recirculation in residential buildings with a dedicated return line. It is compatible with all types of water heater tanks, tankless systems, solar or heat pumps whether or not the system has mixing or tampering valves installed.\u003c\/p\u003e\r\n\u003cp\u003eThe pump features a compact housing and a permanent magnet with an integrated control unit. The spherical rotor, equipped with an impeller, ensures optimal functionality supported by a robust single-bearing ball system. The drinking-water approved brass pump housing guarantees both safety and reliability. COMFORT T moreover features a built-in temperature sensor to maintain water temperature.\u003c\/p\u003e\r\n\u003cp\u003eCOMFORT T features a temperature control mode that automatically activates the pump when the internal temperature sensor detects that the water temperature drops below a certain level. The control mode automatically adjusts the on and off temperatures based on the maximum temperature measured in the system. The maximum temperature of the system is measured every 12 hours for 15 minutes, enabling dynamic adjustment of the on and off temperatures.\u003c\/p\u003e\r\n\u003cp\u003eThe product features:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eQ-H performance that is designed for single- and multi-family homes, depending on the required duty point to accommodate heat loss in a specific pipe layout.\u003c\/li\u003e\r\n\u003cli\u003eHeat loss reduced by 25 % compared to continuously running pump.\u003c\/li\u003e\r\n\u003cli\u003eLow power consumption and silent operation.\u003c\/li\u003e\r\n\u003cli\u003eCompliance with pipe manufacturers' flow velocity limits, including DN 15, DN 20 PEX, copper and others.\u003c\/li\u003e\r\n\u003cli\u003eDrinking-water approved thanks to the brass pump housing, stainless-steel rotor and composite impeller.\u003c\/li\u003e\r\n\u003cli\u003eA design that makes it easy to remove limescale and foreign deposits by removing the pump head, enabling the product to meet unlimited water hardness requirements.\u003c\/li\u003e\r\n\u003cli\u003eDry-running protection to prevent failure if the system runs out of water.\u003c\/li\u003e\r\n\u003cli\u003eMultiple installation positions, even with the pump head pointing downwards.\u003c\/li\u003e\r\n\u003cli\u003eA pump head designed to fit brass pump housings of old and new pumps of the same design, even from different pump manufacturers (such as Wilo, Vortex, Lowara, DAB and others).\u003c\/li\u003e\r\n\u003cli\u003eEasy electrical installation with a detachable COMFORT plug and a double insulation protection design, which eliminates the need for a ground wire.\u003c\/li\u003e\r\n\u003cli\u003eInsulating shell included for reduced heat loss.\u003c\/li\u003e\r\n\u003cli\u003eNon-return and shut-off valves included in X variant, reducing installation cost.\u003c\/li\u003e\r\n\u003cli\u003eAn optional venting flange, providing a simple way to vent or drain the system without the need for permanently installing an additional venting valve.\u003c\/li\u003e\r\n\u003cli\u003eOptional fittings for pipe connections of different sizes and types.\u003c\/li\u003e\r\n\u003cli\u003eOptional non return and shut-off valves are available.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eControls:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eOperation mode include: Temperature\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\r\n\u003cli\u003eLiquid temperature range: 2 .. 95 °C\u003c\/li\u003e\r\n\u003cli\u003eSelected liquid temperature: 60 °C\u003c\/li\u003e\r\n\u003cli\u003eDensity: 983.2 kg\/m³\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSpeed no: 1\u003c\/li\u003e\r\n\u003cli\u003eRated flow: 0.45 m³\/h\u003c\/li\u003e\r\n\u003cli\u003eRated head: 0.9 m\u003c\/li\u003e\r\n\u003cli\u003eMaximum head: 14 dm\u003c\/li\u003e\r\n\u003cli\u003eTF class: 95\u003c\/li\u003e\r\n\u003cli\u003eApprovals: CE,WEEE,RCM,UKCA\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePump housing: Brass\u003c\/li\u003e\r\n\u003cli\u003eCuZn39Pb3, MS58\u003c\/li\u003e\r\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\r\n\u003cli\u003ePPO-GF20\/Stainless steel\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eMinimum ambient temperature: 0 °C\u003c\/li\u003e\r\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\r\n\u003cli\u003ePipe connection standard: ISO 228-1\u003c\/li\u003e\r\n\u003cli\u003eType of connection: Rp\u003c\/li\u003e\r\n\u003cli\u003eSize of connection: 1\/2 inch\u003c\/li\u003e\r\n\u003cli\u003ePressure rating for connection: PN 10\u003c\/li\u003e\r\n\u003cli\u003ePort-to-port length: 80 mm\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eMax. power input: 7 W\u003c\/li\u003e\r\n\u003cli\u003eMains frequency: 50 \/ 60 Hz\u003c\/li\u003e\r\n\u003cli\u003eRated voltage: 1 x 230 V\u003c\/li\u003e\r\n\u003cli\u003eCurrent in speed 3: 0.07 A\u003c\/li\u003e\r\n\u003cli\u003eEnclosure class (IEC 34-5): IP44\u003c\/li\u003e\r\n\u003cli\u003eInsulation class (IEC 85): F\u003c\/li\u003e\r\n\u003cli\u003eEx-protection standard: ELECT.\u003c\/li\u003e\r\n\u003cli\u003eThermal protection: Impedance protected\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eNet weight: .98 kg\u003c\/li\u003e\r\n\u003cli\u003eGross weight: 1.08 kg\u003c\/li\u003e\r\n\u003cli\u003eShipping volume: 0.003 m³\u003c\/li\u003e\r\n\u003cli\u003eCountry of origin: DE\u003c\/li\u003e\r\n\u003cli\u003eCustom tariff no.: 84137030\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839326941451,"sku":"GRU00000210","price":148.37,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00000210.png?v=1769102673"},{"product_id":"grundfos-ups-25-55-n-180-95906772","title":"Grundfos UPS 25-55 N 180 - 95906772","description":"\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/98808570_1215_Series_100_DB_GB.pdf?v=1768887734\" target=\"_blank\" title=\"Grundfos Series 100, UP, UPS, UPSD Databooklet\" rel=\"noopener\"\u003eGrundfos Series 100, UP, UPS, UPSD Databooklet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid. The pump has 3-step speed selector. The pump is characterized by:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCeramic shaft and radial bearings.\u003c\/li\u003e\n\u003cli\u003eCarbon axial bearing.\u003c\/li\u003e\n\u003cli\u003eStainless steel rotor can and bearing plate.\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant impeller, Composite.\u003c\/li\u003e\n\u003cli\u003eStainless steel pump housing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe motor is a 1-phase motor. No additional motor protection is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eControls:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTerminal box position: 9H\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\n\u003cli\u003eLiquid temperature range: -25 .. 110 °C\u003c\/li\u003e\n\u003cli\u003eSelected liquid temperature: 60 °C\u003c\/li\u003e\n\u003cli\u003eDensity: 983.2 kg\/m³\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRated flow: 3.37 m³\/h\u003c\/li\u003e\n\u003cli\u003eRated head: 2.989 m\u003c\/li\u003e\n\u003cli\u003eTF class: 110\u003c\/li\u003e\n\u003cli\u003eApprovals: CE,WEEE,UKCA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump housing: Stainless Steel\u003c\/li\u003e\n\u003cli\u003eEN 1.4308\u003c\/li\u003e\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\n\u003cli\u003ePES+30% GF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRange of ambient temperature: 0 .. 40 °C\u003c\/li\u003e\n\u003cli\u003eAmb. max at 80 dgr C liquid: 40 °C\u003c\/li\u003e\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\n\u003cli\u003ePipe connection standard: ISO 228-1\u003c\/li\u003e\n\u003cli\u003eType of connection: G\u003c\/li\u003e\n\u003cli\u003eSize of connection: 1 1\/2 inch\u003c\/li\u003e\n\u003cli\u003ePressure rating for connection: PN 10\u003c\/li\u003e\n\u003cli\u003ePort-to-port length: 180 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower input in speed 1: 65 W\u003c\/li\u003e\n\u003cli\u003ePower input in speed 2: 80 W\u003c\/li\u003e\n\u003cli\u003eMax. power input: 85 W\u003c\/li\u003e\n\u003cli\u003eMains frequency: 50 Hz\u003c\/li\u003e\n\u003cli\u003eRated voltage: 1 x 230 V\u003c\/li\u003e\n\u003cli\u003eCurrent in speed 1: 0.3 A\u003c\/li\u003e\n\u003cli\u003eCurrent in speed 2: 0.36 A\u003c\/li\u003e\n\u003cli\u003eCurrent in speed 3: 0.38 A\u003c\/li\u003e\n\u003cli\u003eCapacitor size - run: 2.5 µF\u003c\/li\u003e\n\u003cli\u003eEnclosure class (IEC 34-5): X2D\u003c\/li\u003e\n\u003cli\u003eInsulation class (IEC 85): F\u003c\/li\u003e\n\u003cli\u003eEx-protection standard: CONTACT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNet weight: 4.58 kg\u003c\/li\u003e\n\u003cli\u003eGross weight: 4.86 kg\u003c\/li\u003e\n\u003cli\u003eShipping volume: 0.008 m³\u003c\/li\u003e\n\u003cli\u003eCountry of origin: RS\u003c\/li\u003e\n\u003cli\u003eCustom tariff no.: 84137030\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839327006987,"sku":"GRU00000230","price":611.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00000230.png?v=1769102672"},{"product_id":"grundfos-ups-32-55-n-180-95906773","title":"Grundfos UPS 32-55 N 180 - 95906773","description":"\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/98808570_1215_Series_100_DB_GB.pdf?v=1768887734\" target=\"_blank\" title=\"Grundfos Series 100, UP, UPS, UPSD Databooklet\" rel=\"noopener\"\u003eGrundfos Series 100, UP, UPS, UPSD Databooklet\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid. The pump has 3-step speed selector. The pump is characterized by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eCeramic shaft and radial bearings.\u003c\/li\u003e\r\n\u003cli\u003eCarbon axial bearing.\u003c\/li\u003e\r\n\u003cli\u003eStainless steel rotor can and bearing plate.\u003c\/li\u003e\r\n\u003cli\u003eCorrosion-resistant impeller, Composite.\u003c\/li\u003e\r\n\u003cli\u003eStainless steel pump housing.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe motor is a 1-phase motor. No additional motor protection is required.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eControls:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eTerminal box position: 9H\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\r\n\u003cli\u003eLiquid temperature range: -25 .. 110 °C\u003c\/li\u003e\r\n\u003cli\u003eSelected liquid temperature: 60 °C\u003c\/li\u003e\r\n\u003cli\u003eDensity: 983.2 kg\/m³\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eRated flow: 4 m³\/h\u003c\/li\u003e\r\n\u003cli\u003eRated head: 3.313 m\u003c\/li\u003e\r\n\u003cli\u003eTF class: 110\u003c\/li\u003e\r\n\u003cli\u003eApprovals: CE,WEEE,UKCA\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePump housing: Stainless Steel\u003c\/li\u003e\r\n\u003cli\u003eEN 1.4308\u003c\/li\u003e\r\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\r\n\u003cli\u003ePES+30% GF\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eRange of ambient temperature: 0 .. 40 °C\u003c\/li\u003e\r\n\u003cli\u003eAmb. max at 80 dgr C liquid: 40 °C\u003c\/li\u003e\r\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\r\n\u003cli\u003ePipe connection standard: ISO 228-1\u003c\/li\u003e\r\n\u003cli\u003eType of connection: G\u003c\/li\u003e\r\n\u003cli\u003eSize of connection: 2 inch\u003c\/li\u003e\r\n\u003cli\u003ePressure rating for connection: PN 10\u003c\/li\u003e\r\n\u003cli\u003ePort-to-port length: 180 mm\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePower input in speed 1: 75 W\u003c\/li\u003e\r\n\u003cli\u003ePower input in speed 2: 100 W\u003c\/li\u003e\r\n\u003cli\u003eMax. power input: 105 W\u003c\/li\u003e\r\n\u003cli\u003eMains frequency: 50 Hz\u003c\/li\u003e\r\n\u003cli\u003eRated voltage: 1 x 230 V\u003c\/li\u003e\r\n\u003cli\u003eCurrent in speed 1: 0.32 A\u003c\/li\u003e\r\n\u003cli\u003eCurrent in speed 2: 0.44 A\u003c\/li\u003e\r\n\u003cli\u003eCurrent in speed 3: 0.46 A\u003c\/li\u003e\r\n\u003cli\u003eCapacitor size - run: 2.5 µF\u003c\/li\u003e\r\n\u003cli\u003eEnclosure class (IEC 34-5): X2D\u003c\/li\u003e\r\n\u003cli\u003eInsulation class (IEC 85): F\u003c\/li\u003e\r\n\u003cli\u003eEx-protection standard: CONTACT\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eNet weight: 4.75 kg\u003c\/li\u003e\r\n\u003cli\u003eGross weight: 5.04 kg\u003c\/li\u003e\r\n\u003cli\u003eShipping volume: 0.008 m³\u003c\/li\u003e\r\n\u003cli\u003eCountry of origin: RS\u003c\/li\u003e\r\n\u003cli\u003eCustom tariff no.: 84137030\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839327039755,"sku":"GRU00000240","price":818.91,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00000240.png?v=1769102674"},{"product_id":"grundfos-ups-15-50-n-130-97549426","title":"Grundfos UPS 15-50 N 130 - 97549426","description":"\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/98808570_1215_Series_100_DB_GB.pdf?v=1768887734\" target=\"_blank\" title=\"Grundfos Series 100, UP, UPS, UPSD Databooklet\" rel=\"noopener\"\u003eGrundfos Series 100, UP, UPS, UPSD Databooklet\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid. The pump has 3-step speed selector. The pump is characterized by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eCeramic shaft and radial bearings.\u003c\/li\u003e\r\n\u003cli\u003eCarbon axial bearing.\u003c\/li\u003e\r\n\u003cli\u003eStainless steel rotor can and bearing plate.\u003c\/li\u003e\r\n\u003cli\u003eCorrosion-resistant impeller, Composite.\u003c\/li\u003e\r\n\u003cli\u003eStainless steel pump housing.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe motor is a 1-phase motor. No additional motor protection is required.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eControls:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eTerminal box position: 9H\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\r\n\u003cli\u003eLiquid temperature range: 2 .. 110 °C\u003c\/li\u003e\r\n\u003cli\u003eSelected liquid temperature: 60 °C\u003c\/li\u003e\r\n\u003cli\u003eDensity: 983.2 kg\/m³\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eRated flow: 1.77 m³\/h\u003c\/li\u003e\r\n\u003cli\u003eRated head: 2.531 m\u003c\/li\u003e\r\n\u003cli\u003eTF class: 110\u003c\/li\u003e\r\n\u003cli\u003eApprovals: CE,WEEE,UKCA\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePump housing: Stainless steel\u003c\/li\u003e\r\n\u003cli\u003eEN 1.4308\u003c\/li\u003e\r\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\r\n\u003cli\u003ePES+30% GF\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eRange of ambient temperature: 0 .. 40 °C\u003c\/li\u003e\r\n\u003cli\u003eAmb. max at 80 dgr C liquid: 40 °C\u003c\/li\u003e\r\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\r\n\u003cli\u003ePipe connection standard: ISO 228-1\u003c\/li\u003e\r\n\u003cli\u003eType of connection: G\u003c\/li\u003e\r\n\u003cli\u003eSize of connection: 1 1\/2 inch\u003c\/li\u003e\r\n\u003cli\u003ePressure rating for connection: PN 10\u003c\/li\u003e\r\n\u003cli\u003ePort-to-port length: 130 mm\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePower input in speed 1: 35 W\u003c\/li\u003e\r\n\u003cli\u003ePower input in speed 2: 45 W\u003c\/li\u003e\r\n\u003cli\u003eMax. power input: 50 W\u003c\/li\u003e\r\n\u003cli\u003eMains frequency: 50 Hz\u003c\/li\u003e\r\n\u003cli\u003eRated voltage: 1 x 230 V\u003c\/li\u003e\r\n\u003cli\u003eCurrent in speed 1: 0.16 A\u003c\/li\u003e\r\n\u003cli\u003eCurrent in speed 2: 0.2 A\u003c\/li\u003e\r\n\u003cli\u003eCurrent in speed 3: 0.23 A\u003c\/li\u003e\r\n\u003cli\u003eCapacitor size - run: 2 µF\u003c\/li\u003e\r\n\u003cli\u003eEnclosure class (IEC 34-5): IP44\u003c\/li\u003e\r\n\u003cli\u003eInsulation class (IEC 85): F\u003c\/li\u003e\r\n\u003cli\u003eEx-protection standard: NONE\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eNet weight: 1.9 kg\u003c\/li\u003e\r\n\u003cli\u003eGross weight: 2.4 kg\u003c\/li\u003e\r\n\u003cli\u003eShipping volume: 0.003 m³\u003c\/li\u003e\r\n\u003cli\u003eCountry of origin: RS\u003c\/li\u003e\r\n\u003cli\u003eCustom tariff no.: 84137030\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839331692811,"sku":"GRU00001250","price":261.11,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00001250.png?v=1769102670"},{"product_id":"grundfos-magna3-25-60-97924245","title":"Grundfos MAGNA3 25-60 - 97924245","description":"\u003cp\u003e\u003ca href=\"https:\/\/api.grundfos.com\/literature\/revisions\/Grundfosliterature-6859283_20479279.pdf\" target=\"_blank\" title=\"Grundfos MAGNA3 Model E Databooklet\" rel=\"noopener\"\u003eGrundfos MAGNA3 Model E Databooklet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe Grundfos MAGNA3 circulator pump is the ideal choice for almost any building project – old or new. With its unrivalled energy efficiency, all-encompassing range and built-in communication capabilities, MAGNA3 is ideal for engineers and specifiers looking to create high-performance heating and cooling systems. The pump is maintenance-free due to the canned-rotor type design. This also means that pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid. MAGNA3 features an intuitive display and allows you to connect wirelessly with the Grundfos GO Remote app, giving you access to advanced reporting and monitoring. MAGNA3 model E has Bluetooth, which allows you to connect directly to the Grundfos GO app on your smart phone without any need for a dongle. The pump includes fieldbus communication via CIM modules as well as analogue and digital inputs and configurable relays. Control features include AUTOADAPT and FLOWADAPT. FLOWADAPT reduces the need for throttling valves, thus cutting costs on system components. MAGNA3 is the superior choice for a wide range of heating and cooling applications, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003emixing loops\u003c\/li\u003e\n\u003cli\u003eheating surfaces\u003c\/li\u003e\n\u003cli\u003eair conditioning surfaces\u003c\/li\u003e\n\u003cli\u003eground-source heat pump systems\u003c\/li\u003e\n\u003cli\u003esmall chiller applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMAGNA3 is a single-phase pump characterised by the controller and control display being integrated in the control box. The pump also has a built-in differential pressure and temperature sensor. The pump housing is available in both cast-iron and stainless-steel versions. The composite rotor can is carbon-fibre reinforced, the bearing plate and rotor cladding are made of stainless steel and the stator housing is made of aluminium. The power electronics are air-cooled. MAGNA3 incorporates a 4-pole synchronous, permanent-magnet motor (PM motor). This motor type is characterised by higher efficiency than a conventional asynchronous squirrel-cage motor. The pump speed is controlled by an integrated frequency converter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\n\u003cli\u003eLiquid temperature range: -10 .. 110 °C\u003c\/li\u003e\n\u003cli\u003eSelected liquid temperature: 60 °C\u003c\/li\u003e\n\u003cli\u003eDensity: 983.2 kg\/m³\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRated flow: 4.41 m³\/h\u003c\/li\u003e\n\u003cli\u003eRated head: 4.093 m\u003c\/li\u003e\n\u003cli\u003eMaximum head: 60 dm\u003c\/li\u003e\n\u003cli\u003eTF class: 110\u003c\/li\u003e\n\u003cli\u003eApprovals: CE,VDE,EAC,MOROCCO,UKCA,TSE,RCM,UkrSEPRO\u003c\/li\u003e\n\u003cli\u003eModel: E\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump housing: Cast iron\u003c\/li\u003e\n\u003cli\u003eEN 1561 EN-GJL-200\u003c\/li\u003e\n\u003cli\u003eASTM A48-200B\u003c\/li\u003e\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRange of ambient temperature: 0 .. 40 °C\u003c\/li\u003e\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\n\u003cli\u003eType of connection: G\u003c\/li\u003e\n\u003cli\u003eSize of connection: 1 1\/2 inch\u003c\/li\u003e\n\u003cli\u003ePressure rating for connection: PN 10\u003c\/li\u003e\n\u003cli\u003ePort-to-port length: 180mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum power input - P1: 84 W\u003c\/li\u003e\n\u003cli\u003eP1 min: 9 W\u003c\/li\u003e\n\u003cli\u003eMains frequency: 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eRated voltage: 1 x 230 V\u003c\/li\u003e\n\u003cli\u003eMinimum current consumption: 0.09 A\u003c\/li\u003e\n\u003cli\u003eMaximum current consumption: 0.75 A\u003c\/li\u003e\n\u003cli\u003eMaximum speed: 3510 rpm\u003c\/li\u003e\n\u003cli\u003eEnclosure class (IEC 34-5): X4D\u003c\/li\u003e\n\u003cli\u003eInsulation class (IEC 85): F\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnergy (EEI): 0.18\u003c\/li\u003e\n\u003cli\u003eNet weight: 5.11 kg\u003c\/li\u003e\n\u003cli\u003eGross weight: 5.84 kg\u003c\/li\u003e\n\u003cli\u003eShipping volume: 0.015 m³\u003c\/li\u003e\n\u003cli\u003eCountry of origin: DE\u003c\/li\u003e\n\u003cli\u003eCustom tariff no.: 84137030\u003c\/li\u003e\n\u003cli\u003eEnvironmental approvals: CN ROHS,WEEE\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839331922187,"sku":"GRU00001310","price":557.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00001310.png?v=1769102668"},{"product_id":"grundfos-magna3-25-80-97924246","title":"Grundfos MAGNA3 25-80 - 97924246","description":"\u003cp\u003e\u003ca href=\"https:\/\/api.grundfos.com\/literature\/revisions\/Grundfosliterature-6859283_20479279.pdf\" target=\"_blank\" title=\"Grundfos MAGNA3 Model E Databooklet\" rel=\"noopener\"\u003eGrundfos MAGNA3 Model E Databooklet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe Grundfos MAGNA3 circulator pump is the ideal choice for almost any building project – old or new. With its unrivalled energy efficiency, all-encompassing range and built-in communication capabilities, MAGNA3 is ideal for engineers and specifiers looking to create high-performance heating and cooling systems. The pump is maintenance-free due to the canned-rotor type design. This also means that pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid. MAGNA3 features an intuitive display and allows you to connect wirelessly with the Grundfos GO Remote app, giving you access to advanced reporting and monitoring. MAGNA3 model E has Bluetooth, which allows you to connect directly to the Grundfos GO app on your smart phone without any need for a dongle. The pump includes fieldbus communication via CIM modules as well as analogue and digital inputs and configurable relays. Control features include AUTOADAPT and FLOWADAPT. FLOWADAPT reduces the need for throttling valves, thus cutting costs on system components. MAGNA3 is the superior choice for a wide range of heating and cooling applications, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003emixing loops\u003c\/li\u003e\n\u003cli\u003eheating surfaces\u003c\/li\u003e\n\u003cli\u003eair conditioning surfaces\u003c\/li\u003e\n\u003cli\u003eground-source heat pump systems\u003c\/li\u003e\n\u003cli\u003esmall chiller applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMAGNA3 is a single-phase pump characterised by the controller and control display being integrated in the control box. The pump also has a built-in differential pressure and temperature sensor. The pump housing is available in both cast-iron and stainless-steel versions. The composite rotor can is carbon-fibre reinforced, the bearing plate and rotor cladding are made of stainless steel and the stator housing is made of aluminium. The power electronics are air-cooled. MAGNA3 incorporates a 4-pole synchronous, permanent-magnet motor (PM motor). This motor type is characterised by higher efficiency than a conventional asynchronous squirrel-cage motor. The pump speed is controlled by an integrated frequency converter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\n\u003cli\u003eLiquid temperature range: -10 .. 110 °C\u003c\/li\u003e\n\u003cli\u003eSelected liquid temperature: 60 °C\u003c\/li\u003e\n\u003cli\u003eDensity: 983.2 kg\/m³\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRated flow: 4.5 m³\/h\u003c\/li\u003e\n\u003cli\u003eRated head: 5.649 m\u003c\/li\u003e\n\u003cli\u003eMaximum head: 80 dm\u003c\/li\u003e\n\u003cli\u003eTF class: 110\u003c\/li\u003e\n\u003cli\u003eApprovals: CE,VDE,EAC,MOROCCO,UKCA,TSE,RCM,UkrSEPRO\u003c\/li\u003e\n\u003cli\u003eModel: E\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump housing: Cast iron\u003c\/li\u003e\n\u003cli\u003eEN 1561 EN-GJL-200\u003c\/li\u003e\n\u003cli\u003eASTM A48-200B\u003c\/li\u003e\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRange of ambient temperature: 0 .. 40 °C\u003c\/li\u003e\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\n\u003cli\u003eType of connection: G\u003c\/li\u003e\n\u003cli\u003eSize of connection: 1 1\/2 inch\u003c\/li\u003e\n\u003cli\u003ePressure rating for connection: PN 10\u003c\/li\u003e\n\u003cli\u003ePort-to-port length: 180mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum power input - P1: 116 W\u003c\/li\u003e\n\u003cli\u003eP1 min: 9 W \u003c\/li\u003e\n\u003cli\u003eMains frequency: 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eRated voltage: 1 x 230 V\u003c\/li\u003e\n\u003cli\u003eMinimum current consumption: 0.09 A\u003c\/li\u003e\n\u003cli\u003eMaximum current consumption: 1.02 A\u003c\/li\u003e\n\u003cli\u003eMaximum speed: 4050 rpm\u003c\/li\u003e\n\u003cli\u003eEnclosure class (IEC 34-5): X4D\u003c\/li\u003e\n\u003cli\u003eInsulation class (IEC 85): F\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnergy (EEI): 0.18\u003c\/li\u003e\n\u003cli\u003eNet weight: 5.11 kg\u003c\/li\u003e\n\u003cli\u003eGross weight: 5.84 kg\u003c\/li\u003e\n\u003cli\u003eShipping volume: 0.015 m³\u003c\/li\u003e\n\u003cli\u003eCountry of origin: DE\u003c\/li\u003e\n\u003cli\u003eCustom tariff no.: 84137030\u003c\/li\u003e\n\u003cli\u003eEnvironmental approvals: CN ROHS,WEEE\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839331954955,"sku":"GRU00001320","price":638.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00001320.png?v=1769102668"},{"product_id":"grundfos-magna3-25-100-97924247","title":"Grundfos MAGNA3 25-100 - 97924247","description":"\u003cp\u003e\u003ca href=\"https:\/\/api.grundfos.com\/literature\/revisions\/Grundfosliterature-6859283_20479279.pdf\" target=\"_blank\" title=\"Grundfos MAGNA3 Model E Databooklet\" rel=\"noopener\"\u003eGrundfos MAGNA3 Model E Databooklet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe Grundfos MAGNA3 circulator pump is the ideal choice for almost any building project – old or new. With its unrivalled energy efficiency, all-encompassing range and built-in communication capabilities, MAGNA3 is ideal for engineers and specifiers looking to create high-performance heating and cooling systems. The pump is maintenance-free due to the canned-rotor type design. This also means that pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid. MAGNA3 features an intuitive display and allows you to connect wirelessly with the Grundfos GO Remote app, giving you access to advanced reporting and monitoring. MAGNA3 model E has Bluetooth, which allows you to connect directly to the Grundfos GO app on your smart phone without any need for a dongle. The pump includes fieldbus communication via CIM modules as well as analogue and digital inputs and configurable relays. Control features include AUTOADAPT and FLOWADAPT. FLOWADAPT reduces the need for throttling valves, thus cutting costs on system components. MAGNA3 is the superior choice for a wide range of heating and cooling applications, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003emixing loops\u003c\/li\u003e\n\u003cli\u003eheating surfaces\u003c\/li\u003e\n\u003cli\u003eair conditioning surfaces\u003c\/li\u003e\n\u003cli\u003eground-source heat pump systems\u003c\/li\u003e\n\u003cli\u003esmall chiller applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMAGNA3 is a single-phase pump characterised by the controller and control display being integrated in the control box. The pump also has a built-in differential pressure and temperature sensor. The pump housing is available in both cast-iron and stainless-steel versions. The composite rotor can is carbon-fibre reinforced, the bearing plate and rotor cladding are made of stainless steel and the stator housing is made of aluminium. The power electronics are air-cooled. MAGNA3 incorporates a 4-pole synchronous, permanent-magnet motor (PM motor). This motor type is characterised by higher efficiency than a conventional asynchronous squirrel-cage motor. The pump speed is controlled by an integrated frequency converter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\n\u003cli\u003eLiquid temperature range: -10 .. 110 °C\u003c\/li\u003e\n\u003cli\u003eSelected liquid temperature: 60 °C\u003c\/li\u003e\n\u003cli\u003eDensity: 983.2 kg\/m³\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRated flow: 5.43 m³\/h\u003c\/li\u003e\n\u003cli\u003eRated head: 6.273 m\u003c\/li\u003e\n\u003cli\u003eMaximum head: 100 dm\u003c\/li\u003e\n\u003cli\u003eTF class: 110\u003c\/li\u003e\n\u003cli\u003eApprovals: CE,VDE,EAC,MOROCCO,UKCA,TSE,RCM,UkrSEPRO\u003c\/li\u003e\n\u003cli\u003eModel: E\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump housing: Cast iron\u003c\/li\u003e\n\u003cli\u003eEN 1561 EN-GJL-200\u003c\/li\u003e\n\u003cli\u003eASTM A48-200B\u003c\/li\u003e\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRange of ambient temperature: 0 .. 40 °C\u003c\/li\u003e\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\n\u003cli\u003eType of connection: G\u003c\/li\u003e\n\u003cli\u003eSize of connection: 1 1\/2 inch\u003c\/li\u003e\n\u003cli\u003ePressure rating for connection: PN 10\u003c\/li\u003e\n\u003cli\u003ePort-to-port length: 180mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum power input - P1: 153 W\u003c\/li\u003e\n\u003cli\u003eP1 min: 9 W\u003c\/li\u003e\n\u003cli\u003eMains frequency: 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eRated voltage: 1 x 230 V\u003c\/li\u003e\n\u003cli\u003eMinimum current consumption: 0.09 A\u003c\/li\u003e\n\u003cli\u003eMaximum current consumption: 1.33 A\u003c\/li\u003e\n\u003cli\u003eMaximum speed: 4530 rpm\u003c\/li\u003e\n\u003cli\u003eEnclosure class (IEC 34-5): X4D\u003c\/li\u003e\n\u003cli\u003eInsulation class (IEC 85): F\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnergy (EEI): 0.18\u003c\/li\u003e\n\u003cli\u003eNet weight: 5.11 kg\u003c\/li\u003e\n\u003cli\u003eGross weight: 5.84 kg\u003c\/li\u003e\n\u003cli\u003eShipping volume: 0.015 m³\u003c\/li\u003e\n\u003cli\u003eCountry of origin: DE\u003c\/li\u003e\n\u003cli\u003eCustom tariff no.: 84137030\u003c\/li\u003e\n\u003cli\u003eEnvironmental approvals: CN ROHS,WEEE\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839332086027,"sku":"GRU00001330","price":699.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00001330.png?v=1769102668"},{"product_id":"grundfos-magna3-32-100-97924257","title":"Grundfos MAGNA3 32-100 - 97924257","description":"\u003cp\u003e\u003ca href=\"https:\/\/api.grundfos.com\/literature\/revisions\/Grundfosliterature-6859283_20479279.pdf\" target=\"_blank\" title=\"Grundfos MAGNA3 Model E Databooklet\" rel=\"noopener\"\u003eGrundfos MAGNA3 Model E Databooklet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe Grundfos MAGNA3 circulator pump is the ideal choice for almost any building project – old or new. With its unrivalled energy efficiency, all-encompassing range and built-in communication capabilities, MAGNA3 is ideal for engineers and specifiers looking to create high-performance heating and cooling systems. The pump is maintenance-free due to the canned-rotor type design. This also means that pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid. MAGNA3 features an intuitive display and allows you to connect wirelessly with the Grundfos GO Remote app, giving you access to advanced reporting and monitoring. MAGNA3 model E has Bluetooth, which allows you to connect directly to the Grundfos GO app on your smart phone without any need for a dongle. The pump includes fieldbus communication via CIM modules as well as analogue and digital inputs and configurable relays. Control features include AUTOADAPT and FLOWADAPT. FLOWADAPT reduces the need for throttling valves, thus cutting costs on system components. MAGNA3 is the superior choice for a wide range of heating and cooling applications, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003emixing loops\u003c\/li\u003e\n\u003cli\u003eheating surfaces\u003c\/li\u003e\n\u003cli\u003eair conditioning surfaces\u003c\/li\u003e\n\u003cli\u003eground-source heat pump systems\u003c\/li\u003e\n\u003cli\u003esmall chiller applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMAGNA3 is a single-phase pump characterised by the controller and control display being integrated in the control box. The pump also has a built-in differential pressure and temperature sensor. The pump housing is available in both cast-iron and stainless-steel versions. The composite rotor can is carbon-fibre reinforced, the bearing plate and rotor cladding are made of stainless steel and the stator housing is made of aluminium. The power electronics are air-cooled. MAGNA3 incorporates a 4-pole synchronous, permanent-magnet motor (PM motor). This motor type is characterised by higher efficiency than a conventional asynchronous squirrel-cage motor. The pump speed is controlled by an integrated frequency converter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\n\u003cli\u003eLiquid temperature range: -10 .. 110 °C\u003c\/li\u003e\n\u003cli\u003eSelected liquid temperature: 60 °C\u003c\/li\u003e\n\u003cli\u003eDensity: 983.2 kg\/m³\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRated flow: 5.65 m³\/h\u003c\/li\u003e\n\u003cli\u003eRated head: 6.777 m\u003c\/li\u003e\n\u003cli\u003eMaximum head: 100 dm\u003c\/li\u003e\n\u003cli\u003eTF class: 110\u003c\/li\u003e\n\u003cli\u003eApprovals: CE,VDE,EAC,MOROCCO,UKCA,TSE,RCM,UkrSEPRO\u003c\/li\u003e\n\u003cli\u003eModel: E\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump housing: Cast iron\u003c\/li\u003e\n\u003cli\u003eEN 1561 EN-GJL-200\u003c\/li\u003e\n\u003cli\u003eASTM A48-200B\u003c\/li\u003e\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRange of ambient temperature: 0 .. 40 °C\u003c\/li\u003e\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\n\u003cli\u003eType of connection: G\u003c\/li\u003e\n\u003cli\u003eSize of connection: 2 inch\u003c\/li\u003e\n\u003cli\u003ePressure rating for connection: PN 10\u003c\/li\u003e\n\u003cli\u003ePort-to-port length: 180mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum power input - P1: 171 W\u003c\/li\u003e\n\u003cli\u003eP1 min: 9 W\u003c\/li\u003e\n\u003cli\u003eMains frequency: 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eRated voltage: 1 x 230 V\u003c\/li\u003e\n\u003cli\u003eMinimum current consumption: 0.09 A\u003c\/li\u003e\n\u003cli\u003eMaximum current consumption: 1.47 A\u003c\/li\u003e\n\u003cli\u003eMaximum speed: 4530 rpm\u003c\/li\u003e\n\u003cli\u003eEnclosure class (IEC 34-5): X4D\u003c\/li\u003e\n\u003cli\u003eInsulation class (IEC 85): F\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnergy (EEI): 0.18\u003c\/li\u003e\n\u003cli\u003eNet weight: 5.25 kg\u003c\/li\u003e\n\u003cli\u003eGross weight: 6 kg\u003c\/li\u003e\n\u003cli\u003eShipping volume: 0.014 m³\u003c\/li\u003e\n\u003cli\u003eCountry of origin: DE\u003c\/li\u003e\n\u003cli\u003eCustom tariff no.: 84137030\u003c\/li\u003e\n\u003cli\u003eEnvironmental approvals: CN ROHS,WEEE\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839332151563,"sku":"GRU00001340","price":767.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00001340.png?v=1769102669"},{"product_id":"grundfos-up-20-15-n-150-98057205","title":"Grundfos UP 20-15 N 150 - 98057205","description":"\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/98808570_1215_Series_100_DB_GB.pdf?v=1768887734\" target=\"_blank\" title=\"Grundfos Series 100, UP, UPS, UPSD Databooklet\" rel=\"noopener\"\u003eGrundfos Series 100, UP, UPS, UPSD Databooklet\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid. The pump is characterized by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eCeramic shaft and radial bearings.\u003c\/li\u003e\r\n\u003cli\u003eCarbon axial bearing.\u003c\/li\u003e\r\n\u003cli\u003eStainless steel rotor can and bearing plate.\u003c\/li\u003e\r\n\u003cli\u003eCorrosion-resistant impeller, Composite.\u003c\/li\u003e\r\n\u003cli\u003eStainless steel pump housing.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe motor is a 1-phase motor. No additional motor protection is required.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eControls:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eTerminal box position: 9H\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\r\n\u003cli\u003eLiquid temperature range: 2 .. 110 °C\u003c\/li\u003e\r\n\u003cli\u003eSelected liquid temperature: 60 °C\u003c\/li\u003e\r\n\u003cli\u003eDensity: 983.2 kg\/m³\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eRated flow: 1.1 m³\/h\u003c\/li\u003e\r\n\u003cli\u003eRated head: 0.646 m\u003c\/li\u003e\r\n\u003cli\u003eTF class: 95\u003c\/li\u003e\r\n\u003cli\u003eApprovals: CE,WEEE,UKCA\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePump housing: Stainless steel\u003c\/li\u003e\r\n\u003cli\u003eEN 1.4301\u003c\/li\u003e\r\n\u003cli\u003eAISI 304\u003c\/li\u003e\r\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\r\n\u003cli\u003ePES+30% GF\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eRange of ambient temperature: 0 .. 40 °C\u003c\/li\u003e\r\n\u003cli\u003eAmb. max at 80 dgr C liquid: 40 °C\u003c\/li\u003e\r\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\r\n\u003cli\u003ePipe connection standard: ISO 228-1\u003c\/li\u003e\r\n\u003cli\u003eType of connection: G\u003c\/li\u003e\r\n\u003cli\u003eSize of connection: 1 1\/4 inch\u003c\/li\u003e\r\n\u003cli\u003ePressure rating for connection: PN 10\u003c\/li\u003e\r\n\u003cli\u003ePort-to-port length: 150 mm\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eMax. power input: 65 W\u003c\/li\u003e\r\n\u003cli\u003eMains frequency: 50 Hz\u003c\/li\u003e\r\n\u003cli\u003eRated voltage: 1 x 230 V\u003c\/li\u003e\r\n\u003cli\u003eCurrent in speed 3: 0.28 A\u003c\/li\u003e\r\n\u003cli\u003eCapacitor size - run: 2 µF\u003c\/li\u003e\r\n\u003cli\u003eEnclosure class (IEC 34-5): IP24\u003c\/li\u003e\r\n\u003cli\u003eInsulation class (IEC 85): F\u003c\/li\u003e\r\n\u003cli\u003eEx-protection standard:: NONE\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eNet weight: 2 kg\u003c\/li\u003e\r\n\u003cli\u003eGross weight: 2.17 kg\u003c\/li\u003e\r\n\u003cli\u003eShipping volume: 0.004 m³\u003c\/li\u003e\r\n\u003cli\u003eCountry of origin: RS\u003c\/li\u003e\r\n\u003cli\u003eCustom tariff no.: 84137030\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839332315403,"sku":"GRU00001380","price":399.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00001380.png?v=1769102669"},{"product_id":"grundfos-up-20-30-n-150-98057221","title":"Grundfos UP 20-30 N 150 - 98057221","description":"\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/98808570_1215_Series_100_DB_GB.pdf?v=1768887734\" target=\"_blank\" title=\"Grundfos Series 100, UP, UPS, UPSD Databooklet\" rel=\"noopener\"\u003eGrundfos Series 100, UP, UPS, UPSD Databooklet\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid. The pump is characterized by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eCeramic shaft and radial bearings.\u003c\/li\u003e\r\n\u003cli\u003eCarbon axial bearing.\u003c\/li\u003e\r\n\u003cli\u003eStainless steel rotor can and bearing plate.\u003c\/li\u003e\r\n\u003cli\u003eCorrosion-resistant impeller, Composite.\u003c\/li\u003e\r\n\u003cli\u003eStainless steel pump housing.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe motor is a 1-phase motor. No additional motor protection is required.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eControls:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eTerminal box position: 9H\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\r\n\u003cli\u003eLiquid temperature range: 2 .. 110 °C\u003c\/li\u003e\r\n\u003cli\u003eSelected liquid temperature: 60 °C\u003c\/li\u003e\r\n\u003cli\u003eDensity: 983.2 kg\/m³\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eRated flow: 1.54 m³\/h\u003c\/li\u003e\r\n\u003cli\u003eRated head: 1.701 m\u003c\/li\u003e\r\n\u003cli\u003eTF class: 95\u003c\/li\u003e\r\n\u003cli\u003eApprovals: CE,WEEE,UKCA\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePump housing: Stainless steel\u003c\/li\u003e\r\n\u003cli\u003eEN 1.4301\u003c\/li\u003e\r\n\u003cli\u003eAISI 304\u003c\/li\u003e\r\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\r\n\u003cli\u003ePES+30% GF\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eRange of ambient temperature: 0 .. 40 °C\u003c\/li\u003e\r\n\u003cli\u003eAmb. max at 80 dgr C liquid: 40 °C\u003c\/li\u003e\r\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\r\n\u003cli\u003ePipe connection standard: ISO 228-1\u003c\/li\u003e\r\n\u003cli\u003eType of connection: G\u003c\/li\u003e\r\n\u003cli\u003eSize of connection: 1 1\/4 inch\u003c\/li\u003e\r\n\u003cli\u003ePressure rating for connection: PN 10\u003c\/li\u003e\r\n\u003cli\u003ePort-to-port length: 150 mm\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eMax. power input: 75 W\u003c\/li\u003e\r\n\u003cli\u003eMains frequency: 50 Hz\u003c\/li\u003e\r\n\u003cli\u003eRated voltage: 1 x 230 V\u003c\/li\u003e\r\n\u003cli\u003eCurrent in speed 3: 0.31 A\u003c\/li\u003e\r\n\u003cli\u003eCapacitor size - run: 2 µF\u003c\/li\u003e\r\n\u003cli\u003eEnclosure class (IEC 34-5): IP44\u003c\/li\u003e\r\n\u003cli\u003eInsulation class (IEC 85): F\u003c\/li\u003e\r\n\u003cli\u003eEx-protection standard:: NONE\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eNet weight: 2.04 kg\u003c\/li\u003e\r\n\u003cli\u003eGross weight: 2.17 kg\u003c\/li\u003e\r\n\u003cli\u003eShipping volume: 0.004 m³\u003c\/li\u003e\r\n\u003cli\u003eCountry of origin: RS\u003c\/li\u003e\r\n\u003cli\u003eCustom tariff no.: 84137030\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839332348171,"sku":"GRU00001390","price":412.52,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00001390.png?v=1769102667"},{"product_id":"grundfos-up-20-45-n-150-98057222","title":"Grundfos UP 20-45 N 150 - 98057222","description":"\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/98808570_1215_Series_100_DB_GB.pdf?v=1768887734\" target=\"_blank\" title=\"Grundfos Series 100, UP, UPS, UPSD Databooklet\" rel=\"noopener\"\u003eGrundfos Series 100, UP, UPS, UPSD Databooklet\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid. The pump is characterized by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eCeramic shaft and radial bearings.\u003c\/li\u003e\r\n\u003cli\u003eCarbon axial bearing.\u003c\/li\u003e\r\n\u003cli\u003eStainless steel rotor can and bearing plate.\u003c\/li\u003e\r\n\u003cli\u003eCorrosion-resistant impeller, Composite.\u003c\/li\u003e\r\n\u003cli\u003eStainless steel pump housing.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe motor is a 1-phase motor. No additional motor protection is required.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eControls:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eTerminal box position: 9H\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\r\n\u003cli\u003eLiquid temperature range: -25 .. 110 °C\u003c\/li\u003e\r\n\u003cli\u003eSelected liquid temperature: 60 °C\u003c\/li\u003e\r\n\u003cli\u003eDensity: 983.2 kg\/m³\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eRated flow: 2.28 m³\/h\u003c\/li\u003e\r\n\u003cli\u003eRated head: 2.922 m\u003c\/li\u003e\r\n\u003cli\u003eTF class: 95\u003c\/li\u003e\r\n\u003cli\u003eApprovals: CE,WEEE,UKCA\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePump housing: Stainless steel\u003c\/li\u003e\r\n\u003cli\u003eEN 1.4301\u003c\/li\u003e\r\n\u003cli\u003eAISI 304\u003c\/li\u003e\r\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\r\n\u003cli\u003ePES+30% GF\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eRange of ambient temperature: 0 .. 40 °C\u003c\/li\u003e\r\n\u003cli\u003eAmb. max at 80 dgr C liquid: 40 °C\u003c\/li\u003e\r\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\r\n\u003cli\u003ePipe connection standard: ISO 228-1\u003c\/li\u003e\r\n\u003cli\u003eType of connection: G\u003c\/li\u003e\r\n\u003cli\u003eSize of connection: 1 1\/4 inch\u003c\/li\u003e\r\n\u003cli\u003ePressure rating for connection: PN 10\u003c\/li\u003e\r\n\u003cli\u003ePort-to-port length: 150 mm\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eMax. power input: 120 W\u003c\/li\u003e\r\n\u003cli\u003eMains frequency: 50 Hz\u003c\/li\u003e\r\n\u003cli\u003eRated voltage: 1 x 230 V\u003c\/li\u003e\r\n\u003cli\u003eCurrent in speed 3: 0.52 A\u003c\/li\u003e\r\n\u003cli\u003eCapacitor size - run: 2.5 µF\u003c\/li\u003e\r\n\u003cli\u003eEnclosure class (IEC 34-5): X2D\u003c\/li\u003e\r\n\u003cli\u003eInsulation class (IEC 85): F\u003c\/li\u003e\r\n\u003cli\u003eEx-protection standard: CONTACT\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eNet weight: 3.54 kg\u003c\/li\u003e\r\n\u003cli\u003eGross weight: 3.82 kg\u003c\/li\u003e\r\n\u003cli\u003eShipping volume: 0.008 m³\u003c\/li\u003e\r\n\u003cli\u003eCountry of origin: RS\u003c\/li\u003e\r\n\u003cli\u003eCustom tariff no.: 84137030\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839332380939,"sku":"GRU00001400","price":435.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00001400.png?v=1769102668"},{"product_id":"grundfos-ups-25-80-n-180-98057227","title":"Grundfos UPS 25-80 N 180 - 98057227","description":"\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/98808570_1215_Series_100_DB_GB.pdf?v=1768887734\" target=\"_blank\" title=\"Grundfos Series 100, UP, UPS, UPSD Databooklet\" rel=\"noopener\"\u003eGrundfos Series 100, UP, UPS, UPSD Databooklet\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid. The pump has 3-step speed selector. The pump is characterized by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eCeramic shaft and radial bearings.\u003c\/li\u003e\r\n\u003cli\u003eCarbon axial bearing.\u003c\/li\u003e\r\n\u003cli\u003eStainless steel rotor can and bearing plate.\u003c\/li\u003e\r\n\u003cli\u003eCorrosion-resistant impeller, Composite.\u003c\/li\u003e\r\n\u003cli\u003eStainless steel pump housing.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe motor is a 1-phase motor. No additional motor protection is required.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eControls:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eTerminal box position: 9H\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\r\n\u003cli\u003eLiquid temperature range: -25 .. 110 °C\u003c\/li\u003e\r\n\u003cli\u003eSelected liquid temperature: 60 °C\u003c\/li\u003e\r\n\u003cli\u003eDensity: 983.2 kg\/m³\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eRated flow: 4.8 m³\/h\u003c\/li\u003e\r\n\u003cli\u003eRated head: 4.676 m\u003c\/li\u003e\r\n\u003cli\u003eTF class: 110\u003c\/li\u003e\r\n\u003cli\u003eApprovals: CE,WEEE,UKCA\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePump housing: Stainless steel\u003c\/li\u003e\r\n\u003cli\u003eEN 1.4301\u003c\/li\u003e\r\n\u003cli\u003eAISI 304\u003c\/li\u003e\r\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\r\n\u003cli\u003ePES+30% GF\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eRange of ambient temperature: 0 .. 40 °C\u003c\/li\u003e\r\n\u003cli\u003eAmb. max at 80 dgr C liquid: 40 °C\u003c\/li\u003e\r\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\r\n\u003cli\u003ePipe connection standard: ISO 228-1\u003c\/li\u003e\r\n\u003cli\u003eType of connection: G\u003c\/li\u003e\r\n\u003cli\u003eSize of connection: 1 1\/2 inch\u003c\/li\u003e\r\n\u003cli\u003ePressure rating for connection: PN 10\u003c\/li\u003e\r\n\u003cli\u003ePort-to-port length: 180 mm\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePower input in speed 1: 114 W\u003c\/li\u003e\r\n\u003cli\u003ePower input in speed 2: 159 W\u003c\/li\u003e\r\n\u003cli\u003eMax. power input: 160 W\u003c\/li\u003e\r\n\u003cli\u003eMains frequency: 50 Hz\u003c\/li\u003e\r\n\u003cli\u003eRated voltage: 1 x 230 V\u003c\/li\u003e\r\n\u003cli\u003eCurrent in speed 1: 0.5 A\u003c\/li\u003e\r\n\u003cli\u003eCurrent in speed 2: 0.7 A\u003c\/li\u003e\r\n\u003cli\u003eCurrent in speed 3: 0.7 A\u003c\/li\u003e\r\n\u003cli\u003eCapacitor size - run: 3.5 µF\u003c\/li\u003e\r\n\u003cli\u003eEnclosure class (IEC 34-5): X2D\u003c\/li\u003e\r\n\u003cli\u003eInsulation class (IEC 85): F\u003c\/li\u003e\r\n\u003cli\u003eEx-protection standard: CONTACT\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eNet weight: 4.59 kg\u003c\/li\u003e\r\n\u003cli\u003eGross weight: 4.87 kg\u003c\/li\u003e\r\n\u003cli\u003eShipping volume: 0.008 m³\u003c\/li\u003e\r\n\u003cli\u003eCountry of origin: RS\u003c\/li\u003e\r\n\u003cli\u003eCustom tariff no.: 84137030\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839332446475,"sku":"GRU00001410","price":723.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00001410.png?v=1769102669"},{"product_id":"grundfos-ups-40-50-fn-250-98057242","title":"Grundfos UPS 40-50 FN 250 - 98057242","description":"\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/98808570_1215_Series_100_DB_GB.pdf?v=1768887734\" target=\"_blank\" title=\"Grundfos Series 100, UP, UPS, UPSD Databooklet\" rel=\"noopener\"\u003eGrundfos Series 100, UP, UPS, UPSD Databooklet\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid. The pump has 3-step speed selector. The pump is characterized by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eCeramic shaft and radial bearings.\u003c\/li\u003e\r\n\u003cli\u003eCarbon axial bearing.\u003c\/li\u003e\r\n\u003cli\u003eStainless steel rotor can and bearing plate.\u003c\/li\u003e\r\n\u003cli\u003eCorrosion-resistant impeller, Composite.\u003c\/li\u003e\r\n\u003cli\u003eStainless steel pump housing.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe motor is a 1-phase motor. No additional motor protection is required.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eControls:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eTerminal box position: 9H\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\r\n\u003cli\u003eLiquid temperature range: -25 .. 110 °C\u003c\/li\u003e\r\n\u003cli\u003eSelected liquid temperature: 60 °C\u003c\/li\u003e\r\n\u003cli\u003eDensity: 983.2 kg\/m³\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eRated flow: 4 m³\/h\u003c\/li\u003e\r\n\u003cli\u003eRated head: 3.313 m\u003c\/li\u003e\r\n\u003cli\u003eTF class: 110\u003c\/li\u003e\r\n\u003cli\u003eApprovals: CE,WEEE,UKCA\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePump housing: Stainless steel\u003c\/li\u003e\r\n\u003cli\u003eEN 1.4301\u003c\/li\u003e\r\n\u003cli\u003eAISI 304\u003c\/li\u003e\r\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\r\n\u003cli\u003ePES+30% GF\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eRange of ambient temperature: 0 .. 40 °C\u003c\/li\u003e\r\n\u003cli\u003eAmb. max at 80 dgr C liquid: 40 °C\u003c\/li\u003e\r\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\r\n\u003cli\u003ePipe connection standard: EN 1092-2\u003c\/li\u003e\r\n\u003cli\u003eType of connection: DIN\u003c\/li\u003e\r\n\u003cli\u003eSize of connection: DN 40\u003c\/li\u003e\r\n\u003cli\u003ePressure rating for connection: PN 10\u003c\/li\u003e\r\n\u003cli\u003ePort-to-port length: 250 mm\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePower input in speed 1: 75 W\u003c\/li\u003e\r\n\u003cli\u003ePower input in speed 2: 100 W\u003c\/li\u003e\r\n\u003cli\u003eMax. power input: 105 W\u003c\/li\u003e\r\n\u003cli\u003eMains frequency: 50 Hz\u003c\/li\u003e\r\n\u003cli\u003eRated voltage: 1 x 230 V\u003c\/li\u003e\r\n\u003cli\u003eCurrent in speed 1: 0.32 A\u003c\/li\u003e\r\n\u003cli\u003eCurrent in speed 2: 0.44 A\u003c\/li\u003e\r\n\u003cli\u003eCurrent in speed 3: 0.46 A\u003c\/li\u003e\r\n\u003cli\u003eCapacitor size - run: 2.5 µF\u003c\/li\u003e\r\n\u003cli\u003eEnclosure class (IEC 34-5): X2D\u003c\/li\u003e\r\n\u003cli\u003eInsulation class (IEC 85): F\u003c\/li\u003e\r\n\u003cli\u003eEx-protection standard: CONTACT\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eNet weight: 8.3 kg\u003c\/li\u003e\r\n\u003cli\u003eGross weight: 8.64 kg\u003c\/li\u003e\r\n\u003cli\u003eShipping volume: 0.011 m³\u003c\/li\u003e\r\n\u003cli\u003eCountry of origin: RS\u003c\/li\u003e\r\n\u003cli\u003eCustom tariff no.: 84137030\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839332479243,"sku":"GRU00001420","price":1039.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00001420.png?v=1769102668"},{"product_id":"grundfos-ups-32-80-n-180-98057247","title":"Grundfos UPS 32-80 N 180 - 98057247","description":"\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/98808570_1215_Series_100_DB_GB.pdf?v=1768887734\" target=\"_blank\" title=\"Grundfos Series 100, UP, UPS, UPSD Databooklet\" rel=\"noopener\"\u003eGrundfos Series 100, UP, UPS, UPSD Databooklet\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid. The pump has 3-step speed selector. The pump is characterized by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eCeramic shaft and radial bearings.\u003c\/li\u003e\r\n\u003cli\u003eCarbon axial bearing.\u003c\/li\u003e\r\n\u003cli\u003eStainless steel rotor can and bearing plate.\u003c\/li\u003e\r\n\u003cli\u003eCorrosion-resistant impeller, Composite.\u003c\/li\u003e\r\n\u003cli\u003eStainless steel pump housing.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe motor is a 1-phase motor. No additional motor protection is required.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eControls:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eTerminal box position: 9H\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\r\n\u003cli\u003eLiquid temperature range: -25 .. 110 °C\u003c\/li\u003e\r\n\u003cli\u003eSelected liquid temperature: 60 °C\u003c\/li\u003e\r\n\u003cli\u003eDensity: 983.2 kg\/m³\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eRated flow: 5.13 m³\/h\u003c\/li\u003e\r\n\u003cli\u003eRated head: 5.19 m\u003c\/li\u003e\r\n\u003cli\u003eTF class: 110\u003c\/li\u003e\r\n\u003cli\u003eApprovals: CE,WEEE,UKCA\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePump housing: Stainless steel\u003c\/li\u003e\r\n\u003cli\u003eEN 1.4301\u003c\/li\u003e\r\n\u003cli\u003eAISI 304\u003c\/li\u003e\r\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\r\n\u003cli\u003ePES+30% GF\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eRange of ambient temperature: 0 .. 40 °C\u003c\/li\u003e\r\n\u003cli\u003eAmb. max at 80 dgr C liquid: 40 °C\u003c\/li\u003e\r\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\r\n\u003cli\u003ePipe connection standard: ISO 228-1\u003c\/li\u003e\r\n\u003cli\u003eType of connection: G\u003c\/li\u003e\r\n\u003cli\u003eSize of connection: 2 inch\u003c\/li\u003e\r\n\u003cli\u003ePressure rating for connection: PN 10\u003c\/li\u003e\r\n\u003cli\u003ePort-to-port length: 180 mm\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePower input in speed 1: 140 W\u003c\/li\u003e\r\n\u003cli\u003ePower input in speed 2: 213 W\u003c\/li\u003e\r\n\u003cli\u003eMax. power input: 230 W\u003c\/li\u003e\r\n\u003cli\u003eMains frequency: 50 Hz\u003c\/li\u003e\r\n\u003cli\u003eRated voltage: 1 x 230 V\u003c\/li\u003e\r\n\u003cli\u003eCurrent in speed 1: 0.66 A\u003c\/li\u003e\r\n\u003cli\u003eCurrent in speed 2: 0.97 A\u003c\/li\u003e\r\n\u003cli\u003eCurrent in speed 3: 1.01 A\u003c\/li\u003e\r\n\u003cli\u003eCapacitor size - run: 3.5 µF\u003c\/li\u003e\r\n\u003cli\u003eEnclosure class (IEC 34-5): X2D\u003c\/li\u003e\r\n\u003cli\u003eInsulation class (IEC 85): F\u003c\/li\u003e\r\n\u003cli\u003eEx-protection standard: CONTACT\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eNet weight: 4.8 kg\u003c\/li\u003e\r\n\u003cli\u003eGross weight: 5.08 kg\u003c\/li\u003e\r\n\u003cli\u003eShipping volume: 0.008 m³\u003c\/li\u003e\r\n\u003cli\u003eCountry of origin: RS\u003c\/li\u003e\r\n\u003cli\u003eCustom tariff no.: 84137030\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839332512011,"sku":"GRU00001430","price":951.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00001430.png?v=1769102667"},{"product_id":"grundfos-ups-32-100-n-180-98057249","title":"Grundfos UPS 32-100 N 180 - 98057249","description":"\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/98808570_1215_Series_100_DB_GB.pdf?v=1768887734\" target=\"_blank\" title=\"Grundfos Series 100, UP, UPS, UPSD Databooklet\" rel=\"noopener\"\u003eGrundfos Series 100, UP, UPS, UPSD Databooklet\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid. The pump has 3-step speed selector. The pump is characterized by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eCeramic shaft and radial bearings.\u003c\/li\u003e\r\n\u003cli\u003eCarbon axial bearing.\u003c\/li\u003e\r\n\u003cli\u003eStainless steel rotor can and bearing plate.\u003c\/li\u003e\r\n\u003cli\u003eCorrosion-resistant impeller, Composite.\u003c\/li\u003e\r\n\u003cli\u003eStainless steel pump housing.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe motor is a 1-phase motor. No additional motor protection is required.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eControls:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eTerminal box position: 9H\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\r\n\u003cli\u003eLiquid temperature range: -25 .. 110 °C\u003c\/li\u003e\r\n\u003cli\u003eSelected liquid temperature: 60 °C\u003c\/li\u003e\r\n\u003cli\u003eDensity: 983.2 kg\/m³\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eRated flow: 6.9 m³\/h\u003c\/li\u003e\r\n\u003cli\u003eRated head: 7.067 m\u003c\/li\u003e\r\n\u003cli\u003eTF class: 110\u003c\/li\u003e\r\n\u003cli\u003eApprovals: CE,WEEE,UKCA\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePump housing: Stainless steel\u003c\/li\u003e\r\n\u003cli\u003eEN 1.4308\u003c\/li\u003e\r\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\r\n\u003cli\u003ePES+30% GF\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eRange of ambient temperature: 0 .. 40 °C\u003c\/li\u003e\r\n\u003cli\u003eAmb. max at 80 dgr C liquid: 40 °C\u003c\/li\u003e\r\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\r\n\u003cli\u003ePipe connection standard: ISO 228-1\u003c\/li\u003e\r\n\u003cli\u003eType of connection: G\u003c\/li\u003e\r\n\u003cli\u003eSize of connection: 2 inch\u003c\/li\u003e\r\n\u003cli\u003ePressure rating for connection: PN 10\u003c\/li\u003e\r\n\u003cli\u003ePort-to-port length: 180 mm\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePower input in speed 1: 280 W\u003c\/li\u003e\r\n\u003cli\u003ePower input in speed 2: 340 W\u003c\/li\u003e\r\n\u003cli\u003eMax. power input: 345 W\u003c\/li\u003e\r\n\u003cli\u003eMains frequency: 50 Hz\u003c\/li\u003e\r\n\u003cli\u003eRated voltage: 1 x 230 V\u003c\/li\u003e\r\n\u003cli\u003eCurrent in speed 1: 1.3 A\u003c\/li\u003e\r\n\u003cli\u003eCurrent in speed 2: 1.5 A\u003c\/li\u003e\r\n\u003cli\u003eCurrent in speed 3: 1.52 A\u003c\/li\u003e\r\n\u003cli\u003eCapacitor size - run: 8 µF\u003c\/li\u003e\r\n\u003cli\u003eEnclosure class (IEC 34-5): X4D\u003c\/li\u003e\r\n\u003cli\u003eInsulation class (IEC 85): H\u003c\/li\u003e\r\n\u003cli\u003eEx-protection standard: CONTACT\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eNet weight: 6.65 kg\u003c\/li\u003e\r\n\u003cli\u003eGross weight: 7.45 kg\u003c\/li\u003e\r\n\u003cli\u003eShipping volume: 0.017 m³\u003c\/li\u003e\r\n\u003cli\u003eCountry of origin: DE\u003c\/li\u003e\r\n\u003cli\u003eCustom tariff no.: 84137030\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839332544779,"sku":"GRU00001440","price":1010.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00001440.png?v=1769104031"},{"product_id":"grundfos-ups2-25-80-180-98707848","title":"Grundfos UPS2 25-80 180 - 98707848","description":"\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/98505133_0817_UPS2_DB_GB_CD.pdf?v=1768946619\" target=\"_blank\" title=\"Grundfos UPS2 Circulator Pumps Databooklet\" rel=\"noopener\"\u003eGrundfos UPS2 Circulator Pumps Databooklet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eHigh-efficiency circulator pump with permanent-magnet motor (ECM technology) fit for the ErP directive no. 641\/2009 due to continuous variable-speed control for circulation of clean heating water according to VDI 2035.\u003c\/p\u003e\n\u003cp\u003eFeatures and benefits: UPS2 25-80 180\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ecomplies with the requirements of the ErP directive as from 2015\u003c\/li\u003e\n\u003cli\u003eone pump replaces three variants\u003c\/li\u003e\n\u003cli\u003eit is available as pump head without pump housing. Fits all 4-m, 5-m and 6-m pump housings of the Series 100\u003c\/li\u003e\n\u003cli\u003efor tight installations, in, for example, boiler applications\u003c\/li\u003e\n\u003cli\u003ehigh energy savings thanks to an energy efficiency index (EEI) lower than 0.23\u003c\/li\u003e\n\u003cli\u003ecomplies with the German regulation on energy saving in buildings and building systems – Energieeinsparverordnung – EnEV §14(3)\u003c\/li\u003e\n\u003cli\u003eone button for simple selection among three proportional-pressure curves or three fixed speeds\u003c\/li\u003e\n\u003cli\u003eno corrosion issues thanks to the electrocoated pump housing\u003c\/li\u003e\n\u003cli\u003ereduced installation costs as no external motor protection is required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eControls:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTerminal box position: 9H\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\n\u003cli\u003eLiquid temperature range: 2 .. 95 °C\u003c\/li\u003e\n\u003cli\u003eSelected liquid temperature: 60 °C\u003c\/li\u003e\n\u003cli\u003eDensity: 983.2 kg\/m³\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRated flow: 3.81 m³\/h\u003c\/li\u003e\n\u003cli\u003eRated head: 6.84 m\u003c\/li\u003e\n\u003cli\u003eTF class: 95\u003c\/li\u003e\n\u003cli\u003eApprovals: CE,WEEE,UKCA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump housing: Cast iron\u003c\/li\u003e\n\u003cli\u003eEN 1561 EN-GJL-150\u003c\/li\u003e\n\u003cli\u003eASTM A48-25B\u003c\/li\u003e\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\n\u003cli\u003ePES 30% GF + PESU-GF20%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRange of ambient temperature: 0 .. 40 °C\u003c\/li\u003e\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\n\u003cli\u003ePipe connection standard: EN 1092-2\u003c\/li\u003e\n\u003cli\u003eType of connection: G\u003c\/li\u003e\n\u003cli\u003eSize of inlet connection: 1 1\/2 inch\u003c\/li\u003e\n\u003cli\u003ePressure rating for connection: PN 10\u003c\/li\u003e\n\u003cli\u003ePort-to-port length: 180 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower input P1: 140 W\u003c\/li\u003e\n\u003cli\u003eMains frequency: 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eRated voltage: 1 x 230 V\u003c\/li\u003e\n\u003cli\u003eMaximum current consumption: 1.1 A\u003c\/li\u003e\n\u003cli\u003eMinimum current consumption: 0.1 A\u003c\/li\u003e\n\u003cli\u003eEnclosure class (IEC 34-5): X2D\u003c\/li\u003e\n\u003cli\u003eInsulation class (IEC 85): F\u003c\/li\u003e\n\u003cli\u003eEx-protection standard: NONE\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839332708619,"sku":"GRU00001490","price":264.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00001490.png?v=1769102666"},{"product_id":"grundfos-ups2-32-80-180-98707851","title":"Grundfos UPS2 32-80 180 - 98707851","description":"\u003cp\u003e\u003ca href=\"\" https: target=\"\" _blank title=\"\" grundfos ups2 circulator pumps databooklet rel=\"\" noopener\u003eGrundfos UPS2 Circulator Pumps Databooklet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eHigh-efficiency circulator pump with permanent-magnet motor (ECM technology) fit for the ErP directive no. 641\/2009 due to continuous variable-speed control for circulation of clean heating water according to VDI 2035.\u003c\/p\u003e\n\u003cp\u003eFeatures and benefits: UPS2 25-80 180\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ecomplies with the requirements of the ErP directive as from 2015\u003c\/li\u003e\n\u003cli\u003eone pump replaces three variants\u003c\/li\u003e\n\u003cli\u003eit is available as pump head without pump housing. Fits all 4-m, 5-m and 6-m pump housings of the Series 100\u003c\/li\u003e\n\u003cli\u003efor tight installations, in, for example, boiler applications\u003c\/li\u003e\n\u003cli\u003ehigh energy savings thanks to an energy efficiency index (EEI) lower than 0.23\u003c\/li\u003e\n\u003cli\u003ecomplies with the German regulation on energy saving in buildings and building systems – Energieeinsparverordnung – EnEV §14(3)\u003c\/li\u003e\n\u003cli\u003eone button for simple selection among three proportional-pressure curves or three fixed speeds\u003c\/li\u003e\n\u003cli\u003eno corrosion issues thanks to the electrocoated pump housing\u003c\/li\u003e\n\u003cli\u003ereduced installation costs as no external motor protection is required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eControls:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTerminal box position: 9H\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\n\u003cli\u003eLiquid temperature range: 2 .. 95 °C\u003c\/li\u003e\n\u003cli\u003eSelected liquid temperature: 60 °C\u003c\/li\u003e\n\u003cli\u003eDensity: 983.2 kg\/m³\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRated flow: 3.81 m³\/h\u003c\/li\u003e\n\u003cli\u003eRated head: 6.84 m\u003c\/li\u003e\n\u003cli\u003eTF class: 95\u003c\/li\u003e\n\u003cli\u003eApprovals: CE,WEEE,UKCA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump housing: Cast iron\u003c\/li\u003e\n\u003cli\u003eEN 1561 EN-GJL-150\u003c\/li\u003e\n\u003cli\u003eASTM A48-25B\u003c\/li\u003e\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\n\u003cli\u003ePES 30% GF + PESU-GF20%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRange of ambient temperature: 0 .. 40 °C\u003c\/li\u003e\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\n\u003cli\u003ePipe connection standard: EN 1092-2\u003c\/li\u003e\n\u003cli\u003eType of connection: G\u003c\/li\u003e\n\u003cli\u003eSize of inlet connection: 2 inch\u003c\/li\u003e\n\u003cli\u003ePressure rating for connection: PN 10\u003c\/li\u003e\n\u003cli\u003ePort-to-port length: 180 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower input P1: 140 W\u003c\/li\u003e\n\u003cli\u003eMains frequency: 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eRated voltage: 1 x 230 V\u003c\/li\u003e\n\u003cli\u003eMaximum current consumption: 1.1 A\u003c\/li\u003e\n\u003cli\u003eMinimum current consumption: 0.1 A\u003c\/li\u003e\n\u003cli\u003eEnclosure class (IEC 34-5): X2D\u003c\/li\u003e\n\u003cli\u003eInsulation class (IEC 85): F\u003c\/li\u003e\n\u003cli\u003eEx-protection standard: NONE\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839332741387,"sku":"GRU00001500","price":306.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00001500.png?v=1769102666"},{"product_id":"grundfos-comfort-15-14-b-99164484","title":"Grundfos COMFORT 15-14 B - 99164484","description":"\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/98553150_09.2024_COMFORT_DB.pdf?v=1768886260\" target=\"_blank\" title=\"Grundfos COMFORT Databooklet\" rel=\"noopener\"\u003eGrundfos COMFORT Databooklet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCOMFORT is an efficient circulator designed for hot-water recirculation in residential buildings with a dedicated return line. It is compatible with all types of water heater tanks, tankless systems, solar or heat pumps whether or not the system has mixing or tampering valves installed.\u003c\/p\u003e\n\u003cp\u003eThe pump features a compact housing and a permanent magnet with an integrated control unit. The spherical rotor, equipped with an impeller, ensures optimal functionality supported by a robust single-bearing ball system. The drinking-water approved brass pump housing guarantees both safety and reliability.\u003c\/p\u003e\n\u003cp\u003eCOMFORT features the continuous operation 24\/7 mode which is suitable for external control via plug-in timer, gas boiler or heat-pump controller.\u003c\/p\u003e\n\u003cp\u003eThe product features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eQ-H performance that is designed for single- and multi-family homes, depending on the required duty point to accommodate heat loss in a specific pipe layout.\u003c\/li\u003e\n\u003cli\u003eLow power consumption and silent operation.\u003c\/li\u003e\n\u003cli\u003eCompliance with pipe manufacturers' flow velocity limits, including DN 15, DN 20 PEX, copper and others.\u003c\/li\u003e\n\u003cli\u003eDrinking-water approved thanks to the brass pump housing, stainless-steel rotor and composite impeller.\u003c\/li\u003e\n\u003cli\u003eA design that makes it easy to remove limescale and foreign deposits by removing the pump head, enabling the product to meet unlimited water hardness requirements.\u003c\/li\u003e\n\u003cli\u003eDry-running protection to prevent failure if the system runs out of water.\u003c\/li\u003e\n\u003cli\u003eMultiple installation positions, even with the pump head pointing downwards.\u003c\/li\u003e\n\u003cli\u003eA pump head designed to fit brass pump housings of old and new pumps of the same design, even from different pump manufacturers (such as Wilo, Vortex, Lowara, DAB and others).\u003c\/li\u003e\n\u003cli\u003eEasy electrical installation with a detachable COMFORT plug and a double insulation protection design, which eliminates the need for a ground wire.\u003c\/li\u003e\n\u003cli\u003eInsulating shell included for reduced heat loss.\u003c\/li\u003e\n\u003cli\u003eNon-return and shut-off valves included in X variant, reducing installation cost.\u003c\/li\u003e\n\u003cli\u003eAn optional venting flange, providing a simple way to vent or drain the system without the need for permanently installing an additional venting valve.\u003c\/li\u003e\n\u003cli\u003eOptional fittings for pipe connections of different sizes and types.\u003c\/li\u003e\n\u003cli\u003eOptional non return and shut-off valves are available.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eControls:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperation mode include: None\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\n\u003cli\u003eLiquid temperature range: 2 .. 95 °C\u003c\/li\u003e\n\u003cli\u003eSelected liquid temperature: 60 °C\u003c\/li\u003e\n\u003cli\u003eDensity: 983.2 kg\/m³\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpeed no: 1\u003c\/li\u003e\n\u003cli\u003eRated flow: 0.45 m³\/h\u003c\/li\u003e\n\u003cli\u003eRated head: 0.9 m\u003c\/li\u003e\n\u003cli\u003eMaximum head: 14 dm\u003c\/li\u003e\n\u003cli\u003eTF class: 95\u003c\/li\u003e\n\u003cli\u003eApprovals: CE,WEEE,RCM,UKCA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump housing: Brass\u003c\/li\u003e\n\u003cli\u003eCuZn39Pb3, MS58\u003c\/li\u003e\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\n\u003cli\u003ePPO-GF20\/Stainless steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMinimum ambient temperature: 0 °C\u003c\/li\u003e\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\n\u003cli\u003ePipe connection standard: ISO 228-1\u003c\/li\u003e\n\u003cli\u003eType of connection: Rp\u003c\/li\u003e\n\u003cli\u003eSize of connection: 1\/2 inch\u003c\/li\u003e\n\u003cli\u003ePressure rating for connection: PN 10\u003c\/li\u003e\n\u003cli\u003ePort-to-port length: 80 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMax. power input: 7 W\u003c\/li\u003e\n\u003cli\u003eMains frequency: 50 \/ 60 Hz\u003c\/li\u003e\n\u003cli\u003eRated voltage: 1 x 230 V\u003c\/li\u003e\n\u003cli\u003eCurrent in speed 3: 0.07 A\u003c\/li\u003e\n\u003cli\u003eEnclosure class (IEC 34-5): IP44\u003c\/li\u003e\n\u003cli\u003eInsulation class (IEC 85): F\u003c\/li\u003e\n\u003cli\u003eEx-protection standard: ELECT.\u003c\/li\u003e\n\u003cli\u003eThermal protection: Impedance protected\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNet weight: 0.86 kg\u003c\/li\u003e\n\u003cli\u003eGross weight: 0.96 kg\u003c\/li\u003e\n\u003cli\u003eShipping volume: 0.003 m³\u003c\/li\u003e\n\u003cli\u003eCountry of origin: DE\u003c\/li\u003e\n\u003cli\u003eCustom tariff no.: 84137030\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839332970763,"sku":"GRU00001570","price":212.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00001570.png?v=1769102666"},{"product_id":"grundfos-comfort-15-14-b-ta-99164487","title":"Grundfos COMFORT 15-14 B TA - 99164487","description":"\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/98553150_09.2024_COMFORT_DB.pdf?v=1768886260\" target=\"_blank\" title=\"Grundfos COMFORT Databooklet\" rel=\"noopener\"\u003eGrundfos COMFORT Databooklet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCOMFORT TA is an efficient circulator designed for hot-water recirculation in residential buildings with a dedicated return line. It is compatible with all types of water heater tanks, tankless systems, solar or heat pumps whether or not the system has mixing or tampering valves installed.\u003c\/p\u003e\n\u003cp\u003eThe pump features a compact housing and a permanent magnet with an integrated control unit. The spherical rotor, equipped with an impeller, ensures optimal functionality supported by a robust single-bearing ball system. The drinking-water approved brass pump housing guarantees both safety and reliability. COMFORT TA moreover features a built-in temperature sensor to maintain water temperature.\u003c\/p\u003e\n\u003cp\u003eThe user-friendly interface features LEDs and pushbuttons on the operating panel. This offers an intuitive way of displaying and setting operating times and control modes and ensures a comfortable and energy-efficient experience for residential use.\u003c\/p\u003e\n\u003cp\u003eCOMFORT TA features three control modes: AUTOADAPT, temperature and continuous 24\/7.\u003c\/p\u003e\n\u003cp\u003eWith the AUTOADAPT control mode, the pump quickly learns usage patterns throughout the day and ensures hot water is available only when needed via an external sensor on the supply pipe. The pump can therefore differentiate between mornings, evenings, weekdays, weekends and periods of inactivity such as vacations, saving energy and water by allowing the pump only to operate when required. After 24 hours of detecting no hot water usage, the pump automatically enters vacation mode. It resumes operation when there is a demand for hot water again. For the first two weeks after installation, the pump temperature control causes frequent starts to ensure immediate comfort until the usage pattern has been learned. Regardless of usage pattern, the pump provides instant comfort when it detects a demand for hot water. Once a week, the pump runs a 15-minute disinfection (anti-legionella) cycle. The water heater must enable that function once a week.\u003c\/p\u003e\n\u003cp\u003eThe temperature control mode incorporates both the external and internal sensors for more accurate water temperature measurement and activates the pump when the water temperature drops below a certain level. The on and off temperatures are automatically adjusted based on the maximum temperature measured in the system. The maximum temperature of the system is measured constantly, allowing dynamic adjustment of the on and off temperatures. This mode also includes automatic vacation mode for enhanced energy efficiency, which makes it ideal for vacation homes.\u003c\/p\u003e\n\u003cp\u003eContinuous 24\/7 control mode The pump operates continuously 24 hours a day.\u003c\/p\u003e\n\u003cp\u003eThe product features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eQ-H performance that is designed for single- and multi-family homes, depending on the required duty point to accommodate heat loss in a specific pipe layout.\u003c\/li\u003e\n\u003cli\u003eHeat loss reduction by 67 % compared to continuously running pump.\u003c\/li\u003e\n\u003cli\u003eLow power consumption and silent operation.\u003c\/li\u003e\n\u003cli\u003eCompliance with pipe manufacturers' flow velocity limits, including DN 15, DN 20 PEX, copper and others.\u003c\/li\u003e\n\u003cli\u003eDrinking-water approved thanks to the brass pump housing, stainless-steel rotor and composite impeller.\u003c\/li\u003e\n\u003cli\u003eA design that makes it easy to remove limescale and foreign deposits by removing the pump head, enabling the product to meet unlimited water hardness requirements.\u003c\/li\u003e\n\u003cli\u003eDry-running protection to prevent failure if the system runs out of water.\u003c\/li\u003e\n\u003cli\u003eMultiple installation positions, even with the pump head pointing downwards.\u003c\/li\u003e\n\u003cli\u003eA pump head designed to fit brass pump housings of old and new pumps of the same design, even from different pump manufacturers (such as Wilo, Vortex, Lowara, DAB and others).\u003c\/li\u003e\n\u003cli\u003eEasy electrical installation with a detachable COMFORT plug and a double insulation protection design, which eliminates the need for a ground wire.\u003c\/li\u003e\n\u003cli\u003eInsulating shell included for reduced heat loss.\u003c\/li\u003e\n\u003cli\u003eNon-return and shut-off valves included in X variant, reducing installation cost.\u003c\/li\u003e\n\u003cli\u003eAn optional venting flange, providing a simple way to vent or drain the system without the need for permanently installing an additional venting valve.\u003c\/li\u003e\n\u003cli\u003eOptional fittings for pipe connections of different sizes and types.\u003c\/li\u003e\n\u003cli\u003eOptional non return and shut-off valves are available.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eControls:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperation mode include: Temperature\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\n\u003cli\u003eLiquid temperature range: 2 .. 95 °C\u003c\/li\u003e\n\u003cli\u003eSelected liquid temperature: 60 °C\u003c\/li\u003e\n\u003cli\u003eDensity: 983.2 kg\/m³\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpeed no: 1\u003c\/li\u003e\n\u003cli\u003eRated flow: 0.45 m³\/h\u003c\/li\u003e\n\u003cli\u003eRated head: 0.9 m\u003c\/li\u003e\n\u003cli\u003eMaximum head: 14 dm\u003c\/li\u003e\n\u003cli\u003eTF class: 95\u003c\/li\u003e\n\u003cli\u003eApprovals: CE,WEEE,RCM,UKCA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump housing: Brass\u003c\/li\u003e\n\u003cli\u003eCuZn39Pb3, MS58\u003c\/li\u003e\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\n\u003cli\u003ePPO-GF20\/Stainless steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMinimum ambient temperature: 0 °C\u003c\/li\u003e\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\n\u003cli\u003ePipe connection standard: ISO 228-1\u003c\/li\u003e\n\u003cli\u003eType of connection: Rp\u003c\/li\u003e\n\u003cli\u003eSize of connection: 1\/2 inch\u003c\/li\u003e\n\u003cli\u003ePressure rating for connection: PN 10\u003c\/li\u003e\n\u003cli\u003ePort-to-port length: 80 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMax. power input: 7 W\u003c\/li\u003e\n\u003cli\u003eMains frequency: 50 \/ 60 Hz\u003c\/li\u003e\n\u003cli\u003eRated voltage: 1 x 230 V\u003c\/li\u003e\n\u003cli\u003eCurrent in speed 3: 0.07 A\u003c\/li\u003e\n\u003cli\u003eEnclosure class (IEC 34-5): IP44\u003c\/li\u003e\n\u003cli\u003eInsulation class (IEC 85): F\u003c\/li\u003e\n\u003cli\u003eEx-protection standard: ELECT.\u003c\/li\u003e\n\u003cli\u003eThermal protection: Impedance protected\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNet weight: 0.9 kg\u003c\/li\u003e\n\u003cli\u003eGross weight: 1 kg\u003c\/li\u003e\n\u003cli\u003eShipping volume: 0.003 m³\u003c\/li\u003e\n\u003cli\u003eCountry of origin: DE\u003c\/li\u003e\n\u003cli\u003eCustom tariff no.: 84137030\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839333003531,"sku":"GRU00001580","price":349.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00001580.png?v=1769102667"},{"product_id":"grundfos-magna1-32-80-99221235","title":"Grundfos MAGNA1 32-80 - 99221235","description":"\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/99234565_09.2023_MAGNA1_DB_GB.pdf?v=1768949236\" target=\"_blank\" title=\"Grundfos MAGNA1 Model C Databooklet\" rel=\"noopener\"\u003eGrundfos MAGNA1 Model C Databooklet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe Grundfos MAGNA1 circulator pump is the simple option for a job well done. With its high energy efficiency, the product complies with the EuP 2015 regulations, ensuring substantial savings on electricity. With its intuitive, user-friendly interface and maintenance-free design, MAGNA1 is the ideal circulator pump for basic performance needs in applications where basic system control and monitoring are desired.\u003c\/p\u003e\n\u003cp\u003eWith this range of circulator pumps, everything from setup to basic control and monitoring are made easy. The pump is maintenance-free due to the canned-rotor type design. MAGNA1 offers the possibility of monitoring the pump via the fault relay output. The digital start and stop input remotely controls the pump. The pump communicates wirelessly with the Grundfos GO Remote app. MAGNA1 can work as the main pump in both heating and cooling applications, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003emixing loops\u003c\/li\u003e\n\u003cli\u003eheating surfaces\u003c\/li\u003e\n\u003cli\u003eair conditioning surfaces\u003c\/li\u003e\n\u003cli\u003eground-source heat pump systems\u003c\/li\u003e\n\u003cli\u003esmall chiller applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMAGNA1 is a single-phase pump characterised by the controller and operating panel being integrated in the control box. The pump housing is available in both cast-iron and stainless-steel versions. The composite rotor can is carbon-fibre reinforced, the bearing plate and rotor cladding are made of stainless steel and the stator housing is made of aluminium. The power electronics are air-cooled.\u003c\/p\u003e\n\u003cp\u003eThe pump incorporates a 4-pole synchronous, permanent-magnet motor (PM motor). This motor type is characterised by higher efficiency than a conventional asynchronous squirrel-cage motor. The pump speed is controlled by an integrated frequency converter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\n\u003cli\u003eLiquid temperature range: -10 .. 110 °C\u003c\/li\u003e\n\u003cli\u003eSelected liquid temperature: 60 °C\u003c\/li\u003e\n\u003cli\u003eDensity: 983.2 kg\/m³\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum head: 80 dm\u003c\/li\u003e\n\u003cli\u003eTF class: 110\u003c\/li\u003e\n\u003cli\u003eApprovals: CE,VDE,EAC,MOROCCO,UKCA,TSE,RCM,UkrSEPRO\u003c\/li\u003e\n\u003cli\u003eModel: C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump housing: Cast iron\u003c\/li\u003e\n\u003cli\u003eEN 1561 EN-GJL-200\u003c\/li\u003e\n\u003cli\u003eASTM A48-200B\u003c\/li\u003e\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRange of ambient temperature: 0 .. 40 °C\u003c\/li\u003e\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\n\u003cli\u003eType of connection: G\u003c\/li\u003e\n\u003cli\u003eSize of connection: 2 inch\u003c\/li\u003e\n\u003cli\u003ePressure rating for connection: PN 10\u003c\/li\u003e\n\u003cli\u003ePort-to-port length: 180mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum power input - P1: 151 W\u003c\/li\u003e\n\u003cli\u003eP1 min: 9 W\u003c\/li\u003e\n\u003cli\u003eMains frequency: 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eRated voltage: 1 x 230 V\u003c\/li\u003e\n\u003cli\u003eMinimum current consumption: 0.09 A\u003c\/li\u003e\n\u003cli\u003eMaximum current consumption: 1.22 A\u003c\/li\u003e\n\u003cli\u003eMaximum speed: 4041 rpm\u003c\/li\u003e\n\u003cli\u003eEnclosure class (IEC 34-5): X4D\u003c\/li\u003e\n\u003cli\u003eInsulation class (IEC 85): F\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnergy (EEI): 0.20\u003c\/li\u003e\n\u003cli\u003eNet weight: 4.61 kg\u003c\/li\u003e\n\u003cli\u003eGross weight: 5.18 kg\u003c\/li\u003e\n\u003cli\u003eShipping volume: 0.013 m³\u003c\/li\u003e\n\u003cli\u003eCountry of origin: DE\u003c\/li\u003e\n\u003cli\u003eCustom tariff no.: 84137030\u003c\/li\u003e\n\u003cli\u003eEnvironmental approvals: CN ROHS,WEEE\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839333429515,"sku":"GRU00001690","price":642.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00001690.png?v=1769102669"},{"product_id":"grundfos-magna1-32-100-99221236","title":"Grundfos MAGNA1 32-100 - 99221236","description":"\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/99234565_09.2023_MAGNA1_DB_GB.pdf?v=1768949236\" target=\"_blank\" title=\"Grundfos MAGNA1 Model C Databooklet\" rel=\"noopener\"\u003eGrundfos MAGNA1 Model C Databooklet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe Grundfos MAGNA1 circulator pump is the simple option for a job well done. With its high energy efficiency, the product complies with the EuP 2015 regulations, ensuring substantial savings on electricity. With its intuitive, user-friendly interface and maintenance-free design, MAGNA1 is the ideal circulator pump for basic performance needs in applications where basic system control and monitoring are desired.\u003c\/p\u003e\n\u003cp\u003eWith this range of circulator pumps, everything from setup to basic control and monitoring are made easy. The pump is maintenance-free due to the canned-rotor type design. MAGNA1 offers the possibility of monitoring the pump via the fault relay output. The digital start and stop input remotely controls the pump. The pump communicates wirelessly with the Grundfos GO Remote app. MAGNA1 can work as the main pump in both heating and cooling applications, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003emixing loops\u003c\/li\u003e\n\u003cli\u003eheating surfaces\u003c\/li\u003e\n\u003cli\u003eair conditioning surfaces\u003c\/li\u003e\n\u003cli\u003eground-source heat pump systems\u003c\/li\u003e\n\u003cli\u003esmall chiller applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMAGNA1 is a single-phase pump characterised by the controller and operating panel being integrated in the control box. The pump housing is available in both cast-iron and stainless-steel versions. The composite rotor can is carbon-fibre reinforced, the bearing plate and rotor cladding are made of stainless steel and the stator housing is made of aluminium. The power electronics are air-cooled.\u003c\/p\u003e\n\u003cp\u003eThe pump incorporates a 4-pole synchronous, permanent-magnet motor (PM motor). This motor type is characterised by higher efficiency than a conventional asynchronous squirrel-cage motor. The pump speed is controlled by an integrated frequency converter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\n\u003cli\u003eLiquid temperature range: -10 .. 110 °C\u003c\/li\u003e\n\u003cli\u003eSelected liquid temperature: 60 °C\u003c\/li\u003e\n\u003cli\u003eDensity: 983.2 kg\/m³\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum head: 100 dm\u003c\/li\u003e\n\u003cli\u003eTF class: 110\u003c\/li\u003e\n\u003cli\u003eApprovals: CE,VDE,EAC,MOROCCO,UKCA,TSE,RCM,UkrSEPRO\u003c\/li\u003e\n\u003cli\u003eModel: C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump housing: Cast iron\u003c\/li\u003e\n\u003cli\u003eEN 1561 EN-GJL-200\u003c\/li\u003e\n\u003cli\u003eASTM A48-200B\u003c\/li\u003e\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRange of ambient temperature: 0 .. 40 °C\u003c\/li\u003e\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\n\u003cli\u003eType of connection: G\u003c\/li\u003e\n\u003cli\u003eSize of connection: 2 inch\u003c\/li\u003e\n\u003cli\u003ePressure rating for connection: PN 10\u003c\/li\u003e\n\u003cli\u003ePort-to-port length: 180mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum power input - P1: 175 W\u003c\/li\u003e\n\u003cli\u003eP1 min: 8 W\u003c\/li\u003e\n\u003cli\u003eMains frequency: 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eRated voltage: 1 x 230 V\u003c\/li\u003e\n\u003cli\u003eMinimum current consumption: 0.08 A\u003c\/li\u003e\n\u003cli\u003eMaximum current consumption: 1.41 A\u003c\/li\u003e\n\u003cli\u003eMaximum speed: 4534 rpm\u003c\/li\u003e\n\u003cli\u003eEnclosure class (IEC 34-5): X4D\u003c\/li\u003e\n\u003cli\u003eInsulation class (IEC 85): F\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnergy (EEI): 0.20\u003c\/li\u003e\n\u003cli\u003eNet weight: 4.63 kg\u003c\/li\u003e\n\u003cli\u003eGross weight: 5.18 kg\u003c\/li\u003e\n\u003cli\u003eShipping volume: 0.013 m³\u003c\/li\u003e\n\u003cli\u003eCountry of origin: DE\u003c\/li\u003e\n\u003cli\u003eCustom tariff no.: 84137030\u003c\/li\u003e\n\u003cli\u003eEnvironmental approvals: CN ROHS,WEEE\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839333462283,"sku":"GRU00001700","price":704.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00001700.png?v=1769102669"},{"product_id":"grundfos-magna1-d-32-60-99221239","title":"Grundfos MAGNA1 D 32-60 - 99221239","description":"\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/99234565_09.2023_MAGNA1_DB_GB.pdf?v=1768949236\" target=\"_blank\" title=\"Grundfos MAGNA1 Model C Databooklet\" rel=\"noopener\"\u003eGrundfos MAGNA1 Model C Databooklet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe Grundfos MAGNA1 D circulator pump is the simple option for a job well done. With its high energy efficiency, the product complies with the EuP 2015 regulations, ensuring substantial savings on electricity. With its intuitive, user-friendly interface and maintenance-free design, MAGNA1 D is the ideal circulator pump for basic performance needs in applications where basic system control and monitoring are desired.\u003c\/p\u003e\n\u003cp\u003eWith this range of circulator pumps, everything from setup to basic control and monitoring are made easy. The pump is maintenance-free due to the canned-rotor type design. MAGNA1 D offers peace of mind due to the security of supply obtained by having a redundant pump, resulting in improved uptime. The flow, and thereby constant comfort, is secured because of its ability to automatically switch between pump heads if one breaks down. The two pumps communicate wirelessly. MAGNA1 D offers the possibility of monitoring the pump via the fault relay output. The digital start and stop input remotely controls the pump. The pump communicates wirelessly with the Grundfos GO Remote app and can also communicate via radio. MAGNA1 D can work as the main pump in both heating and cooling applications, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003emixing loops\u003c\/li\u003e\n\u003cli\u003eheating surfaces\u003c\/li\u003e\n\u003cli\u003eair conditioning surfaces\u003c\/li\u003e\n\u003cli\u003eground-source heat pump systems\u003c\/li\u003e\n\u003cli\u003esmall chiller applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMAGNA1 D is a single-phase pump characterised by the controller and operating panel being integrated in the control box. The pump housing is available in both cast-iron and stainless-steel versions. The composite rotor can is carbon-fibre reinforced, the bearing plate and rotor cladding are made of stainless steel and the stator housing is made of aluminium. The power electronics are air-cooled.\u003c\/p\u003e\n\u003cp\u003eThe pump incorporates a 4-pole synchronous, permanent-magnet motor (PM motor). This motor type is characterised by higher efficiency than a conventional asynchronous squirrel-cage motor. The pump speed is controlled by an integrated frequency converter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\n\u003cli\u003eLiquid temperature range: -10 .. 110 °C\u003c\/li\u003e\n\u003cli\u003eSelected liquid temperature: 60 °C\u003c\/li\u003e\n\u003cli\u003eDensity: 983.2 kg\/m³\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum head: 60 dm\u003c\/li\u003e\n\u003cli\u003eTF class: 110\u003c\/li\u003e\n\u003cli\u003eApprovals: CE,VDE,EAC,MOROCCO,UKCA,TSE,RCM,UkrSEPRO\u003c\/li\u003e\n\u003cli\u003eModel: C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump housing: Cast iron\u003c\/li\u003e\n\u003cli\u003eEN 1561 EN-GJL-200\u003c\/li\u003e\n\u003cli\u003eASTM A48-200B\u003c\/li\u003e\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRange of ambient temperature: 0 .. 40 °C\u003c\/li\u003e\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\n\u003cli\u003eType of connection: G\u003c\/li\u003e\n\u003cli\u003eSize of connection: 2 inch\u003c\/li\u003e\n\u003cli\u003ePressure rating for connection: PN 10\u003c\/li\u003e\n\u003cli\u003ePort-to-port length: 180mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum power input - P1: 111 W\u003c\/li\u003e\n\u003cli\u003eP1 min: 9 W\u003c\/li\u003e\n\u003cli\u003eMains frequency: 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eRated voltage: 1 x 230 V\u003c\/li\u003e\n\u003cli\u003eMinimum current consumption: 0.09 A\u003c\/li\u003e\n\u003cli\u003eMaximum current consumption: 0.9 A\u003c\/li\u003e\n\u003cli\u003eMaximum speed: 3516 rpm\u003c\/li\u003e\n\u003cli\u003eEnclosure class (IEC 34-5): X4D\u003c\/li\u003e\n\u003cli\u003eInsulation class (IEC 85): F\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnergy (EEI): 0.23\u003c\/li\u003e\n\u003cli\u003eNet weight: 11.1 kg\u003c\/li\u003e\n\u003cli\u003eGross weight: 12.8 kg\u003c\/li\u003e\n\u003cli\u003eShipping volume: 0.046 m³\u003c\/li\u003e\n\u003cli\u003eCountry of origin: DE\u003c\/li\u003e\n\u003cli\u003eCustom tariff no.: 84137030\u003c\/li\u003e\n\u003cli\u003eEnvironmental approvals: CN ROHS,WEEE\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839333495051,"sku":"GRU00001710","price":1189.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00001710.png?v=1769102667"},{"product_id":"grundfos-magna1-d-32-80-99221240","title":"Grundfos MAGNA1 D 32-80 - 99221240","description":"\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/99234565_09.2023_MAGNA1_DB_GB.pdf?v=1768949236\" target=\"_blank\" title=\"Grundfos MAGNA1 Model C Databooklet\" rel=\"noopener\"\u003eGrundfos MAGNA1 Model C Databooklet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe Grundfos MAGNA1 D circulator pump is the simple option for a job well done. With its high energy efficiency, the product complies with the EuP 2015 regulations, ensuring substantial savings on electricity. With its intuitive, user-friendly interface and maintenance-free design, MAGNA1 D is the ideal circulator pump for basic performance needs in applications where basic system control and monitoring are desired.\u003c\/p\u003e\n\u003cp\u003eWith this range of circulator pumps, everything from setup to basic control and monitoring are made easy. The pump is maintenance-free due to the canned-rotor type design. MAGNA1 D offers peace of mind due to the security of supply obtained by having a redundant pump, resulting in improved uptime. The flow, and thereby constant comfort, is secured because of its ability to automatically switch between pump heads if one breaks down. The two pumps communicate wirelessly. MAGNA1 D offers the possibility of monitoring the pump via the fault relay output. The digital start and stop input remotely controls the pump. The pump communicates wirelessly with the Grundfos GO Remote app and can also communicate via radio. MAGNA1 D can work as the main pump in both heating and cooling applications, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003emixing loops\u003c\/li\u003e\n\u003cli\u003eheating surfaces\u003c\/li\u003e\n\u003cli\u003eair conditioning surfaces\u003c\/li\u003e\n\u003cli\u003eground-source heat pump systems\u003c\/li\u003e\n\u003cli\u003esmall chiller applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMAGNA1 D is a single-phase pump characterised by the controller and operating panel being integrated in the control box. The pump housing is available in both cast-iron and stainless-steel versions. The composite rotor can is carbon-fibre reinforced, the bearing plate and rotor cladding are made of stainless steel and the stator housing is made of aluminium. The power electronics are air-cooled.\u003c\/p\u003e\n\u003cp\u003eThe pump incorporates a 4-pole synchronous, permanent-magnet motor (PM motor). This motor type is characterised by higher efficiency than a conventional asynchronous squirrel-cage motor. The pump speed is controlled by an integrated frequency converter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\n\u003cli\u003eLiquid temperature range: -10 .. 110 °C\u003c\/li\u003e\n\u003cli\u003eSelected liquid temperature: 60 °C\u003c\/li\u003e\n\u003cli\u003eDensity: 983.2 kg\/m³\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum head: 80 dm\u003c\/li\u003e\n\u003cli\u003eTF class: 110\u003c\/li\u003e\n\u003cli\u003eApprovals: CE,VDE,EAC,MOROCCO,UKCA,TSE,RCM,UkrSEPRO\u003c\/li\u003e\n\u003cli\u003eModel: C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump housing: Cast iron\u003c\/li\u003e\n\u003cli\u003eEN 1561 EN-GJL-200\u003c\/li\u003e\n\u003cli\u003eASTM A48-200B\u003c\/li\u003e\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRange of ambient temperature: 0 .. 40 °C\u003c\/li\u003e\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\n\u003cli\u003eType of connection: G\u003c\/li\u003e\n\u003cli\u003eSize of connection: 2 inch\u003c\/li\u003e\n\u003cli\u003ePressure rating for connection: PN 10\u003c\/li\u003e\n\u003cli\u003ePort-to-port length: 180mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum power input - P1: 151 W\u003c\/li\u003e\n\u003cli\u003eP1 min: 9 W\u003c\/li\u003e\n\u003cli\u003eMains frequency: 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eRated voltage: 1 x 230 V\u003c\/li\u003e\n\u003cli\u003eMinimum current consumption: 0.09 A\u003c\/li\u003e\n\u003cli\u003eMaximum current consumption: 1.22 A\u003c\/li\u003e\n\u003cli\u003eMaximum speed: 4041 rpm\u003c\/li\u003e\n\u003cli\u003eEnclosure class (IEC 34-5): X4D\u003c\/li\u003e\n\u003cli\u003eInsulation class (IEC 85): F\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnergy (EEI): 0.23\u003c\/li\u003e\n\u003cli\u003eNet weight: 11.1 kg\u003c\/li\u003e\n\u003cli\u003eGross weight: 12.8 kg\u003c\/li\u003e\n\u003cli\u003eShipping volume: 0.046 m³\u003c\/li\u003e\n\u003cli\u003eCountry of origin: DE\u003c\/li\u003e\n\u003cli\u003eCustom tariff no.: 84137030\u003c\/li\u003e\n\u003cli\u003eEnvironmental approvals: CN ROHS,WEEE\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839333527819,"sku":"GRU00001720","price":1647.37,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00001720.png?v=1769102666"},{"product_id":"grundfos-magna1-32-40-n-99221253","title":"Grundfos MAGNA1 32-40 N - 99221253","description":"\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/99234565_09.2023_MAGNA1_DB_GB.pdf?v=1768949236\" target=\"_blank\" title=\"Grundfos MAGNA1 Model C Databooklet\" rel=\"noopener\"\u003eGrundfos MAGNA1 Model C Databooklet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe Grundfos MAGNA1 circulator pump is the simple option for a job well done. With its high energy efficiency, the product complies with the EuP 2015 regulations, ensuring substantial savings on electricity. With its intuitive, user-friendly interface and maintenance-free design, MAGNA1 is the ideal circulator pump for basic performance needs in applications where basic system control and monitoring are desired.\u003c\/p\u003e\n\u003cp\u003eWith this range of circulator pumps, everything from setup to basic control and monitoring are made easy. The pump is maintenance-free due to the canned-rotor type design. MAGNA1 offers the possibility of monitoring the pump via the fault relay output. The digital start and stop input remotely controls the pump. The pump communicates wirelessly with the Grundfos GO Remote app. MAGNA1 can work as the main pump in both heating and cooling applications, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003emixing loops\u003c\/li\u003e\n\u003cli\u003eheating surfaces\u003c\/li\u003e\n\u003cli\u003eair conditioning surfaces\u003c\/li\u003e\n\u003cli\u003eground-source heat pump systems\u003c\/li\u003e\n\u003cli\u003esmall chiller applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMAGNA1 is a single-phase pump characterised by the controller and operating panel being integrated in the control box. The pump housing is available in both cast-iron and stainless-steel versions. The composite rotor can is carbon-fibre reinforced, the bearing plate and rotor cladding are made of stainless steel and the stator housing is made of aluminium. The power electronics are air-cooled.\u003c\/p\u003e\n\u003cp\u003eThe pump incorporates a 4-pole synchronous, permanent-magnet motor (PM motor). This motor type is characterised by higher efficiency than a conventional asynchronous squirrel-cage motor. The pump speed is controlled by an integrated frequency converter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\n\u003cli\u003eLiquid temperature range: -10 .. 110 °C\u003c\/li\u003e\n\u003cli\u003eSelected liquid temperature: 60 °C\u003c\/li\u003e\n\u003cli\u003eDensity: 983.2 kg\/m³\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum head: 40 dm\u003c\/li\u003e\n\u003cli\u003eTF class: 110\u003c\/li\u003e\n\u003cli\u003eApprovals: CE,VDE,EAC,MOROCCO,UKCA,TSE,RCM,UkrSEPRO\u003c\/li\u003e\n\u003cli\u003eModel: C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump housing: Stainless steel\u003c\/li\u003e\n\u003cli\u003eEN 1.4308\u003c\/li\u003e\n\u003cli\u003eASTM A351-CF8\u003c\/li\u003e\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRange of ambient temperature: 0 .. 40 °C\u003c\/li\u003e\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\n\u003cli\u003eType of connection: G\u003c\/li\u003e\n\u003cli\u003eSize of connection: 2 inch\u003c\/li\u003e\n\u003cli\u003ePressure rating for connection: PN 10\u003c\/li\u003e\n\u003cli\u003ePort-to-port length: 180mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum power input - P1: 73 W\u003c\/li\u003e\n\u003cli\u003eP1 min: 9 W\u003c\/li\u003e\n\u003cli\u003eMains frequency: 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eRated voltage: 1 x 230 V\u003c\/li\u003e\n\u003cli\u003eMinimum current consumption: 0.09 A\u003c\/li\u003e\n\u003cli\u003eMaximum current consumption: 0.59 A\u003c\/li\u003e\n\u003cli\u003eMaximum speed: 2858 rpm\u003c\/li\u003e\n\u003cli\u003eEnclosure class (IEC 34-5): X4D\u003c\/li\u003e\n\u003cli\u003eInsulation class (IEC 85): F\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnergy (EEI): 0.20\u003c\/li\u003e\n\u003cli\u003eNet weight: 4.88 kg\u003c\/li\u003e\n\u003cli\u003eGross weight: 5.6 kg\u003c\/li\u003e\n\u003cli\u003eShipping volume: 0.013 m³\u003c\/li\u003e\n\u003cli\u003eCountry of origin: DE\u003c\/li\u003e\n\u003cli\u003eCustom tariff no.: 84137030\u003c\/li\u003e\n\u003cli\u003eEnvironmental approvals: CN ROHS,WEEE\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839333560587,"sku":"GRU00001730","price":898.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00001730.png?v=1769102670"},{"product_id":"grundfos-magna1-32-60-n-99221254","title":"Grundfos MAGNA1 32-60 N - 99221254","description":"\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/99234565_09.2023_MAGNA1_DB_GB.pdf?v=1768949236\" target=\"_blank\" title=\"Grundfos MAGNA1 Model C Databooklet\" rel=\"noopener\"\u003eGrundfos MAGNA1 Model C Databooklet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe Grundfos MAGNA1 circulator pump is the simple option for a job well done. With its high energy efficiency, the product complies with the EuP 2015 regulations, ensuring substantial savings on electricity. With its intuitive, user-friendly interface and maintenance-free design, MAGNA1 is the ideal circulator pump for basic performance needs in applications where basic system control and monitoring are desired.\u003c\/p\u003e\n\u003cp\u003eWith this range of circulator pumps, everything from setup to basic control and monitoring are made easy. The pump is maintenance-free due to the canned-rotor type design. MAGNA1 offers the possibility of monitoring the pump via the fault relay output. The digital start and stop input remotely controls the pump. The pump communicates wirelessly with the Grundfos GO Remote app. MAGNA1 can work as the main pump in both heating and cooling applications, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003emixing loops\u003c\/li\u003e\n\u003cli\u003eheating surfaces\u003c\/li\u003e\n\u003cli\u003eair conditioning surfaces\u003c\/li\u003e\n\u003cli\u003eground-source heat pump systems\u003c\/li\u003e\n\u003cli\u003esmall chiller applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMAGNA1 is a single-phase pump characterised by the controller and operating panel being integrated in the control box. The pump housing is available in both cast-iron and stainless-steel versions. The composite rotor can is carbon-fibre reinforced, the bearing plate and rotor cladding are made of stainless steel and the stator housing is made of aluminium. The power electronics are air-cooled.\u003c\/p\u003e\n\u003cp\u003eThe pump incorporates a 4-pole synchronous, permanent-magnet motor (PM motor). This motor type is characterised by higher efficiency than a conventional asynchronous squirrel-cage motor. The pump speed is controlled by an integrated frequency converter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\n\u003cli\u003eLiquid temperature range: -10 .. 110 °C\u003c\/li\u003e\n\u003cli\u003eSelected liquid temperature: 60 °C\u003c\/li\u003e\n\u003cli\u003eDensity: 983.2 kg\/m³\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum head: 60 dm\u003c\/li\u003e\n\u003cli\u003eTF class: 110\u003c\/li\u003e\n\u003cli\u003eApprovals: CE,VDE,EAC,MOROCCO,UKCA,TSE,RCM,UkrSEPRO\u003c\/li\u003e\n\u003cli\u003eModel: C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump housing: Stainless steel\u003c\/li\u003e\n\u003cli\u003eEN 1.4308\u003c\/li\u003e\n\u003cli\u003eASTM A351-CF8\u003c\/li\u003e\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRange of ambient temperature: 0 .. 40 °C\u003c\/li\u003e\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\n\u003cli\u003eType of connection: G\u003c\/li\u003e\n\u003cli\u003eSize of connection: 2 inch\u003c\/li\u003e\n\u003cli\u003ePressure rating for connection: PN 10\u003c\/li\u003e\n\u003cli\u003ePort-to-port length: 180mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum power input - P1: 111 W\u003c\/li\u003e\n\u003cli\u003eP1 min: 9 W\u003c\/li\u003e\n\u003cli\u003eMains frequency: 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eRated voltage: 1 x 230 V\u003c\/li\u003e\n\u003cli\u003eMinimum current consumption: 0.09 A\u003c\/li\u003e\n\u003cli\u003eMaximum current consumption: 0.9 A\u003c\/li\u003e\n\u003cli\u003eMaximum speed: 3516 rpm\u003c\/li\u003e\n\u003cli\u003eEnclosure class (IEC 34-5): X4D\u003c\/li\u003e\n\u003cli\u003eInsulation class (IEC 85): F\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnergy (EEI): 0.20\u003c\/li\u003e\n\u003cli\u003eNet weight: 4.88 kg\u003c\/li\u003e\n\u003cli\u003eGross weight: 5.6 kg\u003c\/li\u003e\n\u003cli\u003eShipping volume: 0.013 m³\u003c\/li\u003e\n\u003cli\u003eCountry of origin: DE\u003c\/li\u003e\n\u003cli\u003eCustom tariff no.: 84137030\u003c\/li\u003e\n\u003cli\u003eEnvironmental approvals: CN ROHS,WEEE\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839333593355,"sku":"GRU00001740","price":1048.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00001740.png?v=1769102669"},{"product_id":"grundfos-magna1-32-80-n-99221255","title":"Grundfos MAGNA1 32-80 N - 99221255","description":"\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/99234565_09.2023_MAGNA1_DB_GB.pdf?v=1768949236\" target=\"_blank\" title=\"Grundfos MAGNA1 Model C Databooklet\" rel=\"noopener\"\u003eGrundfos MAGNA1 Model C Databooklet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe Grundfos MAGNA1 circulator pump is the simple option for a job well done. With its high energy efficiency, the product complies with the EuP 2015 regulations, ensuring substantial savings on electricity. With its intuitive, user-friendly interface and maintenance-free design, MAGNA1 is the ideal circulator pump for basic performance needs in applications where basic system control and monitoring are desired.\u003c\/p\u003e\n\u003cp\u003eWith this range of circulator pumps, everything from setup to basic control and monitoring are made easy. The pump is maintenance-free due to the canned-rotor type design. MAGNA1 offers the possibility of monitoring the pump via the fault relay output. The digital start and stop input remotely controls the pump. The pump communicates wirelessly with the Grundfos GO Remote app. MAGNA1 can work as the main pump in both heating and cooling applications, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003emixing loops\u003c\/li\u003e\n\u003cli\u003eheating surfaces\u003c\/li\u003e\n\u003cli\u003eair conditioning surfaces\u003c\/li\u003e\n\u003cli\u003eground-source heat pump systems\u003c\/li\u003e\n\u003cli\u003esmall chiller applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMAGNA1 is a single-phase pump characterised by the controller and operating panel being integrated in the control box. The pump housing is available in both cast-iron and stainless-steel versions. The composite rotor can is carbon-fibre reinforced, the bearing plate and rotor cladding are made of stainless steel and the stator housing is made of aluminium. The power electronics are air-cooled.\u003c\/p\u003e\n\u003cp\u003eThe pump incorporates a 4-pole synchronous, permanent-magnet motor (PM motor). This motor type is characterised by higher efficiency than a conventional asynchronous squirrel-cage motor. The pump speed is controlled by an integrated frequency converter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\n\u003cli\u003eLiquid temperature range: -10 .. 110 °C\u003c\/li\u003e\n\u003cli\u003eSelected liquid temperature: 60 °C\u003c\/li\u003e\n\u003cli\u003eDensity: 983.2 kg\/m³\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum head: 80 dm\u003c\/li\u003e\n\u003cli\u003eTF class: 110\u003c\/li\u003e\n\u003cli\u003eApprovals: CE,VDE,EAC,MOROCCO,UKCA,TSE,RCM,UkrSEPRO\u003c\/li\u003e\n\u003cli\u003eModel: C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump housing: Stainless steel\u003c\/li\u003e\n\u003cli\u003eEN 1.4308\u003c\/li\u003e\n\u003cli\u003eASTM A351-CF8\u003c\/li\u003e\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRange of ambient temperature: 0 .. 40 °C\u003c\/li\u003e\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\n\u003cli\u003eType of connection: G\u003c\/li\u003e\n\u003cli\u003eSize of connection: 2 inch\u003c\/li\u003e\n\u003cli\u003ePressure rating for connection: PN 10\u003c\/li\u003e\n\u003cli\u003ePort-to-port length: 180mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum power input - P1: 151 W\u003c\/li\u003e\n\u003cli\u003eP1 min: 9 W\u003c\/li\u003e\n\u003cli\u003eMains frequency: 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eRated voltage: 1 x 230 V\u003c\/li\u003e\n\u003cli\u003eMinimum current consumption: 0.09 A\u003c\/li\u003e\n\u003cli\u003eMaximum current consumption: 1.22 A\u003c\/li\u003e\n\u003cli\u003eMaximum speed: 4041 rpm\u003c\/li\u003e\n\u003cli\u003eEnclosure class (IEC 34-5): X4D\u003c\/li\u003e\n\u003cli\u003eInsulation class (IEC 85): F\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnergy (EEI): 0.20\u003c\/li\u003e\n\u003cli\u003eNet weight: 4.88 kg\u003c\/li\u003e\n\u003cli\u003eGross weight: 5.6 kg\u003c\/li\u003e\n\u003cli\u003eShipping volume: 0.013 m³\u003c\/li\u003e\n\u003cli\u003eCountry of origin: DE\u003c\/li\u003e\n\u003cli\u003eCustom tariff no.: 84137030\u003c\/li\u003e\n\u003cli\u003eEnvironmental approvals: CN ROHS,WEEE\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839333626123,"sku":"GRU00001750","price":995.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00001750.png?v=1769102669"},{"product_id":"grundfos-magna1-32-100-n-99221256","title":"Grundfos MAGNA1 32-100 N - 99221256","description":"\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/99234565_09.2023_MAGNA1_DB_GB.pdf?v=1768949236\" target=\"_blank\" title=\"Grundfos MAGNA1 Model C Databooklet\" rel=\"noopener\"\u003eGrundfos MAGNA1 Model C Databooklet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe Grundfos MAGNA1 circulator pump is the simple option for a job well done. With its high energy efficiency, the product complies with the EuP 2015 regulations, ensuring substantial savings on electricity. With its intuitive, user-friendly interface and maintenance-free design, MAGNA1 is the ideal circulator pump for basic performance needs in applications where basic system control and monitoring are desired.\u003c\/p\u003e\n\u003cp\u003eWith this range of circulator pumps, everything from setup to basic control and monitoring are made easy. The pump is maintenance-free due to the canned-rotor type design. MAGNA1 offers the possibility of monitoring the pump via the fault relay output. The digital start and stop input remotely controls the pump. The pump communicates wirelessly with the Grundfos GO Remote app. MAGNA1 can work as the main pump in both heating and cooling applications, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003emixing loops\u003c\/li\u003e\n\u003cli\u003eheating surfaces\u003c\/li\u003e\n\u003cli\u003eair conditioning surfaces\u003c\/li\u003e\n\u003cli\u003eground-source heat pump systems\u003c\/li\u003e\n\u003cli\u003esmall chiller applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMAGNA1 is a single-phase pump characterised by the controller and operating panel being integrated in the control box. The pump housing is available in both cast-iron and stainless-steel versions. The composite rotor can is carbon-fibre reinforced, the bearing plate and rotor cladding are made of stainless steel and the stator housing is made of aluminium. The power electronics are air-cooled.\u003c\/p\u003e\n\u003cp\u003eThe pump incorporates a 4-pole synchronous, permanent-magnet motor (PM motor). This motor type is characterised by higher efficiency than a conventional asynchronous squirrel-cage motor. The pump speed is controlled by an integrated frequency converter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\n\u003cli\u003eLiquid temperature range: -10 .. 110 °C\u003c\/li\u003e\n\u003cli\u003eSelected liquid temperature: 60 °C\u003c\/li\u003e\n\u003cli\u003eDensity: 983.2 kg\/m³\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum head: 100 dm\u003c\/li\u003e\n\u003cli\u003eTF class: 110\u003c\/li\u003e\n\u003cli\u003eApprovals: CE,VDE,EAC,MOROCCO,UKCA,TSE,RCM,UkrSEPRO\u003c\/li\u003e\n\u003cli\u003eModel: C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump housing: Stainless steel\u003c\/li\u003e\n\u003cli\u003eEN 1.4308\u003c\/li\u003e\n\u003cli\u003eASTM A351-CF8\u003c\/li\u003e\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRange of ambient temperature: 0 .. 40 °C\u003c\/li\u003e\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\n\u003cli\u003eType of connection: G\u003c\/li\u003e\n\u003cli\u003eSize of connection: 2 inch\u003c\/li\u003e\n\u003cli\u003ePressure rating for connection: PN 10\u003c\/li\u003e\n\u003cli\u003ePort-to-port length: 180mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum power input - P1: 175 W\u003c\/li\u003e\n\u003cli\u003eP1 min: 8 W\u003c\/li\u003e\n\u003cli\u003eMains frequency: 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eRated voltage: 1 x 230 V\u003c\/li\u003e\n\u003cli\u003eMinimum current consumption: 0.08 A\u003c\/li\u003e\n\u003cli\u003eMaximum current consumption: 1.41 A\u003c\/li\u003e\n\u003cli\u003eMaximum speed: 4534 rpm\u003c\/li\u003e\n\u003cli\u003eEnclosure class (IEC 34-5): X4D\u003c\/li\u003e\n\u003cli\u003eInsulation class (IEC 85): F\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnergy (EEI): 0.20\u003c\/li\u003e\n\u003cli\u003eNet weight: 4.89 kg\u003c\/li\u003e\n\u003cli\u003eGross weight: 5.7 kg\u003c\/li\u003e\n\u003cli\u003eShipping volume: 0.013 m³\u003c\/li\u003e\n\u003cli\u003eCountry of origin: DE\u003c\/li\u003e\n\u003cli\u003eCustom tariff no.: 84137030\u003c\/li\u003e\n\u003cli\u003eEnvironmental approvals: CN ROHS,WEEE\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839333658891,"sku":"GRU00001760","price":1197.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00001760.png?v=1769102669"},{"product_id":"grundfos-magna1-32-120-99221281","title":"Grundfos MAGNA1 32-120 - 99221281","description":"\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/99234565_09.2023_MAGNA1_DB_GB.pdf?v=1768949236\" target=\"_blank\" title=\"Grundfos MAGNA1 Model C Databooklet\" rel=\"noopener\"\u003eGrundfos MAGNA1 Model C Databooklet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe Grundfos MAGNA1 circulator pump is the simple option for a job well done. With its high energy efficiency, the product complies with the EuP 2015 regulations, ensuring substantial savings on electricity. With its intuitive, user-friendly interface and maintenance-free design, MAGNA1 is the ideal circulator pump for basic performance needs in applications where basic system control and monitoring are desired.\u003c\/p\u003e\n\u003cp\u003eWith this range of circulator pumps, everything from setup to basic control and monitoring are made easy. The pump is maintenance-free due to the canned-rotor type design. MAGNA1 offers the possibility of monitoring the pump via the fault relay output. The digital start and stop input remotely controls the pump. The pump communicates wirelessly with the Grundfos GO Remote app. MAGNA1 can work as the main pump in both heating and cooling applications, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003emixing loops\u003c\/li\u003e\n\u003cli\u003eheating surfaces\u003c\/li\u003e\n\u003cli\u003eair conditioning surfaces\u003c\/li\u003e\n\u003cli\u003eground-source heat pump systems\u003c\/li\u003e\n\u003cli\u003esmall chiller applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMAGNA1 is a single-phase pump characterised by the controller and operating panel being integrated in the control box. The pump housing is available in both cast-iron and stainless-steel versions. The composite rotor can is carbon-fibre reinforced, the bearing plate and rotor cladding are made of stainless steel and the stator housing is made of aluminium. The power electronics are air-cooled.\u003c\/p\u003e\n\u003cp\u003eThe pump incorporates a 4-pole synchronous, permanent-magnet motor (PM motor). This motor type is characterised by higher efficiency than a conventional asynchronous squirrel-cage motor. The pump speed is controlled by an integrated frequency converter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\n\u003cli\u003eLiquid temperature range: -10 .. 110 °C\u003c\/li\u003e\n\u003cli\u003eSelected liquid temperature: 60 °C\u003c\/li\u003e\n\u003cli\u003eDensity: 983.2 kg\/m³\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum head: 120 dm\u003c\/li\u003e\n\u003cli\u003eTF class: 110\u003c\/li\u003e\n\u003cli\u003eApprovals: CE,VDE,EAC,MOROCCO,UKCA,TSE,RCM,UkrSEPRO\u003c\/li\u003e\n\u003cli\u003eModel: C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump housing: Cast iron\u003c\/li\u003e\n\u003cli\u003eEN 1561 EN-GJL-200\u003c\/li\u003e\n\u003cli\u003eASTM A48-200B\u003c\/li\u003e\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRange of ambient temperature: 0 .. 40 °C\u003c\/li\u003e\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\n\u003cli\u003eType of connection: G\u003c\/li\u003e\n\u003cli\u003eSize of connection: 2 inch\u003c\/li\u003e\n\u003cli\u003ePressure rating for connection: PN 10\u003c\/li\u003e\n\u003cli\u003ePort-to-port length: 180mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum power input - P1: 188 W\u003c\/li\u003e\n\u003cli\u003eP1 min: 8 W\u003c\/li\u003e\n\u003cli\u003eMains frequency: 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eRated voltage: 1 x 230 V\u003c\/li\u003e\n\u003cli\u003eMinimum current consumption: 0.08 A\u003c\/li\u003e\n\u003cli\u003eMaximum current consumption: 1.51 A\u003c\/li\u003e\n\u003cli\u003eMaximum speed: 4953 rpm\u003c\/li\u003e\n\u003cli\u003eEnclosure class (IEC 34-5): X4D\u003c\/li\u003e\n\u003cli\u003eInsulation class (IEC 85): F\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnergy (EEI): 0.20\u003c\/li\u003e\n\u003cli\u003eNet weight: 4.63 kg\u003c\/li\u003e\n\u003cli\u003eGross weight: 5.2 kg\u003c\/li\u003e\n\u003cli\u003eShipping volume: 0.013 m³\u003c\/li\u003e\n\u003cli\u003eCountry of origin: DE\u003c\/li\u003e\n\u003cli\u003eCustom tariff no.: 84137030\u003c\/li\u003e\n\u003cli\u003eEnvironmental approvals: CN ROHS,WEEE\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839333691659,"sku":"GRU00001770","price":986.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00001770.png?v=1769102669"},{"product_id":"grundfos-magna1-32-120-f-99221285","title":"Grundfos MAGNA1 32-120 F - 99221285","description":"\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/99234565_09.2023_MAGNA1_DB_GB.pdf?v=1768949236\" target=\"_blank\" title=\"Grundfos MAGNA1 Model C Databooklet\" rel=\"noopener\"\u003eGrundfos MAGNA1 Model C Databooklet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe Grundfos MAGNA1 circulator pump is the simple option for a job well done. With its high energy efficiency, the product complies with the EuP 2015 regulations, ensuring substantial savings on electricity. With its intuitive, user-friendly interface and maintenance-free design, MAGNA1 is the ideal circulator pump for basic performance needs in applications where basic system control and monitoring are desired.\u003c\/p\u003e\n\u003cp\u003eWith this range of circulator pumps, everything from setup to basic control and monitoring are made easy. The pump is maintenance-free due to the canned-rotor type design. MAGNA1 offers the possibility of monitoring the pump via the fault relay output. The digital start and stop input remotely controls the pump. The pump communicates wirelessly with the Grundfos GO Remote app. MAGNA1 can work as the main pump in both heating and cooling applications, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003emixing loops\u003c\/li\u003e\n\u003cli\u003eheating surfaces\u003c\/li\u003e\n\u003cli\u003eair conditioning surfaces\u003c\/li\u003e\n\u003cli\u003eground-source heat pump systems\u003c\/li\u003e\n\u003cli\u003esmall chiller applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMAGNA1 is a single-phase pump characterised by the controller and operating panel being integrated in the control box. The pump housing is available in both cast-iron and stainless-steel versions. The composite rotor can is carbon-fibre reinforced, the bearing plate and rotor cladding are made of stainless steel and the stator housing is made of aluminium. The power electronics are air-cooled.\u003c\/p\u003e\n\u003cp\u003eThe pump incorporates a 4-pole synchronous, permanent-magnet motor (PM motor). This motor type is characterised by higher efficiency than a conventional asynchronous squirrel-cage motor. The pump speed is controlled by an integrated frequency converter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\n\u003cli\u003eLiquid temperature range: -10 .. 110 °C\u003c\/li\u003e\n\u003cli\u003eSelected liquid temperature: 60 °C\u003c\/li\u003e\n\u003cli\u003eDensity: 983.2 kg\/m³\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum head: 120 dm\u003c\/li\u003e\n\u003cli\u003eTF class: 110\u003c\/li\u003e\n\u003cli\u003eApprovals: CE,VDE,EAC,MOROCCO,UKCA,TSE,RCM,UkrSEPRO\u003c\/li\u003e\n\u003cli\u003eModel: C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump housing: Cast iron\u003c\/li\u003e\n\u003cli\u003eEN 1561 EN-GJL-200\u003c\/li\u003e\n\u003cli\u003eASTM A48-200B\u003c\/li\u003e\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRange of ambient temperature: 0 .. 40 °C\u003c\/li\u003e\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\n\u003cli\u003eType of connection: DIN\u003c\/li\u003e\n\u003cli\u003eSize of connection: DN 32\u003c\/li\u003e\n\u003cli\u003ePressure rating for connection: PN 6\/10\u003c\/li\u003e\n\u003cli\u003ePort-to-port length: 220mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum power input - P1: 329 W\u003c\/li\u003e\n\u003cli\u003eP1 min: 14.89 W\u003c\/li\u003e\n\u003cli\u003eMains frequency: 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eRated voltage: 1 x 230 V\u003c\/li\u003e\n\u003cli\u003eMinimum current consumption: 0.17 A\u003c\/li\u003e\n\u003cli\u003eMaximum current consumption: 1.48 A\u003c\/li\u003e\n\u003cli\u003eMaximum speed: 4754 rpm\u003c\/li\u003e\n\u003cli\u003eEnclosure class (IEC 34-5): X4D\u003c\/li\u003e\n\u003cli\u003eInsulation class (IEC 85): F\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnergy (EEI): 0.20\u003c\/li\u003e\n\u003cli\u003eNet weight: 15.2 kg\u003c\/li\u003e\n\u003cli\u003eGross weight: 16.9 kg\u003c\/li\u003e\n\u003cli\u003eShipping volume: 0.039 m³\u003c\/li\u003e\n\u003cli\u003eCountry of origin: DE\u003c\/li\u003e\n\u003cli\u003eCustom tariff no.: 84137030\u003c\/li\u003e\n\u003cli\u003eEnvironmental approvals: CN ROHS,WEEE\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839333724427,"sku":"GRU00001780","price":1097.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00001780.png?v=1769102668"},{"product_id":"grundfos-magna1-40-60-f-99221292","title":"Grundfos MAGNA1 40-60 F - 99221292","description":"\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/99234565_09.2023_MAGNA1_DB_GB.pdf?v=1768949236\" target=\"_blank\" title=\"Grundfos MAGNA1 Model C Databooklet\" rel=\"noopener\"\u003eGrundfos MAGNA1 Model C Databooklet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe Grundfos MAGNA1 circulator pump is the simple option for a job well done. With its high energy efficiency, the product complies with the EuP 2015 regulations, ensuring substantial savings on electricity. With its intuitive, user-friendly interface and maintenance-free design, MAGNA1 is the ideal circulator pump for basic performance needs in applications where basic system control and monitoring are desired.\u003c\/p\u003e\n\u003cp\u003eWith this range of circulator pumps, everything from setup to basic control and monitoring are made easy. The pump is maintenance-free due to the canned-rotor type design. MAGNA1 offers the possibility of monitoring the pump via the fault relay output. The digital start and stop input remotely controls the pump. The pump communicates wirelessly with the Grundfos GO Remote app. MAGNA1 can work as the main pump in both heating and cooling applications, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003emixing loops\u003c\/li\u003e\n\u003cli\u003eheating surfaces\u003c\/li\u003e\n\u003cli\u003eair conditioning surfaces\u003c\/li\u003e\n\u003cli\u003eground-source heat pump systems\u003c\/li\u003e\n\u003cli\u003esmall chiller applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMAGNA1 is a single-phase pump characterised by the controller and operating panel being integrated in the control box. The pump housing is available in both cast-iron and stainless-steel versions. The composite rotor can is carbon-fibre reinforced, the bearing plate and rotor cladding are made of stainless steel and the stator housing is made of aluminium. The power electronics are air-cooled.\u003c\/p\u003e\n\u003cp\u003eThe pump incorporates a 4-pole synchronous, permanent-magnet motor (PM motor). This motor type is characterised by higher efficiency than a conventional asynchronous squirrel-cage motor. The pump speed is controlled by an integrated frequency converter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\n\u003cli\u003eLiquid temperature range: -10 .. 110 °C\u003c\/li\u003e\n\u003cli\u003eSelected liquid temperature: 60 °C\u003c\/li\u003e\n\u003cli\u003eDensity: 983.2 kg\/m³\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum head: 60 dm\u003c\/li\u003e\n\u003cli\u003eTF class: 110\u003c\/li\u003e\n\u003cli\u003eApprovals: CE,VDE,EAC,MOROCCO,UKCA,TSE,RCM,UkrSEPRO\u003c\/li\u003e\n\u003cli\u003eModel: C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump housing: Cast iron\u003c\/li\u003e\n\u003cli\u003eEN 1561 EN-GJL-200\u003c\/li\u003e\n\u003cli\u003eASTM A48-200B\u003c\/li\u003e\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRange of ambient temperature: 0 .. 40 °C\u003c\/li\u003e\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\n\u003cli\u003eType of connection: DIN\u003c\/li\u003e\n\u003cli\u003eSize of connection: DN 40\u003c\/li\u003e\n\u003cli\u003ePressure rating for connection: PN 6\/10\u003c\/li\u003e\n\u003cli\u003ePort-to-port length: 220mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum power input - P1: 194 W\u003c\/li\u003e\n\u003cli\u003eP1 min: 12 W\u003c\/li\u003e\n\u003cli\u003eMains frequency: 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eRated voltage: 1 x 230 V\u003c\/li\u003e\n\u003cli\u003eMinimum current consumption: 0.11 A\u003c\/li\u003e\n\u003cli\u003eMaximum current consumption: 1.56 A\u003c\/li\u003e\n\u003cli\u003eMaximum speed: 3636 rpm\u003c\/li\u003e\n\u003cli\u003eEnclosure class (IEC 34-5): X4D\u003c\/li\u003e\n\u003cli\u003eInsulation class (IEC 85): F\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnergy (EEI): 0.20\u003c\/li\u003e\n\u003cli\u003eNet weight: 9.57 kg\u003c\/li\u003e\n\u003cli\u003eGross weight: 10.2 kg\u003c\/li\u003e\n\u003cli\u003eShipping volume: 0.016 m³\u003c\/li\u003e\n\u003cli\u003eCountry of origin: DE\u003c\/li\u003e\n\u003cli\u003eCustom tariff no.: 84137030\u003c\/li\u003e\n\u003cli\u003eEnvironmental approvals: CN ROHS,WEEE\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839333757195,"sku":"GRU00001790","price":793.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00001790.png?v=1769102669"},{"product_id":"grundfos-magna1-d-40-40-f-99221293","title":"Grundfos MAGNA1 D 40-40 F - 99221293","description":"\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/99234565_09.2023_MAGNA1_DB_GB.pdf?v=1768949236\" target=\"_blank\" title=\"Grundfos MAGNA1 Model C Databooklet\" rel=\"noopener\"\u003eGrundfos MAGNA1 Model C Databooklet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe Grundfos MAGNA1 D circulator pump is the simple option for a job well done. With its high energy efficiency, the product complies with the EuP 2015 regulations, ensuring substantial savings on electricity. With its intuitive, user-friendly interface and maintenance-free design, MAGNA1 D is the ideal circulator pump for basic performance needs in applications where basic system control and monitoring are desired.\u003c\/p\u003e\n\u003cp\u003eWith this range of circulator pumps, everything from setup to basic control and monitoring are made easy. The pump is maintenance-free due to the canned-rotor type design. MAGNA1 D offers peace of mind due to the security of supply obtained by having a redundant pump, resulting in improved uptime. The flow, and thereby constant comfort, is secured because of its ability to automatically switch between pump heads if one breaks down. The two pumps communicate wirelessly. MAGNA1 D offers the possibility of monitoring the pump via the fault relay output. The digital start and stop input remotely controls the pump. The pump communicates wirelessly with the Grundfos GO Remote app and can also communicate via radio. MAGNA1 D can work as the main pump in both heating and cooling applications, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003emixing loops\u003c\/li\u003e\n\u003cli\u003eheating surfaces\u003c\/li\u003e\n\u003cli\u003eair conditioning surfaces\u003c\/li\u003e\n\u003cli\u003eground-source heat pump systems\u003c\/li\u003e\n\u003cli\u003esmall chiller applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMAGNA1 D is a single-phase pump characterised by the controller and operating panel being integrated in the control box. The pump housing is available in both cast-iron and stainless-steel versions. The composite rotor can is carbon-fibre reinforced, the bearing plate and rotor cladding are made of stainless steel and the stator housing is made of aluminium. The power electronics are air-cooled.\u003c\/p\u003e\n\u003cp\u003eThe pump incorporates a 4-pole synchronous, permanent-magnet motor (PM motor). This motor type is characterised by higher efficiency than a conventional asynchronous squirrel-cage motor. The pump speed is controlled by an integrated frequency converter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\n\u003cli\u003eLiquid temperature range: -10 .. 110 °C\u003c\/li\u003e\n\u003cli\u003eSelected liquid temperature: 60 °C\u003c\/li\u003e\n\u003cli\u003eDensity: 983.2 kg\/m³\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum head: 40 dm\u003c\/li\u003e\n\u003cli\u003eTF class: 110\u003c\/li\u003e\n\u003cli\u003eApprovals: CE,VDE,EAC,MOROCCO,UKCA,TSE,RCM,UkrSEPRO\u003c\/li\u003e\n\u003cli\u003eModel: C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump housing: Cast iron\u003c\/li\u003e\n\u003cli\u003eEN 1561 EN-GJL-200\u003c\/li\u003e\n\u003cli\u003eASTM A48-200B\u003c\/li\u003e\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRange of ambient temperature: 0 .. 40 °C\u003c\/li\u003e\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\n\u003cli\u003eType of connection: DIN\u003c\/li\u003e\n\u003cli\u003eSize of connection: DN 40\u003c\/li\u003e\n\u003cli\u003ePressure rating for connection: PN 6\/10\u003c\/li\u003e\n\u003cli\u003ePort-to-port length: 220mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum power input - P1: 90 W\u003c\/li\u003e\n\u003cli\u003eP1 min: 12 W\u003c\/li\u003e\n\u003cli\u003eMains frequency: 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eRated voltage: 1 x 230 V\u003c\/li\u003e\n\u003cli\u003eMinimum current consumption: 0.11 A\u003c\/li\u003e\n\u003cli\u003eMaximum current consumption: 0.72 A\u003c\/li\u003e\n\u003cli\u003eMaximum speed: 2964 rpm\u003c\/li\u003e\n\u003cli\u003eEnclosure class (IEC 34-5): X4D\u003c\/li\u003e\n\u003cli\u003eInsulation class (IEC 85): F\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnergy (EEI): 0.22\u003c\/li\u003e\n\u003cli\u003eNet weight: 18.7 kg\u003c\/li\u003e\n\u003cli\u003eGross weight: 20.4 kg\u003c\/li\u003e\n\u003cli\u003eShipping volume: 0.046 m³\u003c\/li\u003e\n\u003cli\u003eCountry of origin: DE\u003c\/li\u003e\n\u003cli\u003eCustom tariff no.: 84137030\u003c\/li\u003e\n\u003cli\u003eEnvironmental approvals: CN ROHS,WEEE\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839333789963,"sku":"GRU00001800","price":1795.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00001800.png?v=1769102667"},{"product_id":"grundfos-magna1-d-40-60-f-99221294","title":"Grundfos MAGNA1 D 40-60 F - 99221294","description":"\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/99234565_09.2023_MAGNA1_DB_GB.pdf?v=1768949236\" target=\"_blank\" title=\"Grundfos MAGNA1 Model C Databooklet\" rel=\"noopener\"\u003eGrundfos MAGNA1 Model C Databooklet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe Grundfos MAGNA1 D circulator pump is the simple option for a job well done. With its high energy efficiency, the product complies with the EuP 2015 regulations, ensuring substantial savings on electricity. With its intuitive, user-friendly interface and maintenance-free design, MAGNA1 D is the ideal circulator pump for basic performance needs in applications where basic system control and monitoring are desired.\u003c\/p\u003e\n\u003cp\u003eWith this range of circulator pumps, everything from setup to basic control and monitoring are made easy. The pump is maintenance-free due to the canned-rotor type design. MAGNA1 D offers peace of mind due to the security of supply obtained by having a redundant pump, resulting in improved uptime. The flow, and thereby constant comfort, is secured because of its ability to automatically switch between pump heads if one breaks down. The two pumps communicate wirelessly. MAGNA1 D offers the possibility of monitoring the pump via the fault relay output. The digital start and stop input remotely controls the pump. The pump communicates wirelessly with the Grundfos GO Remote app and can also communicate via radio. MAGNA1 D can work as the main pump in both heating and cooling applications, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003emixing loops\u003c\/li\u003e\n\u003cli\u003eheating surfaces\u003c\/li\u003e\n\u003cli\u003eair conditioning surfaces\u003c\/li\u003e\n\u003cli\u003eground-source heat pump systems\u003c\/li\u003e\n\u003cli\u003esmall chiller applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMAGNA1 D is a single-phase pump characterised by the controller and operating panel being integrated in the control box. The pump housing is available in both cast-iron and stainless-steel versions. The composite rotor can is carbon-fibre reinforced, the bearing plate and rotor cladding are made of stainless steel and the stator housing is made of aluminium. The power electronics are air-cooled.\u003c\/p\u003e\n\u003cp\u003eThe pump incorporates a 4-pole synchronous, permanent-magnet motor (PM motor). This motor type is characterised by higher efficiency than a conventional asynchronous squirrel-cage motor. The pump speed is controlled by an integrated frequency converter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\n\u003cli\u003eLiquid temperature range: -10 .. 110 °C\u003c\/li\u003e\n\u003cli\u003eSelected liquid temperature: 60 °C\u003c\/li\u003e\n\u003cli\u003eDensity: 983.2 kg\/m³\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum head: 60 dm\u003c\/li\u003e\n\u003cli\u003eTF class: 110\u003c\/li\u003e\n\u003cli\u003eApprovals: CE,VDE,EAC,MOROCCO,UKCA,TSE,RCM,UkrSEPRO\u003c\/li\u003e\n\u003cli\u003eModel: C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump housing: Cast iron\u003c\/li\u003e\n\u003cli\u003eEN 1561 EN-GJL-200\u003c\/li\u003e\n\u003cli\u003eASTM A48-200B\u003c\/li\u003e\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRange of ambient temperature: 0 .. 40 °C\u003c\/li\u003e\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\n\u003cli\u003eType of connection: DIN\u003c\/li\u003e\n\u003cli\u003eSize of connection: DN 40\u003c\/li\u003e\n\u003cli\u003ePressure rating for connection: PN 6\/10\u003c\/li\u003e\n\u003cli\u003ePort-to-port length: 220mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum power input - P1: 194 W\u003c\/li\u003e\n\u003cli\u003eP1 min: 12 W\u003c\/li\u003e\n\u003cli\u003eMains frequency: 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eRated voltage: 1 x 230 V\u003c\/li\u003e\n\u003cli\u003eMinimum current consumption: 0.11 A\u003c\/li\u003e\n\u003cli\u003eMaximum current consumption: 1.56 A\u003c\/li\u003e\n\u003cli\u003eMaximum speed: 3636 rpm\u003c\/li\u003e\n\u003cli\u003eEnclosure class (IEC 34-5): X4D\u003c\/li\u003e\n\u003cli\u003eInsulation class (IEC 85): F\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnergy (EEI): 0.22\u003c\/li\u003e\n\u003cli\u003eNet weight: 18.7 kg\u003c\/li\u003e\n\u003cli\u003eGross weight: 20.4 kg\u003c\/li\u003e\n\u003cli\u003eShipping volume: 0.046 m³\u003c\/li\u003e\n\u003cli\u003eCountry of origin: DE\u003c\/li\u003e\n\u003cli\u003eCustom tariff no.: 84137030\u003c\/li\u003e\n\u003cli\u003eEnvironmental approvals: CN ROHS,WEEE\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839333822731,"sku":"GRU00001810","price":1479.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00001810.png?v=1769102667"},{"product_id":"grundfos-magna1-40-80-f-99221303","title":"Grundfos MAGNA1 40-80 F - 99221303","description":"\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/99234565_09.2023_MAGNA1_DB_GB.pdf?v=1768949236\" target=\"_blank\" title=\"Grundfos MAGNA1 Model C Databooklet\" rel=\"noopener\"\u003eGrundfos MAGNA1 Model C Databooklet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe Grundfos MAGNA1 circulator pump is the simple option for a job well done. With its high energy efficiency, the product complies with the EuP 2015 regulations, ensuring substantial savings on electricity. With its intuitive, user-friendly interface and maintenance-free design, MAGNA1 is the ideal circulator pump for basic performance needs in applications where basic system control and monitoring are desired.\u003c\/p\u003e\n\u003cp\u003eWith this range of circulator pumps, everything from setup to basic control and monitoring are made easy. The pump is maintenance-free due to the canned-rotor type design. MAGNA1 offers the possibility of monitoring the pump via the fault relay output. The digital start and stop input remotely controls the pump. The pump communicates wirelessly with the Grundfos GO Remote app. MAGNA1 can work as the main pump in both heating and cooling applications, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003emixing loops\u003c\/li\u003e\n\u003cli\u003eheating surfaces\u003c\/li\u003e\n\u003cli\u003eair conditioning surfaces\u003c\/li\u003e\n\u003cli\u003eground-source heat pump systems\u003c\/li\u003e\n\u003cli\u003esmall chiller applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMAGNA1 is a single-phase pump characterised by the controller and operating panel being integrated in the control box. The pump housing is available in both cast-iron and stainless-steel versions. The composite rotor can is carbon-fibre reinforced, the bearing plate and rotor cladding are made of stainless steel and the stator housing is made of aluminium. The power electronics are air-cooled.\u003c\/p\u003e\n\u003cp\u003eThe pump incorporates a 4-pole synchronous, permanent-magnet motor (PM motor). This motor type is characterised by higher efficiency than a conventional asynchronous squirrel-cage motor. The pump speed is controlled by an integrated frequency converter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\n\u003cli\u003eLiquid temperature range: -10 .. 110 °C\u003c\/li\u003e\n\u003cli\u003eSelected liquid temperature: 60 °C\u003c\/li\u003e\n\u003cli\u003eDensity: 983.2 kg\/m³\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum head: 80 dm\u003c\/li\u003e\n\u003cli\u003eTF class: 110\u003c\/li\u003e\n\u003cli\u003eApprovals: CE,VDE,EAC,MOROCCO,UKCA,TSE,RCM,UkrSEPRO\u003c\/li\u003e\n\u003cli\u003eModel: C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump housing: Cast iron\u003c\/li\u003e\n\u003cli\u003eEN 1561 EN-GJL-200\u003c\/li\u003e\n\u003cli\u003eASTM A48-200B\u003c\/li\u003e\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRange of ambient temperature: 0 .. 40 °C\u003c\/li\u003e\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\n\u003cli\u003eType of connection: DN\u003c\/li\u003e\n\u003cli\u003eSize of connection: DN 40\u003c\/li\u003e\n\u003cli\u003ePressure rating for connection: PN 6\/10\u003c\/li\u003e\n\u003cli\u003ePort-to-port length: 220mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum power input - P1: 267 W\u003c\/li\u003e\n\u003cli\u003eP1 min: 17.03 W\u003c\/li\u003e\n\u003cli\u003eMains frequency: 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eRated voltage: 1 x 230 V\u003c\/li\u003e\n\u003cli\u003eMinimum current consumption: 0.19 A\u003c\/li\u003e\n\u003cli\u003eMaximum current consumption: 1.18 A\u003c\/li\u003e\n\u003cli\u003eMaximum speed: 4285 rpm\u003c\/li\u003e\n\u003cli\u003eEnclosure class (IEC 34-5): X4D\u003c\/li\u003e\n\u003cli\u003eInsulation class (IEC 85): F\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnergy (EEI): 0.20\u003c\/li\u003e\n\u003cli\u003eNet weight: 16.3 kg\u003c\/li\u003e\n\u003cli\u003eGross weight: 17.7 kg\u003c\/li\u003e\n\u003cli\u003eShipping volume: 0.039 m³\u003c\/li\u003e\n\u003cli\u003eCountry of origin: DE\u003c\/li\u003e\n\u003cli\u003eCustom tariff no.: 84137030\u003c\/li\u003e\n\u003cli\u003eEnvironmental approvals: CN ROHS,WEEE\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839333855499,"sku":"GRU00001820","price":1051.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00001820.png?v=1769102668"},{"product_id":"grundfos-magna1-40-100-f-99221304","title":"Grundfos MAGNA1 40-100 F - 99221304","description":"\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/99234565_09.2023_MAGNA1_DB_GB.pdf?v=1768949236\" target=\"_blank\" title=\"Grundfos MAGNA1 Model C Databooklet\" rel=\"noopener\"\u003eGrundfos MAGNA1 Model C Databooklet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe Grundfos MAGNA1 circulator pump is the simple option for a job well done. With its high energy efficiency, the product complies with the EuP 2015 regulations, ensuring substantial savings on electricity. With its intuitive, user-friendly interface and maintenance-free design, MAGNA1 is the ideal circulator pump for basic performance needs in applications where basic system control and monitoring are desired.\u003c\/p\u003e\n\u003cp\u003eWith this range of circulator pumps, everything from setup to basic control and monitoring are made easy. The pump is maintenance-free due to the canned-rotor type design. MAGNA1 offers the possibility of monitoring the pump via the fault relay output. The digital start and stop input remotely controls the pump. The pump communicates wirelessly with the Grundfos GO Remote app. MAGNA1 can work as the main pump in both heating and cooling applications, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003emixing loops\u003c\/li\u003e\n\u003cli\u003eheating surfaces\u003c\/li\u003e\n\u003cli\u003eair conditioning surfaces\u003c\/li\u003e\n\u003cli\u003eground-source heat pump systems\u003c\/li\u003e\n\u003cli\u003esmall chiller applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMAGNA1 is a single-phase pump characterised by the controller and operating panel being integrated in the control box. The pump housing is available in both cast-iron and stainless-steel versions. The composite rotor can is carbon-fibre reinforced, the bearing plate and rotor cladding are made of stainless steel and the stator housing is made of aluminium. The power electronics are air-cooled.\u003c\/p\u003e\n\u003cp\u003eThe pump incorporates a 4-pole synchronous, permanent-magnet motor (PM motor). This motor type is characterised by higher efficiency than a conventional asynchronous squirrel-cage motor. The pump speed is controlled by an integrated frequency converter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\n\u003cli\u003eLiquid temperature range: -10 .. 110 °C\u003c\/li\u003e\n\u003cli\u003eSelected liquid temperature: 60 °C\u003c\/li\u003e\n\u003cli\u003eDensity: 983.2 kg\/m³\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum head: 100 dm\u003c\/li\u003e\n\u003cli\u003eTF class: 110\u003c\/li\u003e\n\u003cli\u003eApprovals: CE,VDE,EAC,MOROCCO,UKCA,TSE,RCM,UkrSEPRO\u003c\/li\u003e\n\u003cli\u003eModel: C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump housing: Cast iron\u003c\/li\u003e\n\u003cli\u003eEN 1561 EN-GJL-200\u003c\/li\u003e\n\u003cli\u003eASTM A48-200B\u003c\/li\u003e\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRange of ambient temperature: 0 .. 40 °C\u003c\/li\u003e\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\n\u003cli\u003eType of connection: DN\u003c\/li\u003e\n\u003cli\u003eSize of connection: DN 40\u003c\/li\u003e\n\u003cli\u003ePressure rating for connection: PN 6\/10\u003c\/li\u003e\n\u003cli\u003ePort-to-port length: 220mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum power input - P1: 370 W\u003c\/li\u003e\n\u003cli\u003eP1 min: 17.03 W\u003c\/li\u003e\n\u003cli\u003eMains frequency: 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eRated voltage: 1 x 230 V\u003c\/li\u003e\n\u003cli\u003eMinimum current consumption: 0.19 A\u003c\/li\u003e\n\u003cli\u003eMaximum current consumption: 1.65 A\u003c\/li\u003e\n\u003cli\u003eMaximum speed: 4793 rpm\u003c\/li\u003e\n\u003cli\u003eEnclosure class (IEC 34-5): X4D\u003c\/li\u003e\n\u003cli\u003eInsulation class (IEC 85): F\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnergy (EEI): 0.20\u003c\/li\u003e\n\u003cli\u003eNet weight: 16.3 kg\u003c\/li\u003e\n\u003cli\u003eGross weight: 17.7 kg\u003c\/li\u003e\n\u003cli\u003eShipping volume: 0.039 m³\u003c\/li\u003e\n\u003cli\u003eCountry of origin: DE\u003c\/li\u003e\n\u003cli\u003eCustom tariff no.: 84137030\u003c\/li\u003e\n\u003cli\u003eEnvironmental approvals: CN ROHS,WEEE\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839333888267,"sku":"GRU00001830","price":1198.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00001830.png?v=1769102669"},{"product_id":"grundfos-magna1-40-120-f-99221305","title":"Grundfos MAGNA1 40-120 F - 99221305","description":"\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/99234565_09.2023_MAGNA1_DB_GB.pdf?v=1768949236\" target=\"_blank\" title=\"Grundfos MAGNA1 Model C Databooklet\" rel=\"noopener\"\u003eGrundfos MAGNA1 Model C Databooklet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe Grundfos MAGNA1 circulator pump is the simple option for a job well done. With its high energy efficiency, the product complies with the EuP 2015 regulations, ensuring substantial savings on electricity. With its intuitive, user-friendly interface and maintenance-free design, MAGNA1 is the ideal circulator pump for basic performance needs in applications where basic system control and monitoring are desired.\u003c\/p\u003e\n\u003cp\u003eWith this range of circulator pumps, everything from setup to basic control and monitoring are made easy. The pump is maintenance-free due to the canned-rotor type design. MAGNA1 offers the possibility of monitoring the pump via the fault relay output. The digital start and stop input remotely controls the pump. The pump communicates wirelessly with the Grundfos GO Remote app. MAGNA1 can work as the main pump in both heating and cooling applications, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003emixing loops\u003c\/li\u003e\n\u003cli\u003eheating surfaces\u003c\/li\u003e\n\u003cli\u003eair conditioning surfaces\u003c\/li\u003e\n\u003cli\u003eground-source heat pump systems\u003c\/li\u003e\n\u003cli\u003esmall chiller applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMAGNA1 is a single-phase pump characterised by the controller and operating panel being integrated in the control box. The pump housing is available in both cast-iron and stainless-steel versions. The composite rotor can is carbon-fibre reinforced, the bearing plate and rotor cladding are made of stainless steel and the stator housing is made of aluminium. The power electronics are air-cooled.\u003c\/p\u003e\n\u003cp\u003eThe pump incorporates a 4-pole synchronous, permanent-magnet motor (PM motor). This motor type is characterised by higher efficiency than a conventional asynchronous squirrel-cage motor. The pump speed is controlled by an integrated frequency converter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\n\u003cli\u003eLiquid temperature range: -10 .. 110 °C\u003c\/li\u003e\n\u003cli\u003eSelected liquid temperature: 60 °C\u003c\/li\u003e\n\u003cli\u003eDensity: 983.2 kg\/m³\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum head: 120 dm\u003c\/li\u003e\n\u003cli\u003eTF class: 110\u003c\/li\u003e\n\u003cli\u003eApprovals: CE,VDE,EAC,MOROCCO,UKCA,TSE,RCM,UkrSEPRO\u003c\/li\u003e\n\u003cli\u003eModel: C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump housing: Cast iron\u003c\/li\u003e\n\u003cli\u003eEN 1561 EN-GJL-200\u003c\/li\u003e\n\u003cli\u003eASTM A48-200B\u003c\/li\u003e\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRange of ambient temperature: 0 .. 40 °C\u003c\/li\u003e\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\n\u003cli\u003eType of connection: DN\u003c\/li\u003e\n\u003cli\u003eSize of connection: DN 40\u003c\/li\u003e\n\u003cli\u003ePressure rating for connection: PN 6\/10\u003c\/li\u003e\n\u003cli\u003ePort-to-port length: 220mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum power input - P1: 463 W\u003c\/li\u003e\n\u003cli\u003eP1 min: 15.01 W\u003c\/li\u003e\n\u003cli\u003eMains frequency: 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eRated voltage: 1 x 230 V\u003c\/li\u003e\n\u003cli\u003eMinimum current consumption: 0.18 A\u003c\/li\u003e\n\u003cli\u003eMaximum current consumption: 2.05 A\u003c\/li\u003e\n\u003cli\u003eMaximum speed: 4034 rpm\u003c\/li\u003e\n\u003cli\u003eEnclosure class (IEC 34-5): X4D\u003c\/li\u003e\n\u003cli\u003eInsulation class (IEC 85): F\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnergy (EEI): 0.20\u003c\/li\u003e\n\u003cli\u003eNet weight: 16 kg\u003c\/li\u003e\n\u003cli\u003eGross weight: 17.5 kg\u003c\/li\u003e\n\u003cli\u003eShipping volume: 0.039 m³\u003c\/li\u003e\n\u003cli\u003eCountry of origin: DE\u003c\/li\u003e\n\u003cli\u003eCustom tariff no.: 84137030\u003c\/li\u003e\n\u003cli\u003eEnvironmental approvals: CN ROHS,WEEE\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839333921035,"sku":"GRU00001840","price":1331.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00001840.png?v=1769102669"},{"product_id":"grundfos-magna1-d-40-80-f-99221308","title":"Grundfos MAGNA1 D 40-80 F - 99221308","description":"\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/99234565_09.2023_MAGNA1_DB_GB.pdf?v=1768949236\" target=\"_blank\" title=\"Grundfos MAGNA1 Model C Databooklet\" rel=\"noopener\"\u003eGrundfos MAGNA1 Model C Databooklet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe Grundfos MAGNA1 D circulator pump is the simple option for a job well done. With its high energy efficiency, the product complies with the EuP 2015 regulations, ensuring substantial savings on electricity. With its intuitive, user-friendly interface and maintenance-free design, MAGNA1 D is the ideal circulator pump for basic performance needs in applications where basic system control and monitoring are desired.\u003c\/p\u003e\n\u003cp\u003eWith this range of circulator pumps, everything from setup to basic control and monitoring are made easy. The pump is maintenance-free due to the canned-rotor type design. MAGNA1 D offers peace of mind due to the security of supply obtained by having a redundant pump, resulting in improved uptime. The flow, and thereby constant comfort, is secured because of its ability to automatically switch between pump heads if one breaks down. The two pumps communicate wirelessly. MAGNA1 D offers the possibility of monitoring the pump via the fault relay output. The digital start and stop input remotely controls the pump. The pump communicates wirelessly with the Grundfos GO Remote app and can also communicate via radio. MAGNA1 D can work as the main pump in both heating and cooling applications, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003emixing loops\u003c\/li\u003e\n\u003cli\u003eheating surfaces\u003c\/li\u003e\n\u003cli\u003eair conditioning surfaces\u003c\/li\u003e\n\u003cli\u003eground-source heat pump systems\u003c\/li\u003e\n\u003cli\u003esmall chiller applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMAGNA1 D is a single-phase pump characterised by the controller and operating panel being integrated in the control box. The pump housing is available in both cast-iron and stainless-steel versions. The composite rotor can is carbon-fibre reinforced, the bearing plate and rotor cladding are made of stainless steel and the stator housing is made of aluminium. The power electronics are air-cooled.\u003c\/p\u003e\n\u003cp\u003eThe pump incorporates a 4-pole synchronous, permanent-magnet motor (PM motor). This motor type is characterised by higher efficiency than a conventional asynchronous squirrel-cage motor. The pump speed is controlled by an integrated frequency converter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\n\u003cli\u003eLiquid temperature range: -10 .. 110 °C\u003c\/li\u003e\n\u003cli\u003eSelected liquid temperature: 60 °C\u003c\/li\u003e\n\u003cli\u003eDensity: 983.2 kg\/m³\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum head: 80 dm\u003c\/li\u003e\n\u003cli\u003eTF class: 110\u003c\/li\u003e\n\u003cli\u003eApprovals: CE,VDE,EAC,MOROCCO,UKCA,TSE,RCM,UkrSEPRO\u003c\/li\u003e\n\u003cli\u003eModel: C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump housing: Cast iron\u003c\/li\u003e\n\u003cli\u003eEN 1561 EN-GJL-250\u003c\/li\u003e\n\u003cli\u003eASTM A48-250B\u003c\/li\u003e\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRange of ambient temperature: 0 .. 40 °C\u003c\/li\u003e\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\n\u003cli\u003eType of connection: DIN\u003c\/li\u003e\n\u003cli\u003eSize of connection: DN 40\u003c\/li\u003e\n\u003cli\u003ePressure rating for connection: PN 6\/10\u003c\/li\u003e\n\u003cli\u003ePort-to-port length: 220mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum power input - P1: 276 W\u003c\/li\u003e\n\u003cli\u003eP1 min: 18.36 W\u003c\/li\u003e\n\u003cli\u003eMains frequency: 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eRated voltage: 1 x 230 V\u003c\/li\u003e\n\u003cli\u003eMinimum current consumption: 0.2 A\u003c\/li\u003e\n\u003cli\u003eMaximum current consumption: 1.25 A\u003c\/li\u003e\n\u003cli\u003eMaximum speed: 4285 rpm\u003c\/li\u003e\n\u003cli\u003eEnclosure class (IEC 34-5): X4D\u003c\/li\u003e\n\u003cli\u003eInsulation class (IEC 85): F\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnergy (EEI): 0.23\u003c\/li\u003e\n\u003cli\u003eNet weight: 32.4 kg\u003c\/li\u003e\n\u003cli\u003eGross weight: 36.3 kg\u003c\/li\u003e\n\u003cli\u003eShipping volume: 0.087 m³\u003c\/li\u003e\n\u003cli\u003eCountry of origin: DE\u003c\/li\u003e\n\u003cli\u003eCustom tariff no.: 84137030\u003c\/li\u003e\n\u003cli\u003eEnvironmental approvals: CN ROHS,WEEE\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839333953803,"sku":"GRU00001850","price":2639.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00001850.png?v=1769102667"},{"product_id":"grundfos-magna1-d-40-120-f-99221310","title":"Grundfos MAGNA1 D 40-120 F - 99221310","description":"\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/99234565_09.2023_MAGNA1_DB_GB.pdf?v=1768949236\" target=\"_blank\" title=\"Grundfos MAGNA1 Model C Databooklet\" rel=\"noopener\"\u003eGrundfos MAGNA1 Model C Databooklet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe Grundfos MAGNA1 D circulator pump is the simple option for a job well done. With its high energy efficiency, the product complies with the EuP 2015 regulations, ensuring substantial savings on electricity. With its intuitive, user-friendly interface and maintenance-free design, MAGNA1 D is the ideal circulator pump for basic performance needs in applications where basic system control and monitoring are desired.\u003c\/p\u003e\n\u003cp\u003eWith this range of circulator pumps, everything from setup to basic control and monitoring are made easy. The pump is maintenance-free due to the canned-rotor type design. MAGNA1 D offers peace of mind due to the security of supply obtained by having a redundant pump, resulting in improved uptime. The flow, and thereby constant comfort, is secured because of its ability to automatically switch between pump heads if one breaks down. The two pumps communicate wirelessly. MAGNA1 D offers the possibility of monitoring the pump via the fault relay output. The digital start and stop input remotely controls the pump. The pump communicates wirelessly with the Grundfos GO Remote app and can also communicate via radio. MAGNA1 D can work as the main pump in both heating and cooling applications, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003emixing loops\u003c\/li\u003e\n\u003cli\u003eheating surfaces\u003c\/li\u003e\n\u003cli\u003eair conditioning surfaces\u003c\/li\u003e\n\u003cli\u003eground-source heat pump systems\u003c\/li\u003e\n\u003cli\u003esmall chiller applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMAGNA1 D is a single-phase pump characterised by the controller and operating panel being integrated in the control box. The pump housing is available in both cast-iron and stainless-steel versions. The composite rotor can is carbon-fibre reinforced, the bearing plate and rotor cladding are made of stainless steel and the stator housing is made of aluminium. The power electronics are air-cooled.\u003c\/p\u003e\n\u003cp\u003eThe pump incorporates a 4-pole synchronous, permanent-magnet motor (PM motor). This motor type is characterised by higher efficiency than a conventional asynchronous squirrel-cage motor. The pump speed is controlled by an integrated frequency converter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\n\u003cli\u003eLiquid temperature range: -10 .. 110 °C\u003c\/li\u003e\n\u003cli\u003eSelected liquid temperature: 60 °C\u003c\/li\u003e\n\u003cli\u003eDensity: 983.2 kg\/m³\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum head: 120 dm\u003c\/li\u003e\n\u003cli\u003eTF class: 110\u003c\/li\u003e\n\u003cli\u003eApprovals: CE,VDE,EAC,MOROCCO,UKCA,TSE,RCM,UkrSEPRO\u003c\/li\u003e\n\u003cli\u003eModel: C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump housing: Cast iron\u003c\/li\u003e\n\u003cli\u003eEN 1561 EN-GJL-250\u003c\/li\u003e\n\u003cli\u003eASTM A48-250B\u003c\/li\u003e\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRange of ambient temperature: 0 .. 40 °C\u003c\/li\u003e\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\n\u003cli\u003eType of connection: DIN\u003c\/li\u003e\n\u003cli\u003eSize of connection: DN 40\u003c\/li\u003e\n\u003cli\u003ePressure rating for connection: PN 6\/10\u003c\/li\u003e\n\u003cli\u003ePort-to-port length: 250 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum power input - P1: 476 W\u003c\/li\u003e\n\u003cli\u003eP1 min: 17.03 W\u003c\/li\u003e\n\u003cli\u003eMains frequency: 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eRated voltage: 1 x 230 V\u003c\/li\u003e\n\u003cli\u003eMinimum current consumption: 0.19 A\u003c\/li\u003e\n\u003cli\u003eMaximum current consumption: 2.1 A\u003c\/li\u003e\n\u003cli\u003eMaximum speed: 4034 rpm\u003c\/li\u003e\n\u003cli\u003eEnclosure class (IEC 34-5): X4D\u003c\/li\u003e\n\u003cli\u003eInsulation class (IEC 85): F\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnergy (EEI): 0.22\u003c\/li\u003e\n\u003cli\u003eNet weight: 31.6 kg\u003c\/li\u003e\n\u003cli\u003eGross weight: 35.5 kg\u003c\/li\u003e\n\u003cli\u003eShipping volume: 0.087 m³\u003c\/li\u003e\n\u003cli\u003eCountry of origin: DE\u003c\/li\u003e\n\u003cli\u003eCustom tariff no.: 84137030\u003c\/li\u003e\n\u003cli\u003eEnvironmental approvals: CN ROHS,WEEE\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839333986571,"sku":"GRU00001860","price":2778.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00001860.png?v=1769102667"},{"product_id":"grundfos-magna1-50-60-f-99221333","title":"Grundfos MAGNA1 50-60 F - 99221333","description":"\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/99234565_09.2023_MAGNA1_DB_GB.pdf?v=1768949236\" target=\"_blank\" title=\"Grundfos MAGNA1 Model C Databooklet\" rel=\"noopener\"\u003eGrundfos MAGNA1 Model C Databooklet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe Grundfos MAGNA1 circulator pump is the simple option for a job well done. With its high energy efficiency, the product complies with the EuP 2015 regulations, ensuring substantial savings on electricity. With its intuitive, user-friendly interface and maintenance-free design, MAGNA1 is the ideal circulator pump for basic performance needs in applications where basic system control and monitoring are desired.\u003c\/p\u003e\n\u003cp\u003eWith this range of circulator pumps, everything from setup to basic control and monitoring are made easy. The pump is maintenance-free due to the canned-rotor type design. MAGNA1 offers the possibility of monitoring the pump via the fault relay output. The digital start and stop input remotely controls the pump. The pump communicates wirelessly with the Grundfos GO Remote app. MAGNA1 can work as the main pump in both heating and cooling applications, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003emixing loops\u003c\/li\u003e\n\u003cli\u003eheating surfaces\u003c\/li\u003e\n\u003cli\u003eair conditioning surfaces\u003c\/li\u003e\n\u003cli\u003eground-source heat pump systems\u003c\/li\u003e\n\u003cli\u003esmall chiller applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMAGNA1 is a single-phase pump characterised by the controller and operating panel being integrated in the control box. The pump housing is available in both cast-iron and stainless-steel versions. The composite rotor can is carbon-fibre reinforced, the bearing plate and rotor cladding are made of stainless steel and the stator housing is made of aluminium. The power electronics are air-cooled.\u003c\/p\u003e\n\u003cp\u003eThe pump incorporates a 4-pole synchronous, permanent-magnet motor (PM motor). This motor type is characterised by higher efficiency than a conventional asynchronous squirrel-cage motor. The pump speed is controlled by an integrated frequency converter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\n\u003cli\u003eLiquid temperature range: -10 .. 110 °C\u003c\/li\u003e\n\u003cli\u003eSelected liquid temperature: 60 °C\u003c\/li\u003e\n\u003cli\u003eDensity: 983.2 kg\/m³\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum head: 60 dm\u003c\/li\u003e\n\u003cli\u003eTF class: 110\u003c\/li\u003e\n\u003cli\u003eApprovals: CE,VDE,EAC,MOROCCO,UKCA,TSE,RCM,UkrSEPRO\u003c\/li\u003e\n\u003cli\u003eModel: C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump housing: Cast iron\u003c\/li\u003e\n\u003cli\u003eEN 1561 EN-GJL-250\u003c\/li\u003e\n\u003cli\u003eASTM A48-250B\u003c\/li\u003e\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRange of ambient temperature: 0 .. 40 °C\u003c\/li\u003e\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\n\u003cli\u003eType of connection: DN\u003c\/li\u003e\n\u003cli\u003eSize of connection: DN 50\u003c\/li\u003e\n\u003cli\u003ePressure rating for connection: PN 6\/10\u003c\/li\u003e\n\u003cli\u003ePort-to-port length: 240mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum power input - P1: 252 W\u003c\/li\u003e\n\u003cli\u003eP1 min: 20.91 W\u003c\/li\u003e\n\u003cli\u003eMains frequency: 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eRated voltage: 1 x 230 V\u003c\/li\u003e\n\u003cli\u003eMinimum current consumption: 0.22 A\u003c\/li\u003e\n\u003cli\u003eMaximum current consumption: 1.15 A\u003c\/li\u003e\n\u003cli\u003eMaximum speed: 3370 rpm\u003c\/li\u003e\n\u003cli\u003eEnclosure class (IEC 34-5): X4D\u003c\/li\u003e\n\u003cli\u003eInsulation class (IEC 85): F\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnergy (EEI): 0.20\u003c\/li\u003e\n\u003cli\u003eNet weight: 17.4 kg\u003c\/li\u003e\n\u003cli\u003eGross weight: 19.3 kg\u003c\/li\u003e\n\u003cli\u003eShipping volume: 0.046 m³\u003c\/li\u003e\n\u003cli\u003eCountry of origin: DE\u003c\/li\u003e\n\u003cli\u003eCustom tariff no.: 84137030\u003c\/li\u003e\n\u003cli\u003eEnvironmental approvals: CN ROHS,WEEE\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839334019339,"sku":"GRU00001870","price":1412.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00001870.png?v=1769102669"},{"product_id":"grundfos-magna1-50-120-f-99221336","title":"Grundfos MAGNA1 50-120 F - 99221336","description":"\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/99234565_09.2023_MAGNA1_DB_GB.pdf?v=1768949236\" target=\"_blank\" title=\"Grundfos MAGNA1 Model C Databooklet\" rel=\"noopener\"\u003eGrundfos MAGNA1 Model C Databooklet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe Grundfos MAGNA1 circulator pump is the simple option for a job well done. With its high energy efficiency, the product complies with the EuP 2015 regulations, ensuring substantial savings on electricity. With its intuitive, user-friendly interface and maintenance-free design, MAGNA1 is the ideal circulator pump for basic performance needs in applications where basic system control and monitoring are desired.\u003c\/p\u003e\n\u003cp\u003eWith this range of circulator pumps, everything from setup to basic control and monitoring are made easy. The pump is maintenance-free due to the canned-rotor type design. MAGNA1 offers the possibility of monitoring the pump via the fault relay output. The digital start and stop input remotely controls the pump. The pump communicates wirelessly with the Grundfos GO Remote app. MAGNA1 can work as the main pump in both heating and cooling applications, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003emixing loops\u003c\/li\u003e\n\u003cli\u003eheating surfaces\u003c\/li\u003e\n\u003cli\u003eair conditioning surfaces\u003c\/li\u003e\n\u003cli\u003eground-source heat pump systems\u003c\/li\u003e\n\u003cli\u003esmall chiller applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMAGNA1 is a single-phase pump characterised by the controller and operating panel being integrated in the control box. The pump housing is available in both cast-iron and stainless-steel versions. The composite rotor can is carbon-fibre reinforced, the bearing plate and rotor cladding are made of stainless steel and the stator housing is made of aluminium. The power electronics are air-cooled.\u003c\/p\u003e\n\u003cp\u003eThe pump incorporates a 4-pole synchronous, permanent-magnet motor (PM motor). This motor type is characterised by higher efficiency than a conventional asynchronous squirrel-cage motor. The pump speed is controlled by an integrated frequency converter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\n\u003cli\u003eLiquid temperature range: -10 .. 110 °C\u003c\/li\u003e\n\u003cli\u003eSelected liquid temperature: 60 °C\u003c\/li\u003e\n\u003cli\u003eDensity: 983.2 kg\/m³\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum head: 120 dm\u003c\/li\u003e\n\u003cli\u003eTF class: 110\u003c\/li\u003e\n\u003cli\u003eApprovals: CE,VDE,EAC,MOROCCO,UKCA,TSE,RCM,UkrSEPRO\u003c\/li\u003e\n\u003cli\u003eModel: C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump housing: Cast iron\u003c\/li\u003e\n\u003cli\u003eEN 1561 EN-GJL-250\u003c\/li\u003e\n\u003cli\u003eASTM A48-250B\u003c\/li\u003e\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRange of ambient temperature: 0 .. 40 °C\u003c\/li\u003e\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\n\u003cli\u003eType of connection: DN\u003c\/li\u003e\n\u003cli\u003eSize of connection: DN 50\u003c\/li\u003e\n\u003cli\u003ePressure rating for connection: PN 6\/10\u003c\/li\u003e\n\u003cli\u003ePort-to-port length: 280 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum power input - P1: 533 W\u003c\/li\u003e\n\u003cli\u003eP1 min: 20.2 W\u003c\/li\u003e\n\u003cli\u003eMains frequency: 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eRated voltage: 1 x 230 V\u003c\/li\u003e\n\u003cli\u003eMinimum current consumption: 0.22 A\u003c\/li\u003e\n\u003cli\u003eMaximum current consumption: 2.37 A\u003c\/li\u003e\n\u003cli\u003eMaximum speed: 4188 rpm\u003c\/li\u003e\n\u003cli\u003eEnclosure class (IEC 34-5): X4D\u003c\/li\u003e\n\u003cli\u003eInsulation class (IEC 85): F\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnergy (EEI): 0.20\u003c\/li\u003e\n\u003cli\u003eNet weight: 18 kg\u003c\/li\u003e\n\u003cli\u003eGross weight: 19.6 kg\u003c\/li\u003e\n\u003cli\u003eShipping volume: 0.046 m³\u003c\/li\u003e\n\u003cli\u003eCountry of origin: DE\u003c\/li\u003e\n\u003cli\u003eCustom tariff no.: 84137030\u003c\/li\u003e\n\u003cli\u003eEnvironmental approvals: CN ROHS,WEEE\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839334052107,"sku":"GRU00001880","price":1737.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00001880.png?v=1769102669"},{"product_id":"grundfos-alpha1-15-50-n-130-99415696","title":"Grundfos ALPHA1 15-50 N 130 - 99415696","description":"\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/99352875_11.2020_ALPHA1_DB_GB_Internet.pdf?v=1769068108\" target=\"_blank\" title=\"Grundfos ALPHA1 Model B Databooklet\" rel=\"noopener\"\u003eGrundfos ALPHA1 Model B Databooklet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eGrundfos ALPHA1 high-efficiency circulator pumps are designed for circulating liquids in heating systems. The stainless-steel variant of ALPHA1 is suitable for, for example, domestic hot-water systems. With an energy efficiency index (EEI) at the ErP benchmark for most efficient pumps, it contributes to energy savings.\u003c\/p\u003e\n\u003cp\u003eThe pump can operate in proportional-pressure, constant-pressure and constant-curve mode. The control mode is selected using the button on the display. The LEDs indicate the operating status, actual power consumption in watts as well as warnings and alarms.\u003c\/p\u003e\n\u003cp\u003eThe design and materials of the pump contribute to a long service life. The pump is self-venting through the system, which contributes to easy commissioning. The compact design, featuring a pump head with an integrated control box, fits into most common installations. The pump and motor form an integral unit without a shaft seal. The bearings are lubricated by the pumped liquid. These design features ensure maintenance-free operation.\u003c\/p\u003e\n\u003cp\u003ePump housings made of cast iron are electrocoated to improve corrosion resistance. The motor is a synchronous permanent-magnet\/compact-stator motor characterised by high efficiency. Pump speed is controlled by an integrated frequency converter incorporated in the control box.\u003c\/p\u003e\n\u003cp\u003ePumps are supplied with insulating shells to minimise heat loss in heating systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\n\u003cli\u003eLiquid temperature range: 2 .. 110 °C\u003c\/li\u003e\n\u003cli\u003eSelected liquid temperature: 60 °C\u003c\/li\u003e\n\u003cli\u003eDensity: 983.2 kg\/m³\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRated flow: 1.5 m³\/h\u003c\/li\u003e\n\u003cli\u003eRated head: 2.8 m\u003c\/li\u003e\n\u003cli\u003eMaximum head: 50 dm\u003c\/li\u003e\n\u003cli\u003eTF class: 110\u003c\/li\u003e\n\u003cli\u003eApprovals: CE,VDE,UKCA\u003c\/li\u003e\n\u003cli\u003eModel: B\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump housing: Stainless steel\u003c\/li\u003e\n\u003cli\u003eEN 1.4308\u003c\/li\u003e\n\u003cli\u003eASTM A48M-150B\u003c\/li\u003e\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\n\u003cli\u003ePES 30% GF + PESU-GF20%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRange of ambient temperature: 0 .. 40 °C\u003c\/li\u003e\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\n\u003cli\u003eType of connection: G\u003c\/li\u003e\n\u003cli\u003eSize of connection: 1 1\/2 inch\u003c\/li\u003e\n\u003cli\u003ePressure rating for connection: PN 10\u003c\/li\u003e\n\u003cli\u003ePort-to-port length: 130 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum power input - P1: 3 W\u003c\/li\u003e\n\u003cli\u003ePowe input P1: 26 W\u003c\/li\u003e\n\u003cli\u003eMains frequency: 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eRated voltage: 1 x 230 V\u003c\/li\u003e\n\u003cli\u003eMaximum current consumption: 0.04 .. 0.24 A\u003c\/li\u003e\n\u003cli\u003eEnclosure class (IEC 34-5): X4D\u003c\/li\u003e\n\u003cli\u003eInsulation class (IEC 85): F\u003c\/li\u003e\n\u003cli\u003eThermal protec: ELEC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnergy (EEI): 0.20\u003c\/li\u003e\n\u003cli\u003eNet weight: 2.04 kg\u003c\/li\u003e\n\u003cli\u003eGross weight: 2.2 kg\u003c\/li\u003e\n\u003cli\u003eShipping volume: 0.004 m³\u003c\/li\u003e\n\u003cli\u003eCountry of origin: DK\u003c\/li\u003e\n\u003cli\u003eCustom tariff no.: 84137030\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839334117643,"sku":"GRU00001900","price":439.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00001900.png?v=1769102668"},{"product_id":"grundfos-upa-15-90-n-99539153","title":"Grundfos UPA 15-90 N - 99539153","description":"\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/98715166_0924_UPA_Home_Booster_DB_GB.pdf?v=1769069516\" target=\"_blank\" title=\"Grundfos UPA Home Booster Databooklet\" rel=\"noopener\"\u003eGrundfos UPA Home Booster Databooklet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eGrundfos UPA 15-90 N is a domestic booster designed for pressure boosting of drinking water supplied from an external source in residential homes. The UPA booster pumps increase the pressure of domestic water to make the required pressure available at showers, taps and other tapping points.\u003c\/p\u003e\n\u003cp\u003eThis pump has an inlet and outlet port of 3\/4 inch. The pressure rating of the pump corresponds to PN 10 and a port-to-port length of 160 mm. The UPA 15-90 N provides the comfort of constant water pressure with automatic start and stop. This is controlled by the integrated flow switch ensuring optimal start and stop of the booster pump according to demand. The design is robust and built upon corrosion-free materials and stainless-steel pump housing to ensure a long service life. The pump is a canned-rotor pump type where pump and motor form an integral unit without shaft seal. This pump must always be installed with horizontal motor shaft. This booster has a 2-pole asynchronous squirrel-cage motor with built-in impedance protection and short-circuit proof. The bearings are lubricated by the pumped liquid. These design features ensure maintenance-free operation. The pump has the following approvals CE,WEEE,UKCA-UPA. This pump is also drinking water approved.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIntegrated flow switch: Automatic start and stop according to demand\u003c\/li\u003e\n\u003cli\u003eLow noise level\u003c\/li\u003e\n\u003cli\u003eEasy installation: plug and pump, compact inline booster\u003c\/li\u003e\n\u003cli\u003eIntegrated non-return valve\u003c\/li\u003e\n\u003cli\u003eImproved corrosion resistance\u003c\/li\u003e\n\u003cli\u003eBuilt-in motor protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eControls:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlow switch (Yes\/No): Y\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\n\u003cli\u003eLiquid temperature range: 2 .. 95 °C\u003c\/li\u003e\n\u003cli\u003eSelected liquid temperature: 60 °C\u003c\/li\u003e\n\u003cli\u003eDensity: 983.2 kg\/m³\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRated flow: 0.98 m³\/h\u003c\/li\u003e\n\u003cli\u003eRated head: 5.462 m\u003c\/li\u003e\n\u003cli\u003eTF class: 95\u003c\/li\u003e \n\u003cli\u003eApprovals: CE,WEEE,UKCA-UPA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump housing: Stainless steel\u003c\/li\u003e\n\u003cli\u003eEN 1.4308\u003c\/li\u003e\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\n\u003cli\u003ePP-GF30\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRange of ambient temperature: 0 .. 40 °C\u003c\/li\u003e\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\n\u003cli\u003ePipe connection standard: ISO 228-1\u003c\/li\u003e\n\u003cli\u003eType of connection: G\u003c\/li\u003e\n\u003cli\u003eSize of connection: 3\/4 inch\u003c\/li\u003e\n\u003cli\u003ePressure rating for connection: PN 10\u003c\/li\u003e\n\u003cli\u003ePort-to-port length: 160 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMax. power input: 120 W\u003c\/li\u003e\n\u003cli\u003eMains frequency: 50 Hz\u003c\/li\u003e\n\u003cli\u003eRated voltage: 1 x 230 V\u003c\/li\u003e\n\u003cli\u003eMaximum current consumption: 0.48 A\u003c\/li\u003e\n\u003cli\u003eCapacitor size - run: 2.5 µF\u003c\/li\u003e\n\u003cli\u003eEnclosure class (IEC 34-5): X2D\u003c\/li\u003e\n\u003cli\u003eInsulation class (IEC 85): H\u003c\/li\u003e\n\u003cli\u003eEx-protection standard: NONE\u003c\/li\u003e\n\u003cli\u003ePower plug: UK plug\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNet weight: 2.69 kg\u003c\/li\u003e\n\u003cli\u003eGross weight: 3.24 kg\u003c\/li\u003e\n\u003cli\u003eShipping volume: 0.0042 m³\u003c\/li\u003e\n\u003cli\u003eCountry of origin: CN\u003c\/li\u003e\n\u003cli\u003eCustom tariff no.: 84137030\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839334281483,"sku":"GRU00001950","price":236.89,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00001950.png?v=1769102668"},{"product_id":"grundfos-upm3-auto-15-50-130-zzz-93370530","title":"Grundfos UPM3 AUTO 15-50 130 ZZZ - 93370530","description":"\u003cp\u003eUPM3 AUTO is an OEM high-efficiency self-controlled circulator with constant control modes and the unique AUTOADAPT mode. The product is optimal for underfloor heating, various heating kits or integration in heating systems with constant or minor flow variations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eControls:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTerminal box position: 9H\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\n\u003cli\u003eLiquid temperature range: 2 .. 110 °C\u003c\/li\u003e\n\u003cli\u003eSelected liquid temperature: 60 °C\u003c\/li\u003e\n\u003cli\u003eDensity: 983.2 kg\/m³\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum head: 50 dm\u003c\/li\u003e\n\u003cli\u003eTF class: 95\u003c\/li\u003e \n\u003cli\u003eApprovals: CE,VDE\u003c\/li\u003e\n\u003cli\u003eModel: W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum ambient temperature: 70 °C\u003c\/li\u003e\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\n\u003cli\u003ePort-to-port length: 160 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower input - P1: 4 .. 33 W\u003c\/li\u003e\n\u003cli\u003eMains frequency: 50 \/ 60 Hz\u003c\/li\u003e\n\u003cli\u003eRated voltage: 1 x 230 V\u003c\/li\u003e\n\u003cli\u003eMaximum current consumption: 0.06 .. 0.36 A\u003c\/li\u003e\n\u003cli\u003eEnclosure class (IEC 34-5): IP44\u003c\/li\u003e\n\u003cli\u003eThermal protec: ELEC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnergy (EEI): 0.20\u003c\/li\u003e\n\u003cli\u003eNet weight: 1.82 kg\u003c\/li\u003e\n\u003cli\u003eGross weight: 3.24 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839334609163,"sku":"GRU00002010","price":98.22,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00002010.png?v=1769102668"},{"product_id":"grundfos-magna1-32-100-f-99221237","title":"Grundfos MAGNA1 32-100 F - 99221237","description":"\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/99234565_09.2023_MAGNA1_DB_GB.pdf?v=1768949236\" target=\"_blank\" title=\"Grundfos MAGNA1 Model C Databooklet\" rel=\"noopener\"\u003eGrundfos MAGNA1 Model C Databooklet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe Grundfos MAGNA1 circulator pump is the simple option for a job well done. With its high energy efficiency, the product complies with the EuP 2015 regulations, ensuring substantial savings on electricity. With its intuitive, user-friendly interface and maintenance-free design, MAGNA1 is the ideal circulator pump for basic performance needs in applications where basic system control and monitoring are desired.\u003c\/p\u003e\n\u003cp\u003eWith this range of circulator pumps, everything from setup to basic control and monitoring are made easy. The pump is maintenance-free due to the canned-rotor type design. MAGNA1 offers the possibility of monitoring the pump via the fault relay output. The digital start and stop input remotely controls the pump. The pump communicates wirelessly with the Grundfos GO Remote app. MAGNA1 can work as the main pump in both heating and cooling applications, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003emixing loops\u003c\/li\u003e\n\u003cli\u003eheating surfaces\u003c\/li\u003e\n\u003cli\u003eair conditioning surfaces\u003c\/li\u003e\n\u003cli\u003eground-source heat pump systems\u003c\/li\u003e\n\u003cli\u003esmall chiller applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMAGNA1 is a single-phase pump characterised by the controller and operating panel being integrated in the control box. The pump housing is available in both cast-iron and stainless-steel versions. The composite rotor can is carbon-fibre reinforced, the bearing plate and rotor cladding are made of stainless steel and the stator housing is made of aluminium. The power electronics are air-cooled.\u003c\/p\u003e\n\u003cp\u003eThe pump incorporates a 4-pole synchronous, permanent-magnet motor (PM motor). This motor type is characterised by higher efficiency than a conventional asynchronous squirrel-cage motor. The pump speed is controlled by an integrated frequency converter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePumped liquid: Water\u003c\/li\u003e\n\u003cli\u003eLiquid temperature range: -10 .. 110 °C\u003c\/li\u003e\n\u003cli\u003eSelected liquid temperature: 60 °C\u003c\/li\u003e\n\u003cli\u003eDensity: 983.2 kg\/m³\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum head: 100 dm\u003c\/li\u003e\n\u003cli\u003eTF class: 110\u003c\/li\u003e\n\u003cli\u003eApprovals: CE,VDE,EAC,MOROCCO,UKCA,TSE,RCM,UkrSEPRO\u003c\/li\u003e\n\u003cli\u003eModel: C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump housing: Cast iron\u003c\/li\u003e\n\u003cli\u003eEN 1561 EN-GJL-200\u003c\/li\u003e\n\u003cli\u003eASTM A48-200B\u003c\/li\u003e\n\u003cli\u003eImpeller: Composite\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRange of ambient temperature: 0 .. 40 °C\u003c\/li\u003e\n\u003cli\u003eMaximum operating pressure: 10 bar\u003c\/li\u003e\n\u003cli\u003eType of connection: DN\u003c\/li\u003e\n\u003cli\u003eSize of connection: DN 32\u003c\/li\u003e\n\u003cli\u003ePressure rating for connection: PN 6\/10\u003c\/li\u003e\n\u003cli\u003ePort-to-port length: 220 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical data:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum power input - P1: 175 W\u003c\/li\u003e\n\u003cli\u003eP1 min: 8 W\u003c\/li\u003e\n\u003cli\u003eMains frequency: 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eRated voltage: 1 x 230 V\u003c\/li\u003e\n\u003cli\u003eMinimum current consumption: 0.08 A\u003c\/li\u003e\n\u003cli\u003eMaximum current consumption: 1.41 A\u003c\/li\u003e\n\u003cli\u003eMaximum speed: 4534 rpm\u003c\/li\u003e\n\u003cli\u003eEnclosure class (IEC 34-5): X4D\u003c\/li\u003e\n\u003cli\u003eInsulation class (IEC 85): F\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOthers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnergy (EEI): 0.20\u003c\/li\u003e\n\u003cli\u003eNet weight: 7.44 kg\u003c\/li\u003e\n\u003cli\u003eGross weight: 8.2 kg\u003c\/li\u003e\n\u003cli\u003eShipping volume: 0.016 m³\u003c\/li\u003e\n\u003cli\u003eCountry of origin: DE\u003c\/li\u003e\n\u003cli\u003eCustom tariff no.: 84137030\u003c\/li\u003e\n\u003cli\u003eEnvironmental approvals: CN ROHS,WEEE\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kings Plumbing Supplies","offers":[{"title":"Default Title","offer_id":52839334641931,"sku":"GRU00002020","price":893.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/9546\/2667\/files\/GRU00002020.png?v=1769102671"}],"url":"https:\/\/plumblikeaking.co.uk\/collections\/grundfos-circulating-pumps.oembed?page=3","provider":"Kings Plumbing Supplies Limited","version":"1.0","type":"link"}